@pivotboy63 then it's only going to power 1 cylinder. The other will be running on idle, so it will be a big drag on the one that is being given throttle..... why?
@1skiinIan don't only rev one carb. it damages the engine by causing said cylinder to run on a lean fuel/air mix, and as it is a 2 stroke, this will damage and overheat cylinder components... too lean will melt down a piston if it is bad enough.
@1skiinIan whats up with the wireing on this does it need to be hooked up?? i got one last night i am putting on a lawn mower and the wires were all cut what will i have to do to get it to run or will it just run with out them hooked up?
thats a good idea i i did it with a 1979 scorpion 440 engine on a 2 seater gokart/ dunebuggy and its so fun, but i got some chromolly i need to reinforce the frame with.
i want to eventually build a kart when i get the time and room to work on it. i have all the parts though.
its gonna be either a kawasaki 440 fan (60hp) or a liquid cooled 700 reed induction twin. (120hp) i havent decided yet though im pretty sure im gonna use the 700 motor. a-arm suspension up front with disk brakes and swingarm rear suspension with disk brakes. 5 point racing harness and full roll cage.
yes i do...it always runs on 1 cylinder and don't say no you don't without proof im not going to record it because that required getting it out of the snow getting into the garage letting it warm down draining the gas...
I want to find a jet ski engine for my GO KART! I say that becausein Georgia it would bemore likely to find one of those, not a snowmobile engine! We rarely get enough snow to even have a snow ball fight, let alone ride a snowmobile!
Its always a good thing to open them old engines up a bit, break some carbon loose. Old AC we have puffed black chunks at idle, opened her up for a bit and now its nice and clean.
hello! i have a buggy similar as you but i have a problem it makes too much noise it as a ski doo engine too a 340cc bombardier year 1976 help me please! it as the original muffler on it
I have one of these that I got from Ebay- it's going to replace the Sachs SA2-290 currently on my kart now. (Lowrider v2.0). They're a similar size, but the Sachs was a single carb. I wonder how much difference this will make?....
looks like its gonna fly when you get it done. and i love the sound of a ol polaris two stroke. i just wish my dad would let me do/work on a project like that becouse our neighboors have two sleds in there barn just rotting away they said i could just have and there both polaris's but i dont know if they run, but the motors are still there.
well, is it fan cooled? if not, don't even bother. even better would be to find a liquid cooled one and mount the radiator above your head behind your seat.
scrole down and read some of the comments about heat.
300cc is nothing. the biggest 2 stroke snowmobile I have seen and heard of, is 900cc. yamaha makes 1000cc (1L) but they start going 4 stroke after that
i have a 350 on my gocart i bought the thing with a running engine (runs real nice) for $75 the gocart has a full cage on it too i think i got a good deal
ya thanks. well, it was going to be... the go kart project is cancelled :( the drive train was going to be the original cvt clutches and chain and sprocket. This engine is now for sale. I had absolutely everything figured out on the to-be go kart too. just don't have the time in college
That'll make a killer motor on a go kart- most snowmobile motors are pretty small- ive had a few of em- heck my 79 Arctic cat eltigre 500cc motor is about that size. That'll also be a killer drivetrain setup.
ya thanks. well, it was going to be... the go kart project is cancelled :( the drive train was going to be the original cvt clutches and chain and sprocket. This engine is now for sale. I had absolutely everything figured out on the to-be go kart too. just don't have the time in college
cracked air case, spark plugs, fuel filter, and I added a fuel pump. I've got another engine block like this for free, but it is blown and there is really bad cylinder and piston damage. not even worth rebuilding. Now I have to get my lawn tractor working...efficiently
will you use this clutch with the other wheel and a belt on your kart?
iamadness69 1 year ago
yes you can heare it is a gokart engine
thedanesimon 1 year ago
what would happen if you only reved one carb? please respond
pivotboy63 1 year ago
@pivotboy63 then it's only going to power 1 cylinder. The other will be running on idle, so it will be a big drag on the one that is being given throttle..... why?
1skiinIan 1 year ago
@1skiinIan no reason, just wondering
pivotboy63 1 year ago
@1skiinIan don't only rev one carb. it damages the engine by causing said cylinder to run on a lean fuel/air mix, and as it is a 2 stroke, this will damage and overheat cylinder components... too lean will melt down a piston if it is bad enough.
ismokewead420 4 months ago
have u got a frame to put it on yet
dragata1 1 year ago
im doing the same thing but with a 3 cylinder 600cc polaris engine, that should rip wheelies down the street.
hheywire 1 year ago
bet it will blow up a lot too.... get a big rad
1skiinIan 1 year ago
@1skiinIan whats up with the wireing on this does it need to be hooked up?? i got one last night i am putting on a lawn mower and the wires were all cut what will i have to do to get it to run or will it just run with out them hooked up?
