how to make riding mower fast

[michaelsnodgrass18]

did you put a lage one up front

[stlouissux9119]

Better off cutting the belt, measuring the size you need and going to napa and getting a belt. Lol not too good of a racing mower still pretty slow

[TheJuggaloVLOGS]

yes whoop whoop love it

[78945612308690]

zo snel gaat die ook weer niet ik heb een honda die sneller gaat en ik heb er nog niks aan gedaan

[Eddie1962150]

Now if you had just put a larger pulley @ the engine you would go even faster.

[DBsmallengine]

man thays not very fast??

[theatrefreak40]

what was the first pulley size? and the second?

[tyler4248]

does you belt slip

[Jeep8908]

could you just swap pullies so no belt alterations?

[9BeavisandButthead9]

@Jeep8908 on some models u can

[Denkha94]

@9BeavisandButthead9 After you changed