@MrNelspot007 Bend sensor types don't normally need to be primed, because a ball will 9/10 times roll down the feedneck, causing the prop to spin, loading more. I know this because I own a pinokio, and my friend owns a VMax.
@banananananaify you turn a hopper on. it turns the prop/rotator a bit to load balls into the chamber. when you run out of paint (with mic-activated hoppers) it doesn't just turn 24/7 like the rotor. It spins when it hears the noise. so you pour the paint in and the sound it makes causes the prop to spin and load the new balls into the feedneck/chamber.
@banananananaify To "prime" a loader simply means to make the prop spin to load paintballs into the feedneck. Priming only needs to be done w/ sound activated and bend-sensor type loaders upon start-up. This prevents starting a game without paintballs in the marker's breach, thus causing the marker will not fire... not a good thing to pull the trigger and nothing comes out at a critical moment. Most loaders these days have corrected having to prime them because they spin on start-up.
@staggerlax27 Not really no, but they will all break in due time. I just got these with my new pack so I hope to see a difference from my ANS pods I got for free.
i just bought an invert mini with a 70/45 ninja tank. i still only have a gravity fed hopper cause i didn't know what kind of hopper best suits the mini...any advice?
@Yarrghman if u wonna keep ur gun light go for the rotor,or the vlocity if u cant spend too much money for the hopper.if u dnt care go for a halo.i got a halo b v35 with rip drive its kinda heavy but not heavy enough to complain about.so its up to u....theres many othr hoppers out there.do research them buy 1.
cant wait for a review on this....... this looks pretty goood. 30 bps, under 1 lb, cheaper than a rotor, internals look like a pinokio, cool desighn and cant forget the pop open packaging
I really have no clue why you kids that have never used this hopper are complaining about it. Some of you are talking about having to shake it when every single time I get down to the last few balls in my rotor I have to shake it. And the fact that there are jamming issues with the rotor. We had three hoppers go down in our last tournament and my entire team has v3 rotors. Honestly the pinokio feeds wayyyy better than a rotor but it's just too bulky. So why not take a little of the technology
I liked how you tried to hide the fact that you had to prime it again by distracting everyone with the Proto pod then when you closed the lid you hit the button with your thumb. :)
i have a bt delta elite right now and im selling it. and i want to get a empire axe is that a good choice? and i need a good electric hopper under $100 any good suggestions?
great review, allthough i'm feeling that this loader will end in a big lawsuit lol also you forgot to mention its max ROF on that geo, but otherwise great video lol im glad i discovered your videos
i'd think i would stick with the rotor. it seems like it is sound activated, but yet cant finish off a full hopper without having to shake and bake it.
not to be a hater on the v-maxbut i think id rather spend my money on a pinokio i dont notice all the little things like the profile and the pinokio i know it works very nice and its simple
They should be ashamed... you copy the rotor, its packaging, even the manual, and yet you still manage to fuck up. Haha what a joke, be original or at least add on to the design don't butcher it.
mike please respond what size tank do you use on your geo 2, i can tell it's bigger than a 68 ci, also how many more pods do you get off of what ever tank you use. please answer back
@mrDxPhd you sure because i sure dont feel any kick with my etek2. all i get is barrel rise. but, compared to an a5, the a5 has kick and barely any barrel rise.
@soccerguy2433 thats what i was trying to explain to mrdxphd that tourny markers dont have kick..they have barrel rise. the a5 has kick because it uses a heavy hammer unlike most tourny markers. so you feel that heavy hammer everytime it moves forwards and backwards. i play with mislim markers and yes i do have an etek2. so, i would know what a "kick" would feel like and a tourny marker does not have kick.
