80cc Motorized Schwinn Mountain Bike

[indalcecio]

@bluemountaindrivepae 90 miles would take about 3 hours on one of these bikes. Can you do that without an engine?

[HackerGuitarist]

@bluemountaindrivepae ..well..aint you special...

[langtidsminne]

@bluemountaindrivepae ok

[ogrefacewawa]

where do you buy a kit thing to do this for your bike

[badslabber]

what country is this in ? as where i come from the revenue agents ie (the police) would be on you like flies ,is it still classified as a bicycle :)

[DVMsucks]

@bluemountaindrivepae thankssssssss for the story.

[sixaxis171]

how hard was it to do this?

[DVMsucks]

@sixaxis171 not hard, but i don't recommend building one, they are loud, junky, and rather dangerous. go electric. as see in my other newest video.

[JCxShadow]

@DVMsucks Why its junky? I was just wondering.

I was thinking build it in few weeks.

[mcdanijr]

This is great!  If you live 10 or 20 miles from work save gas and just drive this!

[Yasantatehnik]

обычная китайская "дешка" мотор только 43сс ,,,,,, не надо ля-ля

[DVMsucks]

нет, мой двигатель полный 80cc. Вы не знаете, что вы говорите.

[999966699]

Dude you must go through brake pads quite often with those brakes it seems like you would need to convert to discs at those constant speeds.

[DVMsucks]

not at all, if you know how to ride bikes well and how to adjust wheels and brakes the right way, cantilever brakes will work fine for motorized bikes. Even over long term use.

[999966699]

@DVMsucks Oh okay nice, how fast have you gone on this thing down hill 50+ mph ?

[DVMsucks]

well, the motors have a limit on how fast they will run, so the bike tops out at 35mph or so stock (the only way i ride them), even downhill you are only as fast as the motor. On some hills the bike will go faster if you pull the clutch and dis-connect the motor all together.

[999966699]

@DVMsucks Still very fast on a bike but hey have you ever been stopped by the cops on this thing? also because of the engine would the police give you a hard time about getting this thing licensed?

[Boggle122333]

i hav a 50cc on a red diamond back, there pretty fun

[totalGodable]

Dudes That awesome!!!

[ifyoure555thenim666]

how well does it do uphill?

[ctrlaltdlt01]

dangit I just bought one of these 80cc engines (grubee skyhawk). Didnt realized they were so frickin loud...

Sooooo illegal where I live.

I paid $120 for mine. Anyone wanna buy it off me? I will take a loss for it since it was my mistake. Its still in the box...

[rooooboy]

@ctrlaltdlt01

where do you live?

[ctrlaltdlt01]

@rooooboy

philadelphia

[ShadouSora]

@ctrlaltdlt01 i will take it off your hands if its attatched to a bicycle

and its still for sale

[Sharretts18603]

How would you shift it?

[cjmotorsified]

you dont, its a single speed.

[Reverseflush]

Wo, that's an engine and that's a bicycle. What's an engine doing on a bicycle?

[Reverseflush]

can it do a burnout?

[DVMsucks]

hellz yea!

[alexz1001]

Thats beasty

[ils360]

that is running a little rich lean it out you will go faster if you tune it right

[DVMsucks]

it was brand new, the first tank of gas, you need to run it rich before its broken in. i have built 9 of these bike my friend.

[NehpetsK57]

dont you think the intake is a little restrictive though?

[DVMsucks]

not really, it could be better but that would involve a lot of carb adjustments and it wouldn't help all that much with the power of speed.

[1MartinD28]

yeah stock usually ends up being better money wise, Im curious how much it bogs up hill?

[yamahonkawazuki]

@DVMsucks agreed. ive just completed the breakin on my trek. gotta be gentle if you want em to last, ( after break in, give em hell if you so desire )

[TheHarryDolanshow]

i will race you my schwinn chopper bike with 100cc motor bitchezzz

[danthemanzizzle]

k, but first, i need, nitrous.....

[eduard2805]

it's crazy....80cc on the bike...! with bike brake...lol

[DVMsucks]

fukkk yea!

