Luc59457: 36v 1000w Currie E-bike Video PT.2 Evolution

[bdub232]

luc59457 WTF you asshole. He just asked a simple question and you jump down his throat because something F'ing Youtube or Google did? You are the biggest crybaby D-Bag on the internet.

[luc59457]

@bdub232 No, I actually am someone to speak out, not a lazy fuck like yourself. Now go play your video games. Nice channel btw, lmao

[luc59457]

@bdub232 I've helped a lot of people on here, how many have you helped? Lets see. 200k total views compared to over 2 million.. Pretty sure I helped far more people for my time on here. Asumming D-bag, If you were affiliated with youtube (revenue sharing) and you knew what they shared with you would raise a little hell as well, unless you are a pussy, which I expect you are.

[luc59457]

@bdub232 Not something they did, something they are doing all the time. Get educated.

[luc59457]

@bdub232 And it's not just one thing

[luc59457]

@bdub232 Funny how your comment had 2 thumbs up, then I rated it down once, and their should have still been 1 thumbs up don't ya think? It was at 2 thumbs up before I rated it down. I don't send anyone here to rate your comments. But I've had partners send people here to bomb mine, not only my ratings, my videos as well. So maybe you should think about why I am an asshole to certain commenters here. I agree with you. I am an asshole. To the right people.

[luc59457]

@bdub232 If you actually look through my videos you will get a sense that I don't trust the Google/youtube system in general, and you shouldn't either.I have lots of reason not to trust them with the varying laws of different jurisdictions, it's a mess. Maybe you need to look into corporate laws of Nevada and Delaware.Many fortune 500 companies are attracted to those areas because of tax differences and judicial laws that give them immunity and benefit above other states laws.Corrupted

[chilidress]

@luc59457 where can i find a crankset like yours?what's the model?

[luc59457]

@chilidress Once Youtube/google staff stops featuring Garbage and acts like an actual company is when I will help you. Till then you are on your own. In the meanwhile, you can try pushing them to speed up the change. I am too disgusted by what youtube has done so far to even want to have a serious conversation with anyone. All I feel like doing on here now is telling everyone to go fuck themselves. If i had the chance to tell the staff face to face, I would. I have so much hatred for them

[luc59457]

They can pay me all them want. Money doesn't talk. Not in my books. Logistics talks.

[doubletriplerainbow]

wooooow cool bike, my friend has the Busettii Big 50 Mile bike and it seems to fly like this one. Wonder what kind of mileage per battery charge this can get. I know that my friends Busettii runs about 50 miles on a charge.........Where can I buy this one ?? ciao

[luc59457]

@doubletriplerainbow It gets a bit over 30kms at 30km/h new batteries, no pedalling, flat, light winds. You cannot by this completed, you must buy the parts and assemble or pay someone to do it. The motor at its lowest price is discontinued at the main outlet, I am still bugging them to bring this excellent motor back

[459am]

Buy a 66cc two stroke motor kit instead. Believe me, Way better at 135 bucks instead of 1000s of dollars, plus lighter. Im selling all of my electric crap ASAP.

[luc59457]

@459am I'm not. And no it's not thousands, you can actually build the whole thing for under 1000$... The currie motor I use only costed 109$ so even cheaper than your 135 buck 66cc, and I can push up to 4.8hp at peak out of this motor, a 66cc is no comparison.

[way2easy2love]

@459am IM SO SICK OF YOU CHAIN POSTING ON ALL THESE E BIKE VIDEOS DUMBASS

[Sonofamitch69]

@459am Where could I find said motor kit?

[luc59457]

@Sonofamitch69 I'm not helping any more people, until Youtube and Google provides me more. This world is about money, and I want it!

[Sonofamitch69]

@luc59457 I was actually talking about the gas motor.

[Sonofamitch69]

@luc59457 And yes money is good. I love monies as well lol xP

[Mickyski]

Nigga fuck you

[luc59457]

@Mickyski Just die faggot, you'll be doing the world a favor

[jonnyasprin]

Awesome job man,nice innovation with the power transfer,peace out...

[Martins2012]

I always thought about this system as for you can still play with the gears while on the power.

