Hi!! how did you connect G-Major to PSA? used FX Loop in-outs? i have the same kit...cant understand how switches 50-100% works....can you explain to me slowly how get real sound ....sorry my english....((( realyur@mail.ru
@KevynBuhrMusic no, as long as the output level of the preamp and the input level of the tc is set properly (input has to be loud enough) ... and also off course no extreme setting in the noise gate itself ...
I use mine with the Auiliary input on a little Fender Frontman 15G amp and Boss GX700 fx which bypases the preamp in much the same way as using an fx loop return - seems a little strange using over £800 quid's worth of Sansamp and FX with a £70 quid practice amp but it REALLY does work. PSA-1 don't need no preamp. Thanks - nice demo.
hay mate did u run it as the sansamp as ur pre amp then the g-major on the fx send return? if not why not and also would it give u shitter tone to do it that way,,, p.s ur sounds fucking awsome bro good work
@2007jhi thanks for the comment. i think i used them in serial not send return mode, so that i can use the noise gate in the gmajor to fully tamed the psa gain .. i think i also used serial/semi parallel mode in the gmajor instead of parallel ...
yes you can its just gonna sound little bit different (you have to tweak it some more).. but i had an opportunity to try my setup (psa, g major, gsp1101) direct to mixer/PA system in a huge hall ... wow really its a monster !!!! so thick a distortion hehehehehe....
hi gonzi.. i'm really sorry i can't seem to find time nowadays.. i used to had the frustration also... but all i did was to really sit down with those gears and the manual in front of you, and go through the manual one by one (it was probably due to my bad english).... thanks so much for the compliment btw ...
why not? but u have to be careful when buying used stuff, make sure that the neck is straight, the electronics are working properly... and test test test... but if u want my review, i am very satisfied with this guitar.
i havent got chance to have a hand on psa 1.1 its the later model of psa 1. they put on/off switch and some other improvement, but according to tech21 the sound remains the same ..
Great sound nad demo man! How good is the match of the PSA and the GMajor? im trying to save money to buy it! Oh! The PSA-1 dont have a power switch or i dont find it?? Cheers
for bro "cherioricci" (sorry if i got your id wrongly since i only seen for such a short time).... sorry I accidently deleted your comment... thanks v much for your comment and yes i connect them serially.. guitar-psa-gmajor-amp...
Nice playing! Great tone! Was the FCB 1010 easy to get setup with the TC? Thinking of moving over to the G major with the FCB...always had all in one floor boards...
thanks for the comment.. fcb+gmajor - you can find the instructions quite easy in the net, but most important is read carefully while doing it step by step, then its quite easy once u got the idea. U should try rack bro .... go for it ... i now combine the gmajor and psa with gsp1101...
thanks bro.. the heart is the psa.. as long as u have a noise gate to tame the beast u'll be fine.. just use the reverb from your amp.. so 1. look for second hand psa 2. look for second hand noise gate (pedal also fine)...
Hi!! how did you connect G-Major to PSA? used FX Loop in-outs? i have the same kit...cant understand how switches 50-100% works....can you explain to me slowly how get real sound ....sorry my english....((( realyur@mail.ru
realyur 2 months ago
Dude, does the TC noise gate affect the sustain of the notes ? I mean, does it chop it before their natural time ringing ? Cheers, and thanks a lot!
KevynBuhrMusic 5 months ago
@KevynBuhrMusic no, as long as the output level of the preamp and the input level of the tc is set properly (input has to be loud enough) ... and also off course no extreme setting in the noise gate itself ...
enamsenar 5 months ago
I have one of these guitars, really good playing guitar. Very clean sound you got there love the metal riffs!
SirSmighty 6 months ago
@SirSmighty thank you very much!!!
enamsenar 5 months ago
Amazing sound.. how much did you pay PSA1 ? and TCE ?
ivanics 1 year ago
I use mine with the Auiliary input on a little Fender Frontman 15G amp and Boss GX700 fx which bypases the preamp in much the same way as using an fx loop return - seems a little strange using over £800 quid's worth of Sansamp and FX with a £70 quid practice amp but it REALLY does work. PSA-1 don't need no preamp. Thanks - nice demo.
Twirlyhead 1 year ago
hay mate did u run it as the sansamp as ur pre amp then the g-major on the fx send return? if not why not and also would it give u shitter tone to do it that way,,, p.s ur sounds fucking awsome bro good work
2007jhi 1 year ago
@2007jhi thanks for the comment. i think i used them in serial not send return mode, so that i can use the noise gate in the gmajor to fully tamed the psa gain .. i think i also used serial/semi parallel mode in the gmajor instead of parallel ...
enamsenar 1 year ago
Man...that is some killer tone. Are you running the PSA-1 and the G-Major through that little Ibanez practice amp?