hey mike, how fast does this actually feed? right now i have a halo with the upgraed board, but its getting old and the feed neck brok and it fell a good 4-5 feet to the ground, and hasnt worked since lol, will this feed close to the halo? max i fire is 35bps if im full auto or 500% ramping, which is rare, but i want it to feed for those times i have to spatter the windscreen of a tank quick lol
looks like a kingman rapid loder
ColeZonVacation 18 minutes ago
does anyone know if mike will ever sell a pinokio on markerbids
tot810 1 month ago
Wouldnt u think his nabours woukd b pist tht hes practicly painting their trees
bigballs5541 1 month ago
@MrNelspot007 Bend sensor types don't normally need to be primed, because a ball will 9/10 times roll down the feedneck, causing the prop to spin, loading more. I know this because I own a pinokio, and my friend owns a VMax.
MrXgiftx 1 month ago
I have the new Proto Pods too and they are wonderful because they open easy and don't look crappy at all
CokeCIassic 2 months ago in playlist More videos from paintballtechpb
Flick over to my channel to get a free guide to all 2012`s paintball guns =) Yay for you =)
thepaintballguns 3 months ago
When they r gonna have a speed feed
Mattekken101 3 months ago
@Mattekken101 ansgear has some
Joehockey1990 1 month ago
That looks really different in a good way on the Geo....
JerryLawsMartin 3 months ago
@TheBigtony115 it's a geo 2
megadavee1 3 months ago
What gun??
TheBigtony115 4 months ago
so do you think yopu can do the 50 cal mod like you did on the pinokio
aarondawesum 4 months ago
ok so wats better this the rotor or pinokio
SANTOSSSXDCKXX 5 months ago
Looks like rotor slot actually
Rudolfusgaming 5 months ago
love my pinokio nothing gets better
Tht1guy63 5 months ago
Can you please do a video on the AMP paintball marker? Please?
MDGreenPaintballs 5 months ago
wait... prime it???
banananananaify 5 months ago
@banananananaify you turn a hopper on. it turns the prop/rotator a bit to load balls into the chamber. when you run out of paint (with mic-activated hoppers) it doesn't just turn 24/7 like the rotor. It spins when it hears the noise. so you pour the paint in and the sound it makes causes the prop to spin and load the new balls into the feedneck/chamber.
GrandRiffAuto73 5 months ago
@GrandRiffAuto73 oh i get what you mean, i used to have a empire reloader b
banananananaify 5 months ago
@banananananaify yeah. i prefer them like that. Empire makes good stuff. I saw the rotor and heard it do that. immediately never getting one lol.
GrandRiffAuto73 5 months ago
@banananananaify To "prime" a loader simply means to make the prop spin to load paintballs into the feedneck. Priming only needs to be done w/ sound activated and bend-sensor type loaders upon start-up. This prevents starting a game without paintballs in the marker's breach, thus causing the marker will not fire... not a good thing to pull the trigger and nothing comes out at a critical moment. Most loaders these days have corrected having to prime them because they spin on start-up.
MrNelspot007 4 months ago
Rotor/Pinokio Hybrid? Lawsuit anyone?
PaintYourFriends 5 months ago
dont worry guys this does not look like the dye rotor or has the same box. lmfao
iusedazzle 5 months ago
How can u afford all these guns like where do u buy them from?
psncodegiver21 5 months ago
whens the reveiw comeing?
loly2775 6 months ago
ENOUGH WITH THE ONE DAY COMMERCIALS!!!!!!!!!!!!!!!
xSilent20x 6 months ago
Does it matter wat pod u have
staggerlax27 6 months ago
@staggerlax27 Not really no, but they will all break in due time. I just got these with my new pack so I hope to see a difference from my ANS pods I got for free.
MaxBemisingod 6 months ago
I love valken, just got the tango vest ACU camo its amazing, I want this hopper or the rotor next.. RIP BORG, ONE MAN ARMY
TylerTheT 6 months ago
r.i.p borg u will be missed :'(
mexcanterrorist 6 months ago
So this is what happens when the pinokio and the rotor have a child.
MJBfromCCC 6 months ago
Where can i get that red exalt feed?
