I just fixed this took it out side ran over it with my left front wheel of my car a few time I'm going to pack up the parts and ship them to one of those repulsive male CEO's that make like 100 million a year at sony and recommend that he shove all the parts up his, were the sun don't shine
One other note...the new riboon won't look ANYTHING like the one your take off. If you're like me you'll say you've got the wrong part. The ribbon fold over on itself in a very unique way. Pay particular attention to how the the old ribbon is folded to get it right. Also watch out for the ribbon with the little toggle on it and where it goes. I'm still trying to figure that one out. The new ribbon does fit perfectly if you get it right. Again...patience is required...and very good notes.
It's the ribbon cable. You can buy one for $20. A word of caution, however. Replacing the ribbon is NOT an easy task. If you're comfortable with jigsaw puzzles then give it a shot. Take really good notes what came off of where/when and I'd recommend taking photos of each step or using another video of what you do so you can retrace your steps visually. I wasn't smart enough to do this so it was fun putting it back together. It can be done though...and you'll save a $300+ repair cost.
The same problem on my camera... I opened it to see if I could do something to fix it (incredibly opening and closing a device may help with simple problems on electronic devices sometimes ). But it didn't make a great difference. However, I found that if you open the LCD (just move it as if you were going to use the camera, don't unscrew anything!) about 10 minutes before turning the camera on to record, it starts working better (not perfect).
So that is exactly what my camera suddenly started doing....I did not drop it or anything and I have a bunch of videos stored on it, plus I want to use it. What did you do to fix it??? Thanks!
You can still get your videos off the camera if you do this.
1.Put camera on the plate thing that connects to the computer.
2.Plug USB into computer.
3.Turn camera on.
4.On the top left; Press the screen and the camera will connect to the computer where you can access all your files. May take a few tries (You'll know if it work).
5.Make sure you cut and paste your files into a folder on your computer to give you more room to record.
You have an internal connection issue. It can be the flex cable that should be changed. Sometimes, the flex cable can be cut and expose contacts by stipping the plastic isolation. The issue can also be a the connector level: either a bad solder on board that can be reworked with a soldering iron, or loss of pressure at the connector. In the last case, you can try to fit a paper or cardboard shim to fill the space to apply pressure.
I have a sony cyershot w210, just got in a few months ago, but it fell in the fround wile it was in its case! nothing broke, verything is working only for the screen is all blured and mulit coloured, you cant seen anything on it. Any suggestion please? i dont wanna but another one, i saved all year for that camera.
Sorry for writing late. I do repair these types of hardware problem. it costs nearly USD 125 including the spare parts provided the problem is due to the connecting strip only ( which is very common). If you wish to repair kindly let me know.
thought i was the only one with the same problem. DAMN YOU SONY!! DCR-SR200
SuperKVIDEOS 1 month ago
LCD Cable.....
5233filmstar 1 month ago
My DCR-SR42 does the same thing only not that fast.
akbychoice 2 months ago
Same thing happened to my camera what can i do HELP!!!
awordfromYvan 3 months ago
OMG I NEVER KNEW EVERYBODY HAD THIS SAME PROBLEM WITH THIS HOW CAN U FIX IT ITS BEEN LIKE THIS FOR 4 YEARS NOW
pkmnmaster29 4 months ago
I just fixed this took it out side ran over it with my left front wheel of my car a few time I'm going to pack up the parts and ship them to one of those repulsive male CEO's that make like 100 million a year at sony and recommend that he shove all the parts up his, were the sun don't shine
GoogleGas 6 months ago
yep same problem
GoogleGas 6 months ago
I have a similar problem with my sony dcr-sr45 the camcorder turns on but the touch screen is blank?
NJZanDatsu 7 months ago
WHAT IS WRONGE THE FUSE WENT OUT I HAD MINE IN THE SHOP TO TIMES
GoonCityTVFLA 8 months ago
my screen is white how do i fix that? i am going to holiday and i REALY need a fix does someone know?
Rubenwbrk 8 months ago
@Rubenwbrk Mine is doing the same thing now,did you find a fix?
ammohead73 1 day ago
@ammohead73
The fix is to buy a new camera, it's the cable that gives the screen signal, it broke...
Rubenwbrk 1 day ago
is the ribbon cable that is broken,
jarostars 10 months ago
I have the same problem, how can i fix it?
jarostars 10 months ago
One other note...the new riboon won't look ANYTHING like the one your take off. If you're like me you'll say you've got the wrong part. The ribbon fold over on itself in a very unique way. Pay particular attention to how the the old ribbon is folded to get it right. Also watch out for the ribbon with the little toggle on it and where it goes. I'm still trying to figure that one out. The new ribbon does fit perfectly if you get it right. Again...patience is required...and very good notes.
