Benchmade 755 MPR "mini pocket rocket"

[spyderboy08]

Hey Bro! Nice review!! Keep it up! This Knife is so nice that I bought one as soon as the video ended. Got mine for 150, IMO its the best deal I got for a knife! Especially one of this caliber! Way to go Benchmade!

[mintyvision]

great review buddy.

[tacticaldaves]

Very nice knife, never had to wait that long for a knife. Love your excitement!

[xilpa]

Do you just collect them or do you actually use them? if you use them, what for?

[tactical2bagpipes]

This knife isn't shit compared to the ZT.

[GSLucas12345]

.................thats def a mini ak knock off

[southernsecurity]

The blade is hard to deploy and snags at the halfway point of opening. I tried this blade out. Handle too small which makes reversing your grip difficult. It's also hard to tactically close in a hurry. I like benchmade for both it's utility and self defense options and this blade ain't it. The belt/pocket is too short. The two pros are the tough titanium blade and the blade's thickness. The flaws ruin this knife. Benchmade should think about a thick no frills first responder fixes blade with a

[venomx4x4]

Nice videos! This review sold me on this knife...can't wait to get mine. Sub'd!

[auradud3]

if it was solid, no cut out, it would be much harder to release the lockup

[iop9709]

pocket brick

[piepeace]

Hello,

I work everyday at an animal shelter and constantly encounter situations where I need a GOOD HIGH QUALITY KNIFE!. Which knife would you recomend for me? I would perfer something a bit heavier. I want something that I will not have to sharpen often and is thick.

[chibraxial]

@2:54 I can see a bur on your edge, on the belly.

Superb knife

[CNCTEMATIC]

lol "deh jah booh". I enjoyed your enthusiasm.

[Max11Seven]

Love your enthusiasm! Keep it up.

[L1NG4N]

the hole in the mono lock is so u can push the lock out to unlock it.

[killroywashere100]

great vid man!

[OneTalaw]

Dude, great review! Nice to see your enthusiasm shines through in the video. I see from the comments, that there is a problem with blade retention with the Benchmade 755 MPR; there must be a way to adjust the retention, because at $235, I can not purchase multiples until I find one that will retain the blade. Any suggestions as to how this blade retention issue can be sorted? Keep up the reviews : -)

[HardyRulez619]

this knife reminds me of the kershaw half ton

[Flash9590]

keep the videos coming!

[Parker4321]

If you have the Spyderc Leaf Storm, can you do a review on it?

[extremestuntmen]

didnt u say u were gonna make another review? wen?

[facatube]

this hole us used to "weak" linners so it can flex to lock/unlock ;-)

[ZWhitford]

Stumbled upon this review while watching a Mnandi review.

Just wanted to say I really enjoyed your review and enthusiasm! Hope you're enjoying the Sibert.

Take care!

[scintil]

Thanks for the review!

[paperas24]

@scintil thanks for watching man!

[RoyalAlba1]

how is the retention of the blade ?? i have just seen a video of this knife and the retention sucked so i wonder how is yours ?

[paperas24]

@RoyalAlba1 I have two 755 the first one sucks but the lates one rocks, I'm going to make a video review talking about this issue. thanks for watching man!

[grimrocker8]

ahh u a terrorist

go back to iraq

[TheBigbrad75]

Does this knive come in Multiple colors or is it just different people's camera's? Just wondering because they all look slightly different, some look teal, some look OD and some look Black? I could really use an educated answer, I am ordering one today and that is something that I really need to know. Thanks, Brad

[paperas24]

@TheBigbrad75 hey Brad this Benchmade version comes in green, not od green but closer. I know there are custom MPR's that use different materials and colors thanks for watching man. your going to love the mpr. I already have two.

[TheBigbrad75]

@paperas24 Hey man, Thanks for the quick answer. I have an update on my purchase for ya. I ended up going with the 15030-1 Bone Collector. My wife is getting it for me for a Father's Day Present and I like it just as much as the MPR and I thought $250 for the MPR (first production) was a little bit much to ask for a father's day present. I've got SpyderCo's but this is my first Benchmade. I'd say I'll end up odering the MPR very soon. You think I made an OK choice going with the Bone Collector?

[TheBigbrad75]

@paperas24 OK, Finally ordered my MPR today! This'll make my third Benchmade, not to mention a few SpyderCo's. I'm also going to order the Gold Class Carbon Fiber Griptilian next week, I am now officially a knife-aholic as well. Do you happen to know where the nearest treatment center is? Thanks...