OrangeCrushRider22 1 month ago
awsum bro look at my 1 5 stars
roadhog18 2 years ago
i want that engine i want one soo bad for my go kart where can i find a cheap broken down one.
matthewmarrs123 2 years ago
go to your local yamaha and ask for any discarded skidoo engines or something i am buying a 500 yamaha 1980 skidoo engine from yamaha for 200 bucks
blitch7722 2 years ago
does it run though i want one that runs for that much but i don't have the money right now thanks though..
matthewmarrs123 1 year ago
thats a good idea i i did it with a 1979 scorpion 440 engine on a 2 seater gokart/ dunebuggy and its so fun, but i got some chromolly i need to reinforce the frame with.
whatdoboredpeopledo 2 years ago
i want to eventually build a kart when i get the time and room to work on it. i have all the parts though.
its gonna be either a kawasaki 440 fan (60hp) or a liquid cooled 700 reed induction twin. (120hp) i havent decided yet though im pretty sure im gonna use the 700 motor. a-arm suspension up front with disk brakes and swingarm rear suspension with disk brakes. 5 point racing harness and full roll cage.
Turbojeep23 2 years ago
I wanna put my Kawasaki 340cc drifter in a Go-kart but every year you have to rebuild the engine
w1ldyovvnz 2 years ago
@w1ldyovvnz no u dont
aarpaz 2 years ago
yes i do...it always runs on 1 cylinder and don't say no you don't without proof im not going to record it because that required getting it out of the snow getting into the garage letting it warm down draining the gas...
w1ldyovvnz 2 years ago
I want to find a jet ski engine for my GO KART! I say that becausein Georgia it would bemore likely to find one of those, not a snowmobile engine! We rarely get enough snow to even have a snow ball fight, let alone ride a snowmobile!
Motorfordtoyota 2 years ago
I got a 440 engine for the go kart we are building.... We got it rebuilt and it looks and runs REALLY good!
alkwj 2 years ago
Its always a good thing to open them old engines up a bit, break some carbon loose. Old AC we have puffed black chunks at idle, opened her up for a bit and now its nice and clean.
MASTERSKITLEZ 2 years ago
hello! i have a buggy similar as you but i have a problem it makes too much noise it as a ski doo engine too a 340cc bombardier year 1976 help me please! it as the original muffler on it
msngros 2 years ago
does it have a silencer, and if it does than repack it
iexploderacoons 2 years ago
Did this come of a sled or something?
dillonbf 2 years ago
you need to get out more
1skiinIan 2 years ago
I take that as a yes. I do kart racing. So it's weird seeing projects like this for me.
dillonbf 2 years ago
@1skiinIan lmao good one
denestud 1 year ago
how much is an enginelike this and where can u get it
urban1skater 2 years ago
dude thats cool last time i did that it red lined but my dad was like woa that thing rips
Austin4weelinking 2 years ago
damn dude that thing is only a little bigger than my briggs 4 horse! hahaha
iexploderacoons 2 years ago
cool dude. I like the way it sounds
fordwillkillyou 2 years ago
I got a 600 engine for my go kart, currently buidling it, it should be quite quick!
JANNOSPR 2 years ago
how do u make 1
Aceflyer4 2 years ago
make what?
1skiinIan 2 years ago
how much do you want for it?
shacodbe 2 years ago
40,000
naw just kidding. Already sold
1skiinIan 2 years ago
I have one of these that I got from Ebay- it's going to replace the Sachs SA2-290 currently on my kart now. (Lowrider v2.0). They're a similar size, but the Sachs was a single carb. I wonder how much difference this will make?....
jerryassburger 2 years ago
you will notice the difference if you sinc the carbs and have them tuned right
1skiinIan 2 years ago
i love how they make such big engines so compact
WC9456 2 years ago
looks like its gonna fly when you get it done. and i love the sound of a ol polaris two stroke. i just wish my dad would let me do/work on a project like that becouse our neighboors have two sleds in there barn just rotting away they said i could just have and there both polaris's but i dont know if they run, but the motors are still there.
wofobo 2 years ago
yeah. 30+ years later and they still have that destinctive exaust note
1skiinIan 3 years ago
to this? "I see. I know certain Craftsman lawn tractors could come with an 18 HP single cylinder 2 stroke engine. (I think Kohler) "
my bad.
i thought you meant the polaris came off a tractor.
kx519 3 years ago
never heard of that. and this ingine is out of a early-mid 70's Polaris snowmobile
1skiinIan 3 years ago
Comment removed
Bobbymitchell10 2 years ago
my apologies asshole.
i live in texas. so polaris = quad.
and you said lawn tractor..
kx519 3 years ago
came off a quad retard..
kx519 3 years ago
2 stroke?
bighead29058 3 years ago
well, yeah
1skiinIan 3 years ago
I ended up selling the motor for 350. I got it for 50 so I couldn't really refuse a 300 dollar profit haha :P
1skiinIan 3 years ago
Don't forget ear protection.
coffeefish 3 years ago
turn down your sound then
1skiinIan 3 years ago
how much did you get it for?
vaca129 3 years ago
50 bucks canadian why?