[marvinlemus19]

hello i have promlen whtin my bike, i am installel but

no stars can you help me how put on

[rowenj]

i just got mine but i dont know how to start it. do i engage the clutch and start peddling? its hard to peddle when the clutch is desengage

[joshmoss108]

if its hard to peddle then the clutch is not tight.

[wellsgreen]

The bike should be easy to pedal with the clutch disengaged. Start off by pumping the primer button a couple of time and then down on the choke. while you are peddling engage the clutch. if it doesn't start , disengage the clutch and peddle some more, then engage the clutch againe.

[AmericansSexualPreds]

retard

[x0W3N156]

ya it really goes that fast

[keatonzavis]

i mean does it really go 35 to 40

[keatonzavis]

how fast does that thing go

[buzzafire12]

umm i done that just took the stuff of a mini bike lol

[ThaHeartOfLife2]

GRA. the only problems i would say with my motorized bike is the chain always seeming to get looser, so i gotta keep tightening the chain idler, and going over bumps. i find myself always slowing down before going over bumps, because the bike i put the motor on doesnt have any shocks or anything. a straight frame like yours.

[thejoshfilms]

there is a thing you can buy that is made for one speed bikes, its a spring loaded tensioner. you can bolt it right to the one that came with the kit.

[modslayer]

Im getting one soon and im only weigh 110Lbs. Im gonna fly on this thing!

[thejoshfilms]

the main thing for speed is you need a bike with very true wheels, if they are just a little off the bike will go a lot slower.

[gumpdy]

Can you tell me how well this tackles hills? I want to do 40mph but don't want to have that high a gearing and not be able to get up hills.

[ThaHeartOfLife2]

well i can tell you. i have the same motor as him. its best to get a mountain bike with at least 21 speeds since you can peddle with it. It climbs up hills not bad actually, IF you help a little with peddling. even if you dont, it goes up pretty swell... and im on the heavier side of about 200...

[2stroke4life666]

it goes up good but helps alot if you pedle at the same time.

[dilhoule]

sry, my mistake

[dilhoule]

its really 49,5cc

[DVMsucks]

no dude, this bike and all the others i have made have an 80cc 3.5 hp motor in them. they have different size ones like 49, 60, and 70, but i get the 80cc kit.

[guavagrape]

nope, no kits are truly 80cc. your supplier was embellishing.

[DVMsucks]

i think you just said two different things at once... but all i know is the bikes i have been building run with 80cc 2 stroke motors.

[RidingOnChrome]

is there a way to put the motor on the back upper side or something, not in the middle? is there a kit for that? the bikes I have don't have enough room in the middle..

[ThaHeartOfLife2]

hey man nice bike. I really want to put a motor on my schwinn mountain bike, but I am very mechanically stumped. Would you recommend buying a motor kit from ebay or something with schematics on how to install them, and if so, how much would a motor be, like a 80cc?

[DVMsucks]

i make them all the time to sell, and i get them off ebay every time. its always around $175 usd shipping and all.

[ThaHeartOfLife2]

ok, so to get the kind you have on your bike, around 175 or so? If that is so, what is your ebay site? I am very interested in purchasing a kit.

[DVMsucks]

i don't sell the kits or anything on ebay. i buy them from someone on ebay and i make the bikes.

[kaskatron]

smoking,smoke

[diggyj]

Hey, I got one of those engines from "Live fast motors" on eBay and there great but there illegal for me because i'm 14 years old but still fun. What i'm trying to get at is that I had the same trouble with taking out the slack with my chain, but my dad showed me that you can take out one more link and it might be a tight fit but the chain will break in it self.I hope that helps so you don't have to use that chain tensioner so heavily

[DVMsucks]

dude, i gota tell you i have been working on fixing making and toying with all kinds of bikes for a good 10 years now. i have made 4 motorized bikes as well.i needed to ues the tensioner cus the bikes got no room top or bottom. i know whats up. but thanks anyways!

[diggyj]

O ok never mind then.

[Shadowslamer]

Where did you get the kit?

[helljumper01]

look up "kings motor bikes". that is where i bought mine.

[Shadowslamer]

What kind of oil are you useing in that bike?

[DVMsucks]

its running in the video on a mix of 16:1 with normal 2 stroke oil because it was new at that point. thats why it was smocking so much. it now runs on a 20:1 and you can't see any smock. (faster too!)