sup buddy, just got a 2008 vento triron li- just ripped out all the evap crap and exhaust extras off..what did u do in that situation? i had several lines to plug, and mine came stock with an expansion pipe, what you recommend for first upgrade, im thinking i might stay away from the bigbore kits- reliable transport is my goal, with some umph
hey. did your scooter start out as a four stroke? or is that engine a four stroke as well? because i have a vento triton (2007 li) thats a four stroke and i was wondering if i could put a bore kit in it and have it work.
This one started out a 2 stroke, and still is a 2 stroke. Tritons didn't come with 4 strokes until the last couple of years. You can still get big bore kits for 4 strokes. I'm guessing it's a 50cc GY6 (139QMB) in yours, but I really never paid attention to the 4s.
parts for scooters dotcom has 90cc MInarelli engines that bolts straight in.
Couple that with a Hoca High Performance PWK Carburetor for 50cc 2-stroke 1PE40QMB Minarelli Jog engines in 24mm and it will absolutely fly. see my videos of a Genuine Buddy with a Rattler engine (same engine) 72mph.
@X7rocks parts for scooters dot come has 90cc Minarelli engines, it's a straight swap. I have done it and you should get 65-70mph with a 21mm Delorto with 90 main jet, Leo Vince exhaust. See my videos. The Buddy 110 has a PGO/Genuine Rattler 100c engine with prima exhaust and 21mm Arreche carb (fits the PGO manifold) that does 73mph, with massive acceleration
Well, you would probably want to install the leo vince pipe intended for 50-70cc scoots and not the one for 100cc scoots like mine. I'm not sure how much faster you'll go exactly, but most people get at least a few MPH from a good pipe.
sup buddy, just got a 2008 vento triron li- just ripped out all the evap crap and exhaust extras off..what did u do in that situation? i had several lines to plug, and mine came stock with an expansion pipe, what you recommend for first upgrade, im thinking i might stay away from the bigbore kits- reliable transport is my goal, with some umph
stevecameron85 1 week ago
yeah!
linuhlinuh 1 year ago
sounds sweet !! Love 2 strokes .....
GPMAX01 1 year ago
ive ben finding this motor in stock lately.and have ben thinking of building one up...is it worth it? what is your topend GT?
X7rocks 2 years ago
@X7rocks 65 is the fastest I went. They have more potential though.
90gtvert 1 year ago
hey. did your scooter start out as a four stroke? or is that engine a four stroke as well? because i have a vento triton (2007 li) thats a four stroke and i was wondering if i could put a bore kit in it and have it work.
thanks.
crlefley 2 years ago
This one started out a 2 stroke, and still is a 2 stroke. Tritons didn't come with 4 strokes until the last couple of years. You can still get big bore kits for 4 strokes. I'm guessing it's a 50cc GY6 (139QMB) in yours, but I really never paid attention to the 4s.
90gtvert 2 years ago
where can i find a 100cc two stroke engine? i wanna switch my zumas 50 engine
X7rocks 2 years ago
Not sure. They' aren't very common. I just got lucky and found an 89cc scoot and big bored it.
90gtvert 2 years ago
damn,it seems like that has alote of lowend power i could use that my scoot does around 52 mph but..ehhh
X7rocks 2 years ago
I've been 65MPH on this one and I'm 280lbs.
90gtvert 2 years ago
@90gtvert I've learned more since then. I've got details about 90cc swaps and builds on my site (see vid for address).
90gtvert 1 year ago
@X7rocks Zumas are called BW in Mexico and are available with a 100cc engine, it bolts straight into the 50 frame.
Try CL Mexico City or ebay from Mexico
Scootertuner1000 2 years ago
parts for scooters dotcom has 90cc MInarelli engines that bolts straight in.
Couple that with a Hoca High Performance PWK Carburetor for 50cc 2-stroke 1PE40QMB Minarelli Jog engines in 24mm and it will absolutely fly. see my videos of a Genuine Buddy with a Rattler engine (same engine) 72mph.
Scootertuner1000 2 years ago
@X7rocks parts for scooters dot come has 90cc Minarelli engines, it's a straight swap. I have done it and you should get 65-70mph with a 21mm Delorto with 90 main jet, Leo Vince exhaust. See my videos. The Buddy 110 has a PGO/Genuine Rattler 100c engine with prima exhaust and 21mm Arreche carb (fits the PGO manifold) that does 73mph, with massive acceleration
Scootertuner1000 1 year ago
i have a 2004 united motors x-peed 50 it looks similiar to this scooter. how much faster will it go if i install this
westleyiscute 2 years ago
Well, you would probably want to install the leo vince pipe intended for 50-70cc scoots and not the one for 100cc scoots like mine. I'm not sure how much faster you'll go exactly, but most people get at least a few MPH from a good pipe.
90gtvert 2 years ago
I had a UM X-Peed, it did 55mph with a Leo Vince ZX and no other mods.
Scootertuner1000 2 years ago