1967 Chevy C-10 Walkaround

[0602720noeflores]

What does that Emblem say on the door ?

[dgosnell38]

@0602720noeflores It is a factory emblem, it says "custom" and has a blue and red stripe infront of it. I think it is 67-68 only.

[0602720noeflores]

@dgosnell38 Nice im going to restore a 1981 gmc pick up short bed and i want to get it Bone stock and looking for emblems cuse when it comes to selling its worth more with emblems

[dgosnell38]

@0602720noeflores Cool, I like the square bodies! Check out the video for Lone Star Throwdown 2012, I was just in the show and there are alot of square bodies on the vid.

[0602720noeflores]

@dgosnell38 Yeah it used to be my dads favorite truck he would drive it everywhere but they crashed it and so after that he didnt have any money to fix it so he just parked it and it stayed park for like 8 years and so rigth when i turned 16 i got a part time job got some Tabs and battery and fired that babe on and its amazing so now im going to save up to do a Frame off restoration

[RUSHNBOBO]

David wasssss up ........you almost won the TOTM on 67-72 .......the gestapo gave me the boot after one too many "infractions" in the same day, when you get a chance check out the action over at C10 forum .....much more laid back over there....nice job on the vid btw

TTYL.....Rush

[dgosnell38]

@RUSHNBOBO Amost. Oh crap you aren't on the board anymore?!?!? I am on the C10 forum also, just didn't go there much, still Slick67 there too. I'll swing by there and update! See ya there!

[RUSHNBOBO]

@dgosnell38 Just got back from C/10 Forum .......wow 9 posts since 09, give someone else a chance LOL......C/10 forum you can do "almost" anything....Shit that would get you banned for life on 67-72, I swear to god they must be freakin missionaries over there. We got an entire thread just for T&A !!!!....gotta love it , sometimes I even check out the rides too. Bunch of "perma banned" members from 67-72 have already migrated over, about 9000 members now.

Later....Rush

[dgosnell38]

@RUSHNBOBO Hhahahha, well I'll be over there more often!!!

[hutton1415]

Nice I got a 68 step side i'm just getting started on now great job man

[dgosnell38]

@hutton1415 Thanks! Long road ahead for you, but well worth it at the end!

[ricos64dubk]

are those 24" under there? Got to say Twisted Sick man. I got a 67 longbed with the small back window. Tried to put some 20's (6 lug)under it yesterday. I can't find any rims to fit all the way up against the drum???? Should i just take off the drums and be done with it? The bolt pattern lines up but the rim won't sit flush against the drum. There are these little stud looking things that stick out about 3/8" off the drum? What the hell are they? Can i grind them off?

Thanks for your time

[KEL7000]

thanx ...i love that c 10 i got a 1980 c10 im working on

[KEL7000]

wowwwww.. !!!

[dgosnell38]

@KEL7000 Thanks! Love your drag four wheeler!!!!!!

[pitchingwedge1]

Dude thats fuckin sick

[dgosnell38]

@pitchingwedge1 Hhahah thanks bro!!!!!

[Igotbling123]

About how much was everything to bag it out?

[dgosnell38]

@Igotbling123 Found everything on Craigslist still boxed with a front disk conversion for $900. I did the install myself with a little wiring help from a friend $0. I purchased c-notches that were new on Craigs for $45. So I guess about $700 total?

[slipknuts13]

VERY VERY Nice! is the side trim original? I'm about to drop some money into my 66 myself. i also hav a 327 in it. do feel like its making enough horse power? i want to make at least 400 hp without major mods. dont kno if should put something bigger. ur info wud be appreciated.hope mine looks clean like yours!

[TheMasterLoafer]

VERY nice truck... love how the rims were painted !

[The1971chevy]

Very nice clean truck what engine is in it?

[dgosnell38]

@The1971chevy Thanks Bro! By the casting numbers it is a 1966 Corvette/Camaro 327. I had camel hump heads built and a big cam installed, also has a 70' LT1 Winters Snowflake/Bowtie intake and an Edelbrock 650 carb. I have another video of the engine running here on the Tube.

[dgosnell38]

@The1971chevy It's a 66 vette/camaro 327 block with camel hump heads.

[MRALEX351]

Finally A Longbed, Real Nice

you should put some chrome lazy eye covers on the head lights

[dgosnell38]

@MRALEX351 Thanks!!!! I did think about those, but have not made up my mind!

[MRALEX351]

@dgosnell38

I say u do it bro, I have A 68 c10 longbed an the lazy eyes make it look Clean!!!!

[MRALEX351]

@dgosnell38

I say u do it bro, I have A 68 c10 longbed an it has the lazy eyes, makes it look Clean!!!!

Esspecialy when its Barely gettin dark an u cruzin haha

[MRALEX351]

@dgosnell38

I say u do it bro, I have A 68 c10 longbed an it has the lazy eyes, makes it look Clean!!!!

Esspecialy when its Barely gettin dark an u cruzin with the low lights haha

[vgalione]

@MRALEX351 this is a super clean truck but why all the emblems like the chevrolet on bed side and custom on the doors they look outta place and so does the antenna other then that the outside looks sweet i got a 1968 long bed myself you on any forums try out c10forum.com check out mine its under 67-72 section here is a link

[vgalione]

wont let me upload a link sorry

[MRALEX351]

@vgalione

uuummmm i think u replyed to the wrong person haha

this isnt my video haha

[dgosnell38]

Thanks Eightbanger!

[Eightbanger]

Stunning mate.!! Thanks for posting.

[scarlettngrayblood]

I have a 67 stepside and oh how i wish i was where ur at right now.Time,Money, and lot of apoxy primer.:)

[dgosnell38]

Should have seen it before I put the trim on it!

[clearcrap]

sure is orange.

[dgosnell38]

@clearcrap Shoulda seen it before I put the trim on it!

[kickassk5blazer]

sick truck bro! what kind of wheels are those and size? 22"?

[dgosnell38]

@kickassk5blazer

Thanks bro! They are BZO Elite. 20s in the front and 22s in the back.

[MrThekikster]

@dgosnell38 how did yo uget the body so straight

[dgosnell38]

@MrThekikster Dunno if the reply went back. Lot's of sanding and skim coats and sanding. Primer and epoxy primer were laid on thick then lots of block sanding. Alot of time too!!!!