07 Nissan Altima Fujita Intake

[nismoking1994]

sweet sound

[JonSk8rDuDe]

i know this might sound like a noob question but do u have to replace the fujita with the stock air system for Smog Checks??? i hear from some ppl that u dont and some say the fujita intake is illegal here in cali

[importroller]

Fujita is not carb legal. If you are in cali, you must switch back to your stock intake for smog. Or buy the K&N which is carb legal

[TheCrazyRedneck802]

how did u get sponsord jw. cuz I'm getting a 3.5 altima coupe dark gray in a couple weeks. and I might want to try and get performance parts and get sponsored by a couple ppl.

[importroller]

First thing, Join the web forums. Nicoclub and nissanclub. a lot of times the manufacturers will post on the sites that they are looking for a demo car to build parts off of. Second option is to go to meets and events where manufacturers will be, and start networking.

[krono123456]

how can you put down 245 hp at the wheels when i own a 06 350z with 300hp at the crank and 237hp at the wheels?

[importroller]

I'm actually at 261whp currently. I haven't dynoed recently since I put my Y-pipe in, but I suspect I'm about 270whp. FWD doesn't lose as much power as RWD does. We just have horrible traction problems off the line.

[LargeTacticalMike]

probably from the drive train loss associated with rear wheel drive vehicles. The altima dosen't lose as much power because it dosent have to travel a long distance

[importroller]

Recently redynoed the car. I have a vid up, and I'm at 265whp and 256 TQ

[GhostKid0201]

wat all does the intake help or do

[Kairingo]

it gives the engine colder air, more air... adding a tiny bit of performance as well

[DYNO323]

how did u ge tsponsored??

ur car looks stock!

pretty cool though

i mma try to get sponsored too =)

[importroller]

Fujita had advertised that they were looking for a test car to build the intake system. i contacted them, and offered to donate my car for testing and building. I got the first product free, and they use my car on their website to promote the gains, and I intern advertise for them on different forums and at car shows. I did the same with all my sponsors.

[J4SONM]

How do you get sponsored by those companies?

[importroller]

Networking. Going to car shows, talking to the owners and reps of the companies, and offering your car to them for a time frame for them to develop a part. most companies will give you the first part free or will only have you pay for the cost of the materials to build the parts, which a lot of times can be close to a 50% discount over what everyone else pays

[redghost991]

aem is gud .... fujita fuk .. not gud quality .. and best is k&N

[CrialCrial]

Fujita vs. AEM? I"m thinkin bout adding some stuff to my car, I'm wondering, which company is better? Fuijita is cheaper... for 2002 S Altima.. 2.5

[TRELL5044]

I HAVE 08 MAX WILL FUJITA GIVE ME 15HP

[yahong0566]

what about compare to itg?

[importroller]

itg?

[Dubai5089]

(k&N) filter is better or (fujita airs filter)yours??

thnx

[importroller]

Not really sure. Will let you know after K&N is finished with my intake. They just sponsored me too, so I should have the finished product soon

[BIGCHRIS7600]

do you race ur altima or is it a show car?

[bichniga]

Any other mods?

Was the hp increase only due to the WAI?

[importroller]

at the time of this vid, that was the only mods for power

[Assrash23]

i assume that it is on the V6

will it also fit the L4 motor?

[importroller]

the 4cyl is available on the website

[FordRules94]

thats one nice lil altima u got there lol

[EzeebMOS3]

Sounds great, Cant wait to add it once it's available

[DRVR240SX1]

does this work for the 2.5??? and how did u get ur bluebatmobile vinyls???

[missmedude]

I have a 2.5sl, is there one for it? like how much around

[GHdagrk]

Im wanting to put one on my 07 altima but have two questions, is this an easy do-it-yourself instal (e.g. no fabrocating to accomidate sensors, etc...) and does it void any powertrain warranties.

[importroller]

it would take the average DIYer about 10-15 mins to install. there is no need to fabrication needed for it to fit. warranty will not be voided (spoke to tech at dealership) unless the problem with your engine was caused by the intake. Which unless your car was underwater, I dont see what could get in to damage it.

[yamathilde]

sorry for the double post.. i forgot to mention 258lbs-pi

[importroller]

270hp is what the motor puts out. not what is put to the ground. By the time all that power goes through the transmission, then to the axles and then to the wheels, it will be less than what the motor is putting out. this motor is now putting out close to 285-290hp

[F5air]

Awesome! Thanks for the support!

[importroller]

Thanks for the sponsorship! Im loving this intake. Any chance we can work out some kind of heatshield to go with it? Have Brian give me a call if interested. If not, I can fab one up to see if it will help.

[yamathilde]

Altima 2007... isn't 270hp?why 233.14whp?

[locooso]

Quick question I have an INJEN Intake on mine. Does the Fujita give you more power than the Injen?

I thought they would give you the same power since the parent company is Injen.

Thanks

[importroller]

Injen and Fujita are two seperate companies as far as Im aware. Even the design of the intakes are different. I never used the Injen, but its design to me is flawed. they never should have mounted that MAF sensor spot on the top. plus the heat shield doesnt really do anything on this car. all the heat from the motor still surrounds the filter even with the shield

[locooso]

Thanks for the feedback I am seriously thinking about trading my Injen for a Fujita... anyone willing to buy an Injen intake?

[dkillahster]

if it is cheap i'll buy, but i'm broke since gas prices are killing me, ehem.. US!!

[Slimpack4321]

Thats a huge gain from just a warm air intake, this car definitely has potential.