MeTuLHeD 1 year ago
@MeTuLHeD thanks.. yes thru the little amp..
enamsenar 1 year ago
Why do you have a switch like that on your kh-203? I have an regular 3 way switch..
Mod maybe?
JakobAntonsson 1 year ago
@JakobAntonsson yes i think modded from the shop
enamsenar 1 year ago
sounds great...
felipeasjardim 1 year ago
thanks v much ...
enamsenar 1 year ago
hey frnd....never ever usa psa with guitar amp...if u want grt sound...usa active monitor or amp without preamp section....this is challenge.
vineetstrings 1 year ago
i guess the easiest would be using amp without the preamp because you won't have to tweak it again on stage :)
enamsenar 1 year ago
Hey Dude, Just want to say:
Your rock playing sounds very good:
It's In tune,
Rhythm is steady and lively, with
Clear articulation and authentic tone.
You have the three "T's"
Timing, Tuning and Tone
Good choice of gear too!
Keep rockin!
OldSchoolSkill 1 year ago
wow... thanks for the compliment... btw u have the same gear?
enamsenar 1 year ago
thats true then no need for you , to use PSA.
vineetstrings 1 year ago
use the psa as the preamp ...
enamsenar 1 year ago
i am using same sans amp 1.1
vineetstrings 1 year ago
Can we use PSA-1 through Technics Hi-Fi Receiver acting as a poweramp with this performance ?
intaomri 2 years ago
yes you can its just gonna sound little bit different (you have to tweak it some more).. but i had an opportunity to try my setup (psa, g major, gsp1101) direct to mixer/PA system in a huge hall ... wow really its a monster !!!! so thick a distortion hehehehehe....
enamsenar 1 year ago
Hahaha nice vid. :D i got the same amp. :D
gorillazmaster 2 years ago
hehe thanks... u mean the ibanez? its ok i guess :)
enamsenar 1 year ago
hey dude, sounds awesomeeeee!!!
can you explain me in a video, how to configure FCB1010 with the g major... pleeeeeeeeeeeeeasseee pleasee.
i have both... and i have readed the manual for 3 weeks and i cant make it work togheter :S... and theres no instructional videos on internet.
please pleaseee can you make it that favour? :)
gonzigranja 2 years ago
hi gonzi.. i'm really sorry i can't seem to find time nowadays.. i used to had the frustration also... but all i did was to really sit down with those gears and the manual in front of you, and go through the manual one by one (it was probably due to my bad english).... thanks so much for the compliment btw ...
enamsenar 1 year ago
would you recomend this guitar to an intermediate guy?
my local guitar shop lsited that they have one of these in stock used for 400 bucks....i got all excited and I looked up demos
bergaminivideos 2 years ago
why not? but u have to be careful when buying used stuff, make sure that the neck is straight, the electronics are working properly... and test test test... but if u want my review, i am very satisfied with this guitar.
enamsenar 2 years ago
yeah im going to probaly go check it out tomorow
thanks for the tips though
but yeah.....im one of those guys who have a lot of fun at guitar center....i will make shure to test lmao
bergaminivideos 2 years ago
such a fucking hot sound out of an cheap ibanez 15 or 30 watt cube how did you make this
MrIcebloc 2 years ago
thanks!! well its not the ibanez... mainly its the psa-1, then the guitar, then the g major ..
enamsenar 2 years ago
hi guy ,
great sound !
Can you share your settings with me too please ?
Cheers !
Flv75 2 years ago
hi thanks.. u can pm me, lets see if i still remember since this is quite a long time ago (i already changed my setup) ... but anyway u can pm me...
enamsenar 2 years ago
Hi!
Does the Sansamp work good for Metallica sound even though i havent got EMGs?
BallonkaSwe 2 years ago
i really do believe so.. really ... i didn't push the drive and preamp knobs to the max, so still lots of room to increase the distortion ...
enamsenar 2 years ago
couild someone tell what song he is playing from 1.28 many thanks
jackdslash 2 years ago
just random playing, it could be from some metal song ...
enamsenar 2 years ago
What is the difference between the psa 1.1 and the psa 1?
1akez1 2 years ago
i havent got chance to have a hand on psa 1.1 its the later model of psa 1. they put on/off switch and some other improvement, but according to tech21 the sound remains the same ..
enamsenar 2 years ago
Hi there, love your tones! I've got a sansamp PSA1 and was wondering what patch you're using from 1.04? It sounds great - really thick.
If it's one of your own patches rather than a factory preset, would you please be kind enought to post your settings?