[tedbratton]

i hoe they come out with the full size

[paperas24]

@tedbratton that would be awesome, a monster pocket knife

[Pwn3dify]

im looking for one great edc knife and this might be perfect great vid

[paperas24]

@Pwn3dify thanks for watching man. I'm ordering another one to edc it lol. it is almost perfect for the eye.

[MediaCop]

The purpose of the monolock release bar hole you question is to allow the titanium to work as a spring. If the metal were thicker you would not be able to bend it. The others answered this question well. I also just got the knife, like it, and agree with the review. Also see Aircat Knives...Dwaine Carillo.

[ntrudr800]

I believe the hole there is so that the metal will bend to lock open the blade. That is what I am thinking, it being a frame lock. This knife reminds me of the look of the KABAR Fin that I saw on their site, but I am sure it is more stout. Thanks for your review

[ILookLikeShreck]

Great review! I also loved the enthusiasm! At 3:30 you asked what the purpose of the notch cut in the liner is. If no one has told you yet, that is where the liner is cut thinner to allow it to flex and let the portion of the liner at the front lock the blade open. .

[oromoto]

So, how do you feel about the knife after using it for some time?

[Monger4142]

I think all frame locks need that hole to work

[PRSpl4yer]

Just to get it out there M390 is the same as Duratech CV20... it's the same composition just under a different name.

[dany1441]

One of the best knife reviews I have ever seen. Why? 'Cause the ENTHUSIASM just exploded off the screen! LOVE IT, AND THE KNIFE TOO!

[paperas24]

@dany1441 lol thanks for the nice comment! I'm still crazy about the blade

[alejandrosantana1991]

I have this knife too its great. Dyou know if this knife is alimited time or limited quantity?

[paperas24]

@alejandrosantana1991 it is a production knife, a very good one rigth?

thanks for watching Alejandro

[MrZotZot]

Wow that is a suuuuper cool knife!!! That handle looks so stout. Niice show off :D

[paperas24]

@MrZotZot thanks for watching man!

[Sharpbevel]

I just got mine the other day. I saw it in a local store and then bought it on eBay. What surprises me most about this knife is the ease to disengage the titanium mono-lock. It is surprisingly sturdy when locked but when you disengage the lock it is quite easy. Zero blade play in any direction. Built like a tank and the combination titanium frame-lock & clip make it very attractive. For the type of cutting I do this is a perfect size for me. So far very satisfied with this knife.

[Hiluxtaco]

It's like Benchmade's version of a Strider!! 0_0

[paperas24]

@Hiluxtaco tes it is man, thanks for watching!

[Sharpbevel]

Dude: Awesome review. Did your accent, too.

[paperas24]

@Sharpbevel hey thanks man! lol

[that515]

I love this knife. Very beefy looking, and your reviews/thoughts on these products are also becoming one of my favs...keep up the good work.

[paperas24]

@that515 thanks for watching man, I really appreciate your comments! I have a ton of work but I will make more vids in a bit

[mishima666]

Very enthusiastic review! I enjoyed the close-up views of the knife. Thanks for posting.

[paperas24]

@mishima666 thanks for watching man!

[1911bladeguy]

A little bit Strideresque.  I likey...

[paperas24]

@1911bladeguy yep! thanks for watching man!

[Jason10481]

wanna sell it to me? :)

[paperas24]

@Jason10481 Jason rigth now you can find it on knifeworks but hurry up cuz they are flying away! thanks for watching man!

[Jason10481]

@paperas24 i got it from ebay!! omg i LOVE this beautiful knife!!

[bankmind80]

Sweet fricking blade man!!! I'm jealous...wish it was ambidextrous. :(

Poor Lefties...HA HA

[paperas24]

@bankmind80 well your rigtn man that part sucks but hopefully they will have one on the future!

[XxXxXGR3GXxXxX]

the hole is called a relief cut... it makes a fixed position for the monolock or framlock to bend on

[paperas24]

@XxXxXGR3GXxXxX thanks man ! I felt stupid for asking

[rezzoro7]

Did you comment that there is a little issue with the blade retention on this knife? Is it tetention very light like the mini dejavoo? I'm really liking the 755, it's so different from the ordinary slick, long, thin, common BM knives, but it's really unique and the more I look at it, the more I like it. Let me know what's going on with the retention and if there are other features that you don't like about the knife. As always, great knife and a great review man. 5/5

[paperas24]

@rezzoro7 hey man, sorry for the late answer, the blade is awesome but yes the retention is not the best feature. very poor retention on the blade. hopefully they will change the future versions.

