June 12th Soundsgood auto Car audio competition IASCA 1x Sanctioned event

[JCL404]

that Hispanic guy was funny

[OKanaganDCaudio]

@JCL404 Yeah he was awsome ! We met some real cool people down at the show. He gave me some awsome pointers about candy paint / Doing the inserts of the rims to match the vehicle, etc.

[SkaterForLife0121]

is this one of the series you have to wear headphones/earmuffs during?

[OKanaganDCaudio]

@SkaterForLife0121 if you are over 140db

[lukepaddle]

will be this saturday at andres car audio in pg over 10k in prizes trophys tons of cool stufff so come on out

[lukepaddle]

just come out with what you have and youll do fine its a usaci show youd be over 150 in usaci forsure , just come out with what u have will gain u respect man we need more cars there

[OKanaganDCaudio]

@lukepaddle Sounds good luke will start looking into planning & see what i can do ! When is it sunday or this saturday you said ?

[lukepaddle]

theres several shows in alberta i aug and july , including a couple double show weekends so just check the calender and come out , the pg show this saturday will be very big

[OKanaganDCaudio]

@lukepaddle I dont know if i will be able to make it for the PG show, Just dumped my cheque into 3x D1400 XS power batterys for this month & paying for my battery bank under the truck to get done. I will be ready to compete again in July / Aug / Sept. I MIGHT be able to come to PG this week, But it will be the same setup just better voltage / alternator issues resolved & i can probably tune the amp a bit better with more time Given the chance to get on the term lab b4 hand.

[lukepaddle]

just continue to come out to every show u can find and for that people will take you seriously , good luck hope to see u in pg

[OKanaganDCaudio]

@lukepaddle For sure man, Will do my best to make it up there ! It is just hard when the roads are bad with the rims / low profiles i have.

[lukepaddle]

np man u guys did good , but you have still have to come out to every show you can and take the advise that people give and they will respect you , there are several things u can do get over 150 right now for instance shrink your box down , and try port to the rear , with a steve meade style port , if that doesnt work try a huge slot ontop thats twice the size of whats in there now another thing u can do is tape the surrounds of the subs as they were probably leaking like crazy

[OKanaganDCaudio]

@lukepaddle Yeah when we first tested this box out outside of the jimmy to get all of the dust & stuff out, There was some serious leaks on the sides. We didnt have time to fiberglass resin / cloth the top / sides to seal it right up & also some type of adhesive maybe under the subs while we screw them in to complete that seal would work good aswell.

[OKanaganDCaudio]

@lukepaddle My next enclosure is going to be bigger & the port will be 20 square inches larger. This enclosure is maybe 11cubes after displacement, Next will be 14 cubes & 2'' shorter. So 190 square inch port. I should have it ready for creston. It will be tunned to 27hz, So droppin them beast notes. I really prefer hitting the higher DB's at lower frequency its much harder. You guys should see my voltage now, Well to luke its probably nothing but from compared to the show it is SO much better.

[OKanaganDCaudio]

@OKanaganDCaudio When i have my 2 5k's & new enclosure and my 14v battery bank under the truck where my spare tire is right now ( BIG PROPS TO ASF Custom FAB for taking on the job !!! ) for creston, I should be in mid 150's with music and low 50's burping @ low frequency

[OKanaganDCaudio]

@69greger Actually my belt was half way off of my tensioner arm & I couldnt hold over 12.4 then would drop EXTREMELY low. Go eat your wheeties for the day you grump son of a bitch & stay off this channel.

[loudpete223]

Congrats on the numbers bro they will just go up from there after the 2nd 5K

[OKanaganDCaudio]

@loudpete223 I hope low 50's when i deaden my roof & now with my solid 15.5v that doesnt budge. Also there is 2 spots on my hatch that leak out air so the hatch can close when the windows are up, But if you seal those with sound deadener you can gain a TON of DB because it wants to escape right out the back there, Just didnt have time to even do those little areas. But that & the roof will be done for next show.

[lukepaddle]

it just comes down to you have to earn respect you cant just show up or post online without posting up some numbers and gaining experiance at shows , I can understand u guys finished up last minute but at the same time there are alot of loud vehicles in bc and you have to earn the right to call yourself loud or have others call yourself loud , so put up some numbers and continue to come out to shows and ull get respect

[OKanaganDCaudio]

@lukepaddle Everybody there including team shadow was extremely impressed not to mention everybody from soundsgood was getting demo's and giving us huge props, So fuck all thease haters that need to get there game strait. We are well on the way to the top for our first show we stomped out & took home the mash potato's.

[OKanaganDCaudio]

@OKanaganDCaudio We arnt claiming to be the loudest, But we are claiming we did very well with all things considered. Just watch as we improve, We will earn our spot & respect in the culture.