Many thanks! And keep up the great work!
swordio777 2 years ago
thanks swordio i'll pm u
enamsenar 2 years ago
stache!!!
thedddemon 2 years ago 2
hahaha yea ... well spotted dude...
enamsenar 2 years ago
what poweramp are you using?
nuokki 2 years ago
plugged it in to the ibanez
enamsenar 2 years ago
great job! kool tone!!!
809742002077 2 years ago
thanks much..
enamsenar 2 years ago
THAT'S AWESOME METAL TONE!!!
would you please share your parameter with me?
inewigkeit 2 years ago 2
Great sound nad demo man! How good is the match of the PSA and the GMajor? im trying to save money to buy it! Oh! The PSA-1 dont have a power switch or i dont find it?? Cheers
marianolarata 2 years ago
right, if you want a power switcher, buy a "PSA 1.1"
marcanb28 2 years ago
PSA + G major has no problem as u can see from my video ...
enamsenar 2 years ago
Nice. Finally someone who knows how to play giving a proper demo.
Good job.
homersimps1 2 years ago
Thank you very much.
enamsenar 2 years ago
yes agree, one question: do you think we can have a Rammstein distortion with this gear?
iFuckYOUcoZiCan 2 years ago
Paul use the sansamp PSA1..
SBASWilliam 2 years ago
pablo gilberto?
enamsenar 2 years ago
no, paul landers from rammstein. i respond to iFuckYOUcoZiCan
SBASWilliam 2 years ago
thanks SBAS..
enamsenar 2 years ago
cool demo bro.. !
give us more
SnoopDodz 2 years ago
thanks... will try to ...
enamsenar 2 years ago
for bro "cherioricci" (sorry if i got your id wrongly since i only seen for such a short time).... sorry I accidently deleted your comment... thanks v much for your comment and yes i connect them serially.. guitar-psa-gmajor-amp...
enamsenar 2 years ago
Nice tone! Which MIDI foot controller do you use? Are you applying compressor on the TC Major when using PSA distortion? Best regards.
profetaxxi 2 years ago
thanks profetaxxi and prockop for the comments... i'm using fcb1010. yes i little bit of compression..
enamsenar 2 years ago
nice:)
prockop 2 years ago
thanks..
enamsenar 2 years ago
Nice playing! Great tone! Was the FCB 1010 easy to get setup with the TC? Thinking of moving over to the G major with the FCB...always had all in one floor boards...
vainot4u 2 years ago
thanks for the comment.. fcb+gmajor - you can find the instructions quite easy in the net, but most important is read carefully while doing it step by step, then its quite easy once u got the idea. U should try rack bro .... go for it ... i now combine the gmajor and psa with gsp1101...
enamsenar 2 years ago
thinking of buying that guitar.. does it have a metal plate? it said it was bolt on and i hate those metal plates..
wiiownsuall 2 years ago
:) yes it has the plate..
enamsenar 2 years ago
whoa shit, now thats good tone... if only i had the cash to blow on one of those
tjtanz 2 years ago
thanks bro.. the heart is the psa.. as long as u have a noise gate to tame the beast u'll be fine.. just use the reverb from your amp.. so 1. look for second hand psa 2. look for second hand noise gate (pedal also fine)...
enamsenar 2 years ago
i read some bad reviews about the speaker sim, what about that ?, to much noise or what ?
radekxito 2 years ago
there is a speaker sim patch.. but to me psa-1 doesn't have speaker sim...
enamsenar 2 years ago
so, the way to use a preamp. is
guitar->preamp->guitar amp ?
radekxito 3 years ago
yes.. to be exact : gtr-psa-gmajor-amp (not using efx loop from psa) ... and controlled with fcb - g major midi in - g major midi thru - psa midi in
enamsenar 3 years ago
dude do you use it with a poweramp or something? cause you cant directly plug it to yout input what do you use?
kutaycal 3 years ago
am using it with the ibanez toneblaster
enamsenar 3 years ago
Thanks for the video! Sansamp 1.1psa ,how many tube/valve use?
i´m looking for engl E530 rack with 2 tube/valve or this Sansamp
THANKS
:3
juanchupanchu 3 years ago
psa is a solid state midi programmable preamp.. so no tube ....
enamsenar 3 years ago
thanks, i modified from marshall hi gain preset, r u using psa yourself? maybe we can share tips/patch. yes im running it into the ibanez.
enamsenar 3 years ago
Nice Sound! What Preset are u usin for the metal riff? Are u running your sansamp into the Ibanez?
vendo1267 3 years ago
any psa, g major, or fcb1010? maybe we can share tips or patch or anything?
enamsenar 3 years ago