[IIIsticksone]

That is a beautifull knife. I would like to add it to my collection but I just dont think that I would carry it. It looks built like a tank. Thanks for sharing.

[paperas24]

@IIIsticksone thanks for watching man, buy it you're not going to regret it

[danebow240]

That hole is for the monolock, they have to remove enough material so that the steel will bend a bit otherwise it would not engage

[boxant]

Thanks for posting, makes waiting for mine less painful ;)

[pelahale]

Where did you buy it from - you forgot to say.

[brettofthejungle]

Nice Knife. You ask at one point, what is the point of the little hole in the titanium lock down near the base of the handle. I believe the point of that is to allow the lock to spring and bend. if it was solid you would not be able to unlock the blade.

[PhillieBRidin]

wow, awesome knife, looks like a tank

[gamerfromcanada]

That is such a cool knife!

That looks like a tank. Oh my wallet is going to hate me!

[paperas24]

@gamerfromcanada mine is not talking to me anymore.

[aandrew610]

wow I didnt realize it was really that big, in the catalog it doesnt look like its that large but its definately an amazing looking knife, Thanks for posting

[paperas24]

@aandrew610 yes man it is big, i thought that was a little bit smaller but not. Can you imagine how will look a full version of this knife?

thanks for watching man I hope you have o wonderful weekend.

[aandrew610]

@paperas24 a full sized one would be crazy! lol im tempted to maybe get a 755 now

[nycdave212]

Wow! Great vid for an awesome knife, Man! Glad to see these are finally being released, and congrats on getting one of the First Productions... very cool!

Thanks for the vid, Man!

[paperas24]

@nycdave212 thanks for watching man, it was a long wait but nice at the end. I love your videos man. I never asked but, you how many knives do you have? you have super fancy blades man!

[streetmaster63]

OMG, I knew you'd get this knife first! I want one SO bad. This knife looks like a cross between a Stryder and a Hinderer. My two favorite blades.

[paperas24]

@streetmaster63 you're going to love this blade, I really liked overall man , the only issue is the blade retention. but it is an amazing design! it is a affordable option for the stryder. (it wont never be a Stryder but it makes you happy) Knives are my only addiction

[JohnWayneColt45]

Great Lookin knife bro!!

Much Congrats to you,,you sound really excited bro,I know you love those big knives!!

Thanks for sharing this knife,I was wondering what it really looked like.

[paperas24]

@JohnWayneColt45 lol, I know seriously I was like crazy yesterday. I should wait to make the video. thanks for watching man!

[EDCgearreviews]

Finally they released these! Congrats on the new knife!

[tdegazio]

the hole is so the liner lock bends there

[paperas24]

@tdegazio I know I should wait to make this video lol, tanks for watching man!

[tjsulli790]

Sweet knife, congrats on getting one of the first ones made.

[paperas24]

@tjsulli790 thanks man, I was lucky this time. but the wait was excruciating. thanks for watching.

[Severator]

verrry niiiiicccee!!! I was hoping you would get your soon. The 755 has a real 'tool' quality to it perhaps.

[streetmaster63]

@Severator You KNEW he'd have it first!!

[paperas24]

@Severator I liked overall but it has an issue (after the excitement) blade retention, but it awesome. thanks for watching man, I wish you the best in your new home!

[chrisw40]

very cool

[paperas24]

@chrisw40 thanks for watching man!

[ignoreboco]

Gracias me gusto much el video. Yo estaba esperando un video del 755! Ahora tengo que comprarlo tambien.

[one54cm]

sweet! 5*

[oromoto]

Man, I have been waiting for this knife for months also! Need to get it!!

[mongomondomongo]

haha, your enthusiasm is so apparent in this video. Knife is a little bulky for me, but I think I'll get it anyway.

[mongomondomongo]

Nice video! As Robobob says, they have to remove material from the titanium to make the spring. Otherwise, it won't bend over to lock the blade.

[Robobob10]

Beautiful knife! I think that notch you were wondering about is at that location on the frame lock bar, it makes it easier to move the bar to the unlock (closed) position

[Burson69]

nice blade

[kowboy520]

Che no entendi para que es el agujero misterioso del mango.. Gracias

[startswithC]

aweeeeeesoooommmme! that knife is beautiful!

[JSR990]

you have good taste in blades. nice collection

[paperas24]

@JSR990 thanks man! i really appreciate the comment. thanks for watching.

[redsoxnation32]

sick blade dude. Where are you from? Just wondering?