[luc59457]

@luc59457 You-Tube just fixed This @whatthebuckshow, use to show as a link - as though I was responding to his comment when it never was made. Everything is recorded here.

[TABAGfrancis]

Please watch:

THE WORLD'S SIMPLEST TRANSMISSION for BICYCLE

[panoulis20]

@luc59457 you just have to add a circuit to allow power towards the batteries or to allow power from the batteries to the motor, and to find a way to have a stable current towards the batteries nomater how fast the chain rotates the generator so that you dont damages them,its actually a hybrid bike rather than a electical one, dont you see?its simple considering you have the 90%, it would give extra travel distance, you take some of the energy back,

[luc59457]

@panoulis20 I could just keep everything the same and add a proper rated dynamo, connected to the rear or front wheel somehow, this would come up to about the same and I would still have use of all my gears. I still would not do it because I do not find it worthy. I would rather use solar panels than that.

[luc59457]

@panoulis20 I think it's a good idea if you have just 1 gear. I can see how you will get some energy back, but we are talking very small amounts. It takes under 1 minute to decelerate to a stop. It takes under a minute to go down most hills. So every time, you will get under 1 minute of energy returned. Every time, this will give you even less extra run time than that 30 seconds for example, it took you to go down that hill.

[panoulis20]

@luc59457 what i am saying is,,weld the rear sprockets with the rear wheel in the bike you have,so that the chain is moving at all times with the wheel, that means that the electric motor will be rotating constantly weather you are using it or not, when youll be in a downhill it will work as a generator reacharging the batteries but when youll need some power it will switch from generating to creating force, i am saying thats its something easy to do with your setup and will give more distance

[luc59457]

@panoulis20 First, I will not have use (with the motor) all the gears I have available right now which is 8. To get 2 or more, I will need to Rig a shifter somewhere and have proper clearances and that might not be so easy. Also, When the motor is not running, I will be slowing down faster than normal, so less distance on that end. In the end, it will balance out to not much more and less benefit of gears to change which gives me both speed and torque options. I get what you're saying.

[luc59457]

@sxephil Are you there?

[luc59457]

@youtube LMAO your system is stupid.

[luc59457]

@desertphile, LMAO

[luc59457]

@learnitliveitordie hey

[luc59457]

@bob hi

[luc59457]

@panoulis20 This idea has been around for years. I simply came out with this version about 2 years ago, to be adapted with motors that have a No.25 sprocket.

[freeworldofskiing]

wow your voice is annoying.

[ludiagsm]

nice video 10x 5 stars from me :)

[runisle]

C'est tout simplement GENIAL ! Franchement, bravo. Je vais l'essayer sur mon VTT.

[fmack68]

ok i cant weld or dont have the skill to do this where can i buy one and just put it on my bike.

[darkphotn]

Just spend $500 on a Currie Trailz.

[tunckuyel]

where can we buy this part?

[devja71]

ha! you took the idea right outta my head. good, now i don't gotta develop it. good luck on this i hope it works good cause i need it

[finalwave29]

Is there certain geometry involved with space from motor to sprocket and those parts explained

about the sprocket with the cup holder and the free bearing where do you get them and material/what there called.What are these parts meant to do normally to increase power.

[Ho2seven]

how would i go about getting that same pedal and gear setup that you have? i gotta find out how you did that! awesome work. I believe that luc59457 has the same set up but he didnt explain to much in depth about it. If you can tell me what to buy and where to buy it that would be awesome. thanks a lot. i understand the concept of it but i dont quite know how everything was put together.

[luc59457]

Look through my videos, it is explained in depth. I may have to place another video up soon for the present project since, for some frames (like the one I'm presently working on), oposite sprocket mounting is required for clearance from the frame.

[dfhohj]

Why did the wheel stop turning when you stop peddling?

Do the motors create resistance ?

[luc59457]

It's because the wheel was rubbing on the ground when turning the pedal. No motor on this video. Click my channel name to see the rest of the videos.

[Nevawake]

Excellent work by the way anyway. Uve got a good head on ya shoulders.

[Nevawake]

just watch out bloke coz if that bearing fuks up so will your leg! the pedal will fly total lock. maybe better to use rear cogs instwead.

[Nevawake]

how many dexamphetamine do u take a day to concentrate?