Matix109 6 months ago
@Matix109 ANSgear.com
650SURPRIZE 6 months ago
Comment removed
qwert123mt 6 months ago
whats better Halo b or this for an Azodin Blitz 2011?
legoretards 6 months ago
@legoretards They are both good choices, but halo is cheaper.
Sageisstupid 6 months ago
Get an Invert Too
Uzumaki569 6 months ago
@Uzumaki569 lulz
gh5432 6 months ago
@Uzumaki569 get a rotor
stoneadam10 6 months ago
i just bought an invert mini with a 70/45 ninja tank. i still only have a gravity fed hopper cause i didn't know what kind of hopper best suits the mini...any advice?
Yarrghman 6 months ago
@Yarrghman if u wonna keep ur gun light go for the rotor,or the vlocity if u cant spend too much money for the hopper.if u dnt care go for a halo.i got a halo b v35 with rip drive its kinda heavy but not heavy enough to complain about.so its up to u....theres many othr hoppers out there.do research them buy 1.
pure2089 6 months ago
@Yarrghman id say prodigy or invert too but its ur choice bro
evilchubchub 6 months ago
um what are u shooting at?
nosetackle4 6 months ago
@nosetackle4 its an empty space with trees
here2there4life 6 months ago
cant wait for a review on this....... this looks pretty goood. 30 bps, under 1 lb, cheaper than a rotor, internals look like a pinokio, cool desighn and cant forget the pop open packaging
qwert123mt 6 months ago 15
Wiegh the Mokal Aura Please? In the next video just do it for me randomly. Thinking bout buying it.
Ehverything 6 months ago
When two love each other very much the decide to make a baby
thebradms 6 months ago
from two of the best loaders on the market, combine them, and then add some of your own unique technology. In my opinion Valken did what was smart.
thecure1221 6 months ago
I really have no clue why you kids that have never used this hopper are complaining about it. Some of you are talking about having to shake it when every single time I get down to the last few balls in my rotor I have to shake it. And the fact that there are jamming issues with the rotor. We had three hoppers go down in our last tournament and my entire team has v3 rotors. Honestly the pinokio feeds wayyyy better than a rotor but it's just too bulky. So why not take a little of the technology
thecure1221 6 months ago
ehh i dont like it
ThePBprodigy 6 months ago
Prophecy wins over every thing even the rotor
midwestchaos1 6 months ago
why are companies still making hoppers?? the rotor won a few years ago i mean really.
PbEvilStump 6 months ago
@PbEvilStump Diversity > Monopoly
chevyboy47 6 months ago
@chevyboy47 very true
PbEvilStump 6 months ago
What is mikes email
RiseWithBlade 6 months ago
Check out my pb vids, high quality reviews, shooting vids, playing vids
01pbreviews 6 months ago
Nice video, I notice your a fan of virtue boards, but what about Ape Rampage boards. I have an etek 3 and I'm wondering if it worth the ugraded.
wdwarf11 6 months ago
Rotor wins.
Xavier070 6 months ago
ROTIO!!!
tim22100 6 months ago
I liked how you tried to hide the fact that you had to prime it again by distracting everyone with the Proto pod then when you closed the lid you hit the button with your thumb. :)
errakus 6 months ago
@errakus I like my Pinokio though
errakus 6 months ago
Hey Mike do you use the waterproof case with your headcam?
PBLsnake 6 months ago
oh yeah that will be my next loader!!
stallohas 6 months ago
i have a bt delta elite right now and im selling it. and i want to get a empire axe is that a good choice? and i need a good electric hopper under $100 any good suggestions?
iGetzHD 6 months ago
@iGetzHD
yes the empire axe is an exelent gun, shoots very smooth. a hoper under $100 i woul definetly check out the invert halo 2.
MrThepballer 6 months ago
@iGetzHD invert halo 2 all the way! reliable, strong, and quick, and silent!! :D
89KxRider 6 months ago
Why did you switch from RPS premium to Evil?