[OKanaganDCaudio]

@lukepaddle Luke would just like to say thanks for helping run the show & Keep things going smoothly ! Maybe next time you can grab a demo of the jimmy id be honored to get your opinion on it ! Again great job keeping things running smoothly.

[GotNoCredentials]

@69greger things will change in the near future man. =D

[GotNoCredentials]

@69greger hes your only friend on your page lol

[GotNoCredentials]

@69greger you post like your friend ddkingz rude and obnoxiously.  see you in august.. zzzzzzz

[GotNoCredentials]

@69greger would a vehicle even run if it dropped to 9 volts???  wouldnt it stall out?

[OKanaganDCaudio]

@GotNoCredentials Yeah, Lowest i dropped was 12.1v at one point and i got fairly scared, It might have even beenin the 11's but when i pulled out of the lane the electrical was deffinatly flashin in and out, I was like wtf ? then when we got back & went to ASF it all made sense lmfao

[loudpete223]

I used to live across the river @ 5:45, Still watchin only got to 10:00 haha

[neonman1995]

deaden hatch and roof 1st will help your numbers out .

[GotNoCredentials]

@neonman1995 Yup im doing the roof FOR SURE first. then the hatch

[OKanaganDCaudio]

@GotNoCredentials This was me posting again, On kyles account

[OKanaganDCaudio]

@neonman1995 Yeah im gonna do some insane deadening on the roof first. Then a few key areas on the hatch, But i think that alone will get me into the 50's i am loosing so much SPL from my roof, Even my doors litterally come almost right off the hinges, You can see outside while ur sitting in the jimmy from the amount of door flex.

[LoudNLow931]

Once you add that other 5k you should be over a 150! lol at that butt plug XD

[GotNoCredentials]

@LoudNLow931 My alternator was held on with 1 bolt, My belt was slipping so bad id dip into high 12v range but i didnt know the bolts where broke until we got it fixed today. It is ALOT ALOT louder now, So i know for sure my peaks will be atleast over 150 with this amplifier alone, Especially when we fix the air leaks.

[LoudNLow931]

@GotNoCredentials Yeah with your wall when you finish it you should be way over a 150 hopefully haha. DC FTW!

[GotNoCredentials]

@LoudNLow931 Problem this time was my bracket being held in with 1 bolt & wobbling all over making my belt slip so bad i could hardly get over 12.3v wheni was really hammering it and had to back off because i was clipping so bad. I just got my alt fixed today by ASF spring & fab in town and I just installed my mechman voltage boost module, Lets just say. Andrew's voltage is sex gravy & there shall be no more alternator whine or issues at all.

[OKanaganDCaudio]

@GotNoCredentials LOL you forgot to log out from here kyle so i accidentally posted that under your name ! But that was me :)

[OKanaganDCaudio]

@LoudNLow931 I will hit over 50 when i fix my air leaks in the enclosure & Also now with my alternator issue resolved. Also i am running @ 15.5v with my kinetiks & in a few weeks will be at high 16v range. Also the sound deadener factor is another huge one, My roof is literally going to die. and its letting out so much SPL.

[BigBHomie54]

why is this video so damn long hahaha!!!!!

[OKanaganDCaudio]

@BigBHomie54 Long like my dick ?

[mtbman90]

sick vid dude. thanx again for the demo. TEAM DC Audio FTW!!

[GotNoCredentials]

@mtbman90 No problem man pleasure was all mine wish i had of known about my broken alternator bolts b4 the show ! Now its much louder with the propper voltage.

[OKanaganDCaudio]

@GotNoCredentials This was me posting kyle forgot to log out from my place :)

[RobCarnag3]

I like that you filmed the whole thing, pretty cool. Decent numbers too. I went to a show this past weekend and did a 150.8 at 41hz first time on a TL.

[EdgarCer1]

@RobCarnag3 nice man!! :D



[GotNoCredentials]

@RobCarnag3 Thats awsome #'s man, We where so close ! I think for sure next time we will hit in the 50's.

[OKanaganDCaudio]

@RobCarnag3 Thanks man, It means alot you appreciated the format in witch i edited it, I thought giving the viewers kind of the "hole experiance" type short movie would be cool way to approach it, Those who dont like it dont haveta watch it.

[GotNoCredentials]

awesome vid man! the guy with 4 12's beat me by .2 db. thats RIGHT!!! POINT 2. like .2 <<< omg. and i fudged the last run.

[OKanaganDCaudio]

@GotNoCredentials You would have had it if you didnt fudge that round, We all made mistakes since it was our first time. Still did AWSOME.

[OKanaganDCaudio]

Most epic flex @ 37:00 Peak of 148.9

[OKanaganDCaudio]

Watch the hole 1hr episode :) This is what all our vids will be like when it comes to major shows that we travel too.