BeardJM 11 months ago
Comment removed
BeardJM 11 months ago
It's the ribbon cable. You can buy one for $20. A word of caution, however. Replacing the ribbon is NOT an easy task. If you're comfortable with jigsaw puzzles then give it a shot. Take really good notes what came off of where/when and I'd recommend taking photos of each step or using another video of what you do so you can retrace your steps visually. I wasn't smart enough to do this so it was fun putting it back together. It can be done though...and you'll save a $300+ repair cost.
BeardJM 11 months ago
The same problem on my camera... I opened it to see if I could do something to fix it (incredibly opening and closing a device may help with simple problems on electronic devices sometimes ). But it didn't make a great difference. However, I found that if you open the LCD (just move it as if you were going to use the camera, don't unscrew anything!) about 10 minutes before turning the camera on to record, it starts working better (not perfect).
ViveLeBaroque 1 year ago
i hav the same camera and when i turn it on its TOTALY BLANK PLZ PLZ HELP ME WHT DO I DO
KingRooike 1 year ago
So that is exactly what my camera suddenly started doing....I did not drop it or anything and I have a bunch of videos stored on it, plus I want to use it. What did you do to fix it??? Thanks!
ralstongirl 1 year ago
@ralstongirl Same thing happen to me as well -_-.
You can still get your videos off the camera if you do this.
1.Put camera on the plate thing that connects to the computer.
2.Plug USB into computer.
3.Turn camera on.
4.On the top left; Press the screen and the camera will connect to the computer where you can access all your files. May take a few tries (You'll know if it work).
5.Make sure you cut and paste your files into a folder on your computer to give you more room to record.
-Anthony
NoTATIOnAnthony 1 year ago
My sony handycam dcr dvd201e show's white on the screen only could anyone have a solution how to fix it??
Wili63 1 year ago
i have the same problem! sony dcr sr62
Bikerboi 1 year ago
Anyone tried doing this themselves. The flex cable itself runs for around 20$ on ebay. Just don't have instructions on how to open the damm thing :(
Can someone help?
mtpanjwan 1 year ago
You have an internal connection issue. It can be the flex cable that should be changed. Sometimes, the flex cable can be cut and expose contacts by stipping the plastic isolation. The issue can also be a the connector level: either a bad solder on board that can be reworked with a soldering iron, or loss of pressure at the connector. In the last case, you can try to fit a paper or cardboard shim to fill the space to apply pressure.
patenteux 1 year ago
I have a sony cyershot w210, just got in a few months ago, but it fell in the fround wile it was in its case! nothing broke, verything is working only for the screen is all blured and mulit coloured, you cant seen anything on it. Any suggestion please? i dont wanna but another one, i saved all year for that camera.
GrahamHorgan 1 year ago
@GrahamHorgan
Try dropping it again!!!!
jaimeone1 1 year ago
my camera always turn white and thers somthing worng with my lens
deadmanwalking3007 1 year ago
somone help my cam droped and the thing at the end will not open and all it shows is black
CANADIANcuber 1 year ago
my camera screen turneddd pitchh white!
& i dont knoe what to do!
tammy159ya 1 year ago
@tammy159ya i have the same problem have u fixed it? give me the solution if you have getting it right
Wili63 1 year ago
You can repair by yourself changing the flat cable, I bought from china for 5 dollars
luckrm62 1 year ago
Thats the same thing that happens to my polariod camcorder!
Busdude97 2 years ago
Can be fixed
MrPrabhakar777 2 years ago
@MrPrabhakar777- I live in Birmingham, Alabama. Do you think there's a repair facility I can send my unit to for repair? any thought on price?
Thanks
TLionelH 2 years ago
Sorry for writing late. I do repair these types of hardware problem. it costs nearly USD 125 including the spare parts provided the problem is due to the connecting strip only ( which is very common). If you wish to repair kindly let me know.
MrPrabhakar777 2 years ago
did anyone figure out how to fix this?
kaestar 2 years ago
check my reply vid
NegativeNick 2 years ago
@kaestar yes you can fix it in USD125. It is because of half broken ribbon between the main unit and LCD panel
MrPrabhakar777 2 years ago
@MrPrabhakar777
Where did you get it fixed? How can I contact the repair person who can solve this? Any direction is appreciated it!
TLH
TLionelH 2 years ago
Where do you live so that I can advise u accordingly?
MrPrabhakar777 2 years ago
My problem is worst,
My mom dropped it and everything works fine.
But there is a huge crack in the screen....
and i can only see half of it.
So when I record, I have to guess...
JABUUTY671 2 years ago
Any solutions to this problem? I have the same problem too and I've only had my SR82 for 2 years.
chrisguapo69 2 years ago
@chrisguapo69 Yes you can fix it in reasonable spending.
MrPrabhakar777 2 years ago
dude. i have the same problem with my dcr sr62!!!
helppp!!!
Bikerboi 2 years ago
pop open the casing u should see a brown slip cable replug that
gamefreakon 2 years ago
i have this problem too,where is the casing?
jakob9595 2 years ago
i have that tooo i knowhow to fix it!!!!!!
gamefreakon 2 years ago
how do you fix it?
NegativeNick 2 years ago