@detheridge47150 you wont need an extra upgrade to an high output alternator for alot cheaper and easier and youll be fine. just dont bump too much with it not running.
i don't really remember about the paint, but i know it was out of a can then sprayed on. i did a red base coat then put on vinyl rockford fosgate stickers before the final black coats. i'm pretty sure it was gelcoat but not 100% positive.
well what would you suggest then? thats a 91 loyale, thats about the only place those 6x9's can go. they won't fit in the doors or anything... are you thinking they are distorting like when you've got a sub in the trunk of a sedan and the rear speakers sound like crap cause the sub is moving them?
well i've never heard my bottom out or anything, but i have had practacly maxed out the surround on a few occasion. so i'd say 300rms would be good might be too much on some real low notes but whatever just watch out for em
take that amp and wire the sub in parallel. your amp will prob put out 600watt rms, then get a multimeter and set the gains so that the speaker output is 27 no higher than 28 volts
or wire it at 4 and 300
neither will hurt the sub....unless its distorted sound
How many watts is the 15?
hersheyx0x0 8 months ago
im getting pretty much same setuo and i will be running 250rms do you thank i can just use my regular battery and not need and extra?
detheridge47150 11 months ago
@detheridge47150 for that much rms you woundnt need a 2nd battery
Objected2Drop 9 months ago
@detheridge47150 you wont need an extra upgrade to an high output alternator for alot cheaper and easier and youll be fine. just dont bump too much with it not running.
TylerAllisonFTW 8 months ago
did u make that box?
tjcrawler94 1 year ago
how many watts u pushing to that p2? cuz if i were to get it it i would be pushin 650 to it and i dont wanna blow it. think 650 is to much?
KamikazeProductions1 1 year ago
i like the box what is it made of like what is it wrapped or painted with?
r0ckf0rd2011 2 years ago
i don't really remember about the paint, but i know it was out of a can then sprayed on. i did a red base coat then put on vinyl rockford fosgate stickers before the final black coats. i'm pretty sure it was gelcoat but not 100% positive.
retarded2dragon 2 years ago
that would distort ur 6x9s straight out
shazza9275 2 years ago
it didn't sound too bad to me
retarded2dragon 2 years ago
@retarded2dragon lol ..... its no were near as good as it could sound
shazza9275 2 years ago
well what would you suggest then? thats a 91 loyale, thats about the only place those 6x9's can go. they won't fit in the doors or anything... are you thinking they are distorting like when you've got a sub in the trunk of a sedan and the rear speakers sound like crap cause the sub is moving them?
retarded2dragon 2 years ago
whats the name of da song
DBlazer85 3 years ago
da name iz da blow - lil john
retarded2dragon 3 years ago
do you want some koolaide to go with that ghetto system ??? haha. just playin man,
rickymac21 3 years ago
what u got powerin that?
playa4ya06 4 years ago
a pos insignia amp. one of those 360 watt one, it was like $40 off ebay.
retarded0dragon 4 years ago
what RMS is that amp running?
laxfanVT 3 years ago
250
retarded0dragon 3 years ago
u think 300 RMS would be to much for the same sub? Im getting the power acoustic 1100 watt amp and it runs at 300 RMS at 4 ohms.
laxfanVT 3 years ago
well i've never heard my bottom out or anything, but i have had practacly maxed out the surround on a few occasion. so i'd say 300rms would be good might be too much on some real low notes but whatever just watch out for em
retarded0dragon 3 years ago
alright i'll give it a try thx!
laxfanVT 3 years ago
that speaker can handle 400watt rms
the p3 can candle 600 watt rms
...so no
take that amp and wire the sub in parallel. your amp will prob put out 600watt rms, then get a multimeter and set the gains so that the speaker output is 27 no higher than 28 volts
or wire it at 4 and 300
neither will hurt the sub....unless its distorted sound
enjoy
630PRODIGY 7 months ago