1. It was ils landing not autoland , you should deactive a/p atleast at 500 ft (still dont know why did you try to make cat III ils with those perfect weather conditions) you should make visual approach right after localizer has been captured and aicraft is stabilized.
2. TOO FAST! Set speed manualy! Dont use automatic speed (---) on final. How fast you was flying? 180 kts on the final? lol
When training a pilot in a real plane an autoland can be performed with CAVOK, you don't need bad weather, if you are over minimums, you can do and autoland.
I don't remember but thrust is controlled by ap, the only thing you control are flap and landing gears because brakes and spoilers automatically deploy at touch down. you only switch off the ap
Can you tell me where I can adjust the landing course for ILS in the A 330 ??
I know that in all of the standard FS aircrafts, there are special "course" buttons (CRS) but in the A 330 I can't find such a button. Do you know where I can adjust the course for the ILS in this aircraft?
If you have the PSS A330 the fmc will set land automatically if the A/P is on but if you have an A330 like Posky with a Panel likes Ken Mitchell panel you have to select the approaching that you want to do from the default GPS of FS then activate it and after you only have to click the APPR button on the cockpit.if you do this the A/P will not follow the Glide Slope and you must take control of the plane.sorry for my english but i'm not english. =) hope to have been useful
i took off from a near airport and i set the fmc, at TOD plane start to descent, AP will engage the ils signal and after he will follow the glide path,when the plane touch the runway you need to disengage the AP. I hope to have been useful
TAKE THE GRAPHICS DOWN!! U got so low frames. its laggy like hell. and u should only use autoland in BAD BAD condisions omg omg omg lame that some peoples use autoland in wrong weather
Where did you get those water textures¿¿??
SlashTruck 8 months ago
@SlashTruck runway texture from avsim and the water is from an environment pack from avsim
berga10mito 8 months ago
does the gpws only start at 400 not 1000
PilotInCommand100 1 year ago
@PilotInCommand100
I don't remember very much because i replaced it with wilco vol.2 airbus.
wilco gpws start at 1000 then 400,300,200 (minimums depending on DH),100, 50,40,30,20-retard,10
berga10mito 1 year ago
@berga10mito Are u sure its retard i think its recharge lol
FSVIDS121 1 year ago
Valkata :D
Flylal05 1 year ago
PSS is sort of weird, because you cannot activate the APP button at certain times which frustrates me.
qwertyguy76 2 years ago
LAG
LibertadorXXL 2 years ago
DUDE IT'S NOT A BOEING MAN. Fly this at 133 as Vapp lol 160 WTH?
sonicfan7 2 years ago
1. It was ils landing not autoland , you should deactive a/p atleast at 500 ft (still dont know why did you try to make cat III ils with those perfect weather conditions) you should make visual approach right after localizer has been captured and aicraft is stabilized.
2. TOO FAST! Set speed manualy! Dont use automatic speed (---) on final. How fast you was flying? 180 kts on the final? lol
mazurxxx 2 years ago
lol
1. i was bored to land manualy. lol
2.I don't remeber. lol
berga10mito 2 years ago
landing manually doesnt bore!
SuperPatchman 2 years ago
yeah i agree with mazurxxx, with these weather conditions you shoud land manually earlier about 1000 Fts.
chamilitary999 2 years ago
When training a pilot in a real plane an autoland can be performed with CAVOK, you don't need bad weather, if you are over minimums, you can do and autoland.
Tovkal 2 years ago
I agree ;
But why don't use automatic speed ? The Wilco reduces speed by itself when you lower the flaps; full flaps = final approach speed ...
Don't know about PSS
MisterDirtyWorkz 2 years ago
@mazurxxx du hast ja keine ahnung junge!!!
Dschedsche 1 year ago
do you think wilco's a330 is better that pss's a330?
Captainbritishair 2 years ago
I don't know, i think that pss's texture sucks a bit but the cockpit is easy to handle. but i never tried wilco's a330
berga10mito 2 years ago
i have the wilco airbus series 2 with the a330 but there are some bugs sometimes in the fmc and in the pss one yoiu can programm 2 routes
chamilitary999 2 years ago
all you do is control the brakes,ap,spoilers,thrust,flaps and landing gears?
LordAlwinTHC 2 years ago
I don't remember but thrust is controlled by ap, the only thing you control are flap and landing gears because brakes and spoilers automatically deploy at touch down. you only switch off the ap
berga10mito 2 years ago
does it goes the same to b777?
LordAlwinTHC 2 years ago
i don't now
i never use the 777
berga10mito 2 years ago
i got it all in the fmc but what button do you push for autoland?
anush10 3 years ago
I push the button on the A/P panel
berga10mito 3 years ago
oh okay thx
anush10 3 years ago
does this have fbw simulation?
aivalas 3 years ago
if you put the corret informations in the fmc you only have to push the correct button and the plane will goes in automatic
berga10mito 3 years ago
nice videoo
but where did you download this airplane ?
thanksss
GabaoO99 3 years ago
do you know E-mu*e?I download it from there..
berga10mito 3 years ago
it means: Laughing my Fucking ass off.
eclipse245 3 years ago
LMFAO!!!
That GPWS is retarted...it says 100 when you're at like 40.
eclipse245 3 years ago
what does LMFAO mean?
berga10mito 3 years ago
Is it me or the airplane bounced ? xD
I think only PMDG and LevelD have good autoland as they flare properly...not like PSS or Wilco...Or maybe it's me o_O ?
mokona591 3 years ago
yes, the plane bounced a bit.
berga10mito 3 years ago
Very nice landing... only one question:
Can you tell me where I can adjust the landing course for ILS in the A 330 ??
I know that in all of the standard FS aircrafts, there are special "course" buttons (CRS) but in the A 330 I can't find such a button. Do you know where I can adjust the course for the ILS in this aircraft?
Flow198812 3 years ago
If you have the PSS A330 the fmc will set land automatically if the A/P is on but if you have an A330 like Posky with a Panel likes Ken Mitchell panel you have to select the approaching that you want to do from the default GPS of FS then activate it and after you only have to click the APPR button on the cockpit.if you do this the A/P will not follow the Glide Slope and you must take control of the plane.sorry for my english but i'm not english. =) hope to have been useful
berga10mito 3 years ago
wow fraps killed your frames so bad it was giving me a headache lol
clearancedelivery 3 years ago
yeah?=)lol
berga10mito 3 years ago
where did u get the plane?
lbmagic99 3 years ago
Nice landing! What system do you use? Vista or XP? Thanks.
colesy93 3 years ago
Hi!Thanks for the comment, anyway I use XP.
berga10mito 3 years ago
Ok, Thank you! ; )
colesy93 3 years ago
hey can you tell me how to do that, i dont understand how you do it
thanks
leedsrocks199 3 years ago
i took off from a near airport and i set the fmc, at TOD plane start to descent, AP will engage the ils signal and after he will follow the glide path,when the plane touch the runway you need to disengage the AP. I hope to have been useful
berga10mito 3 years ago
yah man use damn autoland anyway you want LOL!!!
simon70 3 years ago
wtf he can use the autoland if he wants
wstcyd2 3 years ago
TAKE THE GRAPHICS DOWN!! U got so low frames. its laggy like hell. and u should only use autoland in BAD BAD condisions omg omg omg lame that some peoples use autoland in wrong weather
peterflightsim 3 years ago
What graphics accelerator are you using?Tha tlooks too real.
ALPHAENGINE 3 years ago
I'm using the graphics cards Nvidia GeForce FX5500 with the 3d accelerator
berga10mito 3 years ago
lagggg!!! LOL
777RulesTheSky 4 years ago