Pull the pin all the way out and inspect it, if it is good, run a rope and rag through the holes, never your hands, and then grease the holes and pin.
Do the same for the retaining pin hole and put a locking pin in place.
Above this needs to be a locking pin, it is missing.
Now, go find you a grease gun and find a bunch of zerk fittings as it is clear that you are not doing a good job of PM, do you even check the oil and water? ;)
Could of had it back in, been back in the cab and loading trucks in the time it took you to film this. I thought this was serious when I clicked on it.
dickhead
bjkerp 5 months ago
wtf, what, you never switched buckets?
skylinerintegra 5 months ago
This has been flagged as spam show
what do you expect its a john deere
italianjob1100 5 months ago
what do you expect its a john deere
italianjob1100 5 months ago
Was this a joke?
regdapimp06 5 months ago
we use our 450 to clean the tracks
TIGERCAT660 6 months ago
So, one of two bucket pins comes out.
Pull the pin all the way out and inspect it, if it is good, run a rope and rag through the holes, never your hands, and then grease the holes and pin.
Do the same for the retaining pin hole and put a locking pin in place.
Above this needs to be a locking pin, it is missing.
Now, go find you a grease gun and find a bunch of zerk fittings as it is clear that you are not doing a good job of PM, do you even check the oil and water? ;)
Arabhacks 6 months ago
@Arabhacks you will find there is no need to grease the pins on the bucket ,as the machine is fitted with a quick hitch
d4c24a 4 months ago
Why did this happen in the first place? Wasnt there an inspection performed prior to use?
That should have been seen. Dammit Jim, everything you touch turns to shit!!
(my boss on a good day)
Sreewtyui 8 months ago
YOUR FIRED!!!
bigbluetank1 10 months ago
Could of had it back in, been back in the cab and loading trucks in the time it took you to film this. I thought this was serious when I clicked on it.
HawkEyeOperator 11 months ago 2
Holly shit call somebody!!!
redzback 1 year ago
duct tape will hold that .....
XXINTL 1 year ago
wtf, i had bigger problems with lego..
neiltce 1 year ago 45
ooohh dear how bad!!!!
wtf?
998707OR 1 year ago
de är bara o ta fram slägga:)
hobbybonde 2 years ago
pffft! same thing happens to my 2 tonne IHI coz i couldnt be bothered putting a new pin in it
iveastiffie 2 years ago
@iveastiffie U would'nt be say'n pffft!, when ya bucket falls off and kills someone
MrKtmexcf 1 year ago
This has been flagged as spam show
@iveastiffie U would'nt be say'n pffft!, when ya bucket falls off and kills someone!
MrKtmexcf 1 year ago
what happened?
crazyknexkid 2 years ago
I'll lend you my 6lb sledge . knock thas sucker back in, put a new set of cotter pins in and your set. I just saved you 30million cents.
lmrideas82 2 years ago 18
hahahah 30m cents..nice
DevinL16 2 years ago
Better trade it in for a CAT.
SPACECADET2U 3 years ago
tsssssssssssssssssss......
ESPsplit 3 years ago
just get a rubber hammer and tap that thing back in
fattpieceofcrap 3 years ago 4
true dat haha
scarabkid22 2 years ago