1skiinIan 3 years ago
If I was going to run a 340 on an on-road go cart what would the best way to keep it cool? Thanks
BC4Lyphe 3 years ago
well, is it fan cooled? if not, don't even bother. even better would be to find a liquid cooled one and mount the radiator above your head behind your seat.
scrole down and read some of the comments about heat.
1skiinIan 3 years ago
That sounds nice!
Was it 2 stroke or 4 stroke?
themaritimeman 3 years ago
2 stroke. a 4 stroke would never smoke like that, unless it had a seriouse problem...
1skiinIan 3 years ago
OK thx. I figured it was because of it's sound and the shape of the exaust pipe, but I have never heard of 2 strokes that big!
themaritimeman 3 years ago
300cc is nothing. the biggest 2 stroke snowmobile I have seen and heard of, is 900cc. yamaha makes 1000cc (1L) but they start going 4 stroke after that
1skiinIan 3 years ago
I see. I know certain Craftsman lawn tractors could come with an 18 HP single cylinder 2 stroke engine. (I think Kohler)
themaritimeman 3 years ago
Bombardier used to make 1000cc twin 2 strokes for the mach z but no longer make then but the biggest one ive heard of is 1300cc in the redline revolt
jfreake13 3 years ago
yeah. bobi stopped making the 1000. it was a bad engine
1skiinIan 3 years ago
not really.
tayb0987 3 years ago
i love how you can take the spark off one cylinder and it still sounds fine...
really reliable.
paulbreor 3 years ago
you were saying it ws meant to be run in cold temps but do you think you could run one without problems in 80-95 degree weather?
vaca129 3 years ago
oh ya, for sure. just don't make it work too hard, like floor it for 2 minutes
1skiinIan 3 years ago
what do you mean? it's a skidoo engine. it's designed to run in wither temps
1skiinIan 3 years ago
i have a 350 on my gocart i bought the thing with a running engine (runs real nice) for $75 the gocart has a full cage on it too i think i got a good deal
drummer1212121212 3 years ago
i had that same engine in my polaris 340 tx
i just gave that engine away
robthercking 3 years ago
not the same. this is a 295 not a 340
1skiinIan 3 years ago
i have that same engine but itis a 340cc do you know where i can find some parts?
SC1337 3 years ago
check your local polaris dealer. mine told me where to buy parts
1skiinIan 3 years ago
how mutch for it??
teamhp 3 years ago
already sold it for 200 bucks, sorry.
1skiinIan 3 years ago
how many power had this type of engine??
marreleo 3 years ago
i don't know. should be around 16-18
1skiinIan 3 years ago
my friend put a 300cc kawasaki motor on his go kart and its sick. nice vid, that motor would make one fast go kart
PlatniumProductions 3 years ago
Sweet She Should Move That Car Pretty Good.
IRideVintage 3 years ago
ya thanks. well, it was going to be... the go kart project is cancelled :( the drive train was going to be the original cvt clutches and chain and sprocket. This engine is now for sale. I had absolutely everything figured out on the to-be go kart too. just don't have the time in college
1skiinIan 3 years ago
That'll make a killer motor on a go kart- most snowmobile motors are pretty small- ive had a few of em- heck my 79 Arctic cat eltigre 500cc motor is about that size. That'll also be a killer drivetrain setup.
dangeroustoys56 4 years ago
ya thanks. well, it was going to be... the go kart project is cancelled :( the drive train was going to be the original cvt clutches and chain and sprocket. This engine is now for sale. I had absolutely everything figured out on the to-be go kart too. just don't have the time in college
1skiinIan 4 years ago
what parts did you replace?
fordwillkillyou 4 years ago
cracked air case, spark plugs, fuel filter, and I added a fuel pump. I've got another engine block like this for free, but it is blown and there is really bad cylinder and piston damage. not even worth rebuilding. Now I have to get my lawn tractor working...efficiently
1skiinIan 4 years ago
1972 lol pretty old but runs good for it's age. as you can see, I cleaned it and replaced some parts...
1skiinIan 4 years ago
nice lol hard to belive that thing is 300cc just by seeing it but it sounds great!
fordwillkillyou 4 years ago
yeah, thanks
1skiinIan 4 years ago
yes when i said hard to belive its 300cc looks and sounds like more! what year is it?
fordwillkillyou 4 years ago