- I know its better paint traditionally just a straight question.
dac152 6 months ago
@dac152 Premium is just for the shows he uses evil for tournaments.
RyanSchuppert 6 months ago
ROF on the Geo was 13bps, goldwaved
crazylittle 6 months ago 4
knock off of the rotor
987koolkid 6 months ago
was the GEO2.1 on ramp?
fire rate/feedrate seem inconsistent.
s4mini 6 months ago
@s4mini it was un uncapped, which means as fast as the Vmax feeds. It isn't very consistent.
paintcheckPB 6 months ago
@paintcheckPB Thats takes my vote away from it then... Consistency is King!
s4mini 6 months ago
@s4mini I'm not saying it wasn't semi though, but I still am not convinced on this loader until I try it in an xball game.
paintcheckPB 6 months ago
@paintcheckPB I heard the uncapped in the vid, but I wasn't sure about mode. I've not seen Mike use semi on an electro very often!
s4mini 6 months ago
This has been flagged as spam show
Hey check out my unboxing videos and shooting videos on my channel!!! subscribe and WIN IN GIVEAWAYS!
KingTailPB 6 months ago
nothing is on sale on markerbids hahah
soccerguy2433 6 months ago
What happened to the days when a product was shit mike said it was shit.
predator1117 6 months ago
@predator1117 maybe mike sold out?
soccerguy2433 6 months ago
Why would there be a lawsuit?
calidrifter 6 months ago
Just one question. What the hell is priming?
MrXgiftx 6 months ago
@MrXgiftx putting a paint through the feedneck into the gun before you actually shoot
MajorOPayne 6 months ago
Mike I have a russian legion / a Timmy could you tell me something about it in general that would be awsome
matt1kayden2 6 months ago
great review, allthough i'm feeling that this loader will end in a big lawsuit lol also you forgot to mention its max ROF on that geo, but otherwise great video lol im glad i discovered your videos
matt111995 6 months ago
@matt111995 how would it end up in a big lawsuit
gradykid169 6 months ago
@matt111995 why? if it has its own patent. its fine
BravoSquadPB 6 months ago
As chinese star you mean a shuriken right? :)
GuaLCoRtv 6 months ago
@paintballtechpb do you shoot with your middle and ring finger
skatahboi93 6 months ago
lawsuit in 5... 4... 3...
TBrownPB 6 months ago 35
if u paint a a5 with just spray paint without taking it apart will it stay on and will it screw up the shooting
patkid24 6 months ago
i'd think i would stick with the rotor. it seems like it is sound activated, but yet cant finish off a full hopper without having to shake and bake it.
azntactical 6 months ago
It looks like the lid sux. I hope they make a speed feed because it looks really hard to open!
0YoungGunz0 6 months ago
this is what happends when a lazy compagnie dosent know how to create a hopper they rip off the best compagnies
3zek1ll 6 months ago
@3zek1ll This is what happens when 12-year-olds try to spell...
ICBM07006 6 months ago
@3zek1ll from france suceur de bite ;)
3zek1ll 6 months ago
not to be a hater on the v-maxbut i think id rather spend my money on a pinokio i dont notice all the little things like the profile and the pinokio i know it works very nice and its simple
Trezzyize 6 months ago
Wow the pinokio and rotor should use rubbers! look what happend!
mrpaintballfreak11 6 months ago
If only this fit into the infinity sexier rotor shell...
baconator490 6 months ago
As usual, so many trolls. Dont judge on it unless you have used it extensively.
It seems to have potential, cant wait for the review.
U7VK7VOVV7V 6 months ago
hands down just get a rotor all these other hoppers are schwag dye does it best go with whats good. haha fuck both of those hoppers so whack
everydaybradda88 6 months ago
This has been flagged as spam show
The new Valken Rokio! Get your's today!
smacky2 6 months ago
They should be ashamed... you copy the rotor, its packaging, even the manual, and yet you still manage to fuck up. Haha what a joke, be original or at least add on to the design don't butcher it.
omon91 6 months ago
how would a speed feed work on that, if you could put an exalt or something on it, i bet it would be great, the lid seems to be a problem
aadrossart 6 months ago
mike please respond what size tank do you use on your geo 2, i can tell it's bigger than a 68 ci, also how many more pods do you get off of what ever tank you use. please answer back
blazeofglory628 6 months ago
@blazeofglory628 i think its his 90 or 110/4500 ninja
Panozzo19 6 months ago
@blazeofglory628 He'l answer you faster if you ask him in the techpb forums
Bcompanypaintball 6 months ago
ehhhh
:/
DAYBREAKPAINTBALL1 6 months ago
just waiting for the speedfeed, thanks for the review, I cant wait to grab one when i come back to the states.
supacruiser 6 months ago
Love those pods.. Fits a bit more and the mouth isn't as tough to open. Sadly all 12 of mines were stolen
shortdan5 6 months ago
Do a review on the zodiac.
MrPlazmaz 6 months ago
how is the size and weight compared to the rotor?
kevinnguyen2011 6 months ago
would this be good with an Azodin Blitz 2011?
legoretards 6 months ago
how's the kick on the geo? seems loud and kicky
mrDxPhd 6 months ago
@mrDxPhd kick as in recoil? tourny markers dont have kick. they only have barrel rise. if you want a decent kick, play with a stock a5.
azntactical 6 months ago
@azntactical yes recoil. lol. tourny markers do have kick/recoil. we're not shooting marshmallows at 1 psi.
mrDxPhd 6 months ago
@mrDxPhd you sure because i sure dont feel any kick with my etek2. all i get is barrel rise. but, compared to an a5, the a5 has kick and barely any barrel rise.
azntactical 6 months ago
@azntactical cause the a5 is heavy (counter acting rise) and the etek is light.
soccerguy2433 6 months ago
@soccerguy2433 thats what i was trying to explain to mrdxphd that tourny markers dont have kick..they have barrel rise. the a5 has kick because it uses a heavy hammer unlike most tourny markers. so you feel that heavy hammer everytime it moves forwards and backwards. i play with mislim markers and yes i do have an etek2. so, i would know what a "kick" would feel like and a tourny marker does not have kick.
azntactical 6 months ago
Looks like a rotor
wrestlemaniac202 6 months ago
nice...I think I may just pick this up after mike's video review....
506guballer 6 months ago
mokal aura vid soon? kind of excited to find out if it is good or bad.
fortke66 6 months ago
@fortke66 he already has one
alexr895 6 months ago
@alexr895 he has an unboxing video but im looking forward to the review.
fortke66 6 months ago
does it only have one speed? or is it programable?
ejwall 6 months ago
can you do a jrny review since they are being sold now?
jeffy123123123 6 months ago
the valken rotor!1
acuellar4444 6 months ago
Looks like a freaking Eggy 4 haha
pwnagenick505 6 months ago
REBALL TEST NAOW! thumbs up :D
ojoj626 6 months ago
Hey Mick i was wondering if that hopper was good hopper for a descent player like me.
i only started a 1year and a half ago
so please answer me back thank you
321minecraftfreak 6 months ago
would u prefer the prophecy or the vmax??
PaintBallKid0563 6 months ago
Valken loaders are junk. I watched so many of them shit out at the last GPL event. Even saw one guys jam up during the match point in the finals
kennedy8807 6 months ago
i love your bids and i dont get to play paintball till spetember and i use your vids as my temprarey fix =)
butterywheel 6 months ago
if i have a rotor and pinokio, do i already have a v-max?
trollface.jpg
Metal1091FU 6 months ago 39
Do a review on the 2011 alien independence
ChiPaintballr 6 months ago
hey mike, how fast does this actually feed? right now i have a halo with the upgraed board, but its getting old and the feed neck brok and it fell a good 4-5 feet to the ground, and hasnt worked since lol, will this feed close to the halo? max i fire is 35bps if im full auto or 500% ramping, which is rare, but i want it to feed for those times i have to spatter the windscreen of a tank quick lol
jraftb 6 months ago
It like a pinokio and rotos together
mjmt100 6 months ago
Still lovin the Pinokio!
Matix109 6 months ago
i dont like it that much :s
jizzems79 6 months ago
yay another loader that needs its own special speedfeed!!!
TheGoldenGreek1 6 months ago
hey mike, where is your mask?!?!? 1st rule of paintball saftey.
canadianhelltroopers 6 months ago
@canadianhelltroopers go suck it. DOnt tell him what to do. queer
MatrixPaintball 6 months ago
I like how one of the top rated comments is about his dick... great top comment for a paintball video..
MatrixPaintball 6 months ago
do you know if it's coming out or is it dead in the water
TheMusson1979 6 months ago
mike do you have any info on the angel eye's mask ?
TheMusson1979 6 months ago 2
What was the read out on the Geo?
madpaintballer33 6 months ago
dont tell me that was semi =O
Cal1p3ngu1n 6 months ago
any issues with the "chinese star" piercing paintballs on the way by ??
brettline07 6 months ago
a chinese star,,,mabey a ninja star mike... just helping out
ihazPB 6 months ago
hey mike when is the mokal aura review and shooting going to be up?? im very excited lol
bryanozzy2215 6 months ago
@bryanozzy2215 I think he did it already ...
kparker798 6 months ago
i dont understand? are they gonna have a speedfeed for this?
pbteamswift24 6 months ago
@pbteamswift24 pparently in another week and a half virtue will put one out said by ansgear
GamingReel 6 months ago
at least its not as ugly as the pinokio
fatyburger 6 months ago
yea the rotor and pinokio fucked
gearsofspartan 6 months ago 53
@gearsofspartan lol velocity for the win !!!!
sk8tagpb 6 months ago
@gearsofspartan Ya but this thing feeds slower and its not water proof XD
therealpbreviews 6 months ago
305:)
pbteamswift24 6 months ago
looks like a croos between the rotor and pinokio !!!
J4K3F13LD5 6 months ago
I would prefer this loader than the rotor because of the price, speed, and durability.
Rotor= $190
Vmax= $120
KrislovesPB 6 months ago
mmmm...ROTOR FTW
ernesin149 6 months ago
Hey Mike Whick Should I Get Pinokio Or VMax
PaintBoard1 6 months ago
why is everyone so taken in by this loader? its already been made... better... its called a rotor.
Draker73 6 months ago
@Draker73 yeah for the small price of $200... This is 80 dollars less has better batterie life and jams less.
RyanSchuppert 6 months ago
That loader material seem a little bit cheap. The plastic not as well made like rotor.
anhmaster 6 months ago
Pinokio and rotor had a baby...
Sageisstupid 6 months ago 2
have you ever accidently shot the door or door frame
swordandsnipe 6 months ago 2
and mabey a versa shell lid.
PbMac93 6 months ago
whats wrong with the old proto pods i used them for over a year with no problems and you can get them for a dollar at world cup
krispy022 6 months ago
Wannabe rotor.....
OSMxLOBBIES 6 months ago
id like to see a popcorn test
liamconnolly33 6 months ago 2
i might get one i mean they look like the best of pinokio and rotor im going to wait for a more indef review
krispy022 6 months ago
This has been flagged as spam show
that looks really ugly to me
marinenick100 6 months ago
Until they get a SPINE feedgate for this thing I'm using my rotor.
sopp44 6 months ago
Imagine if someone was just walking out in that woods area, they'd be like WTF?!
BwsHD 6 months ago
make more woodball vidoes
Baconstealer303 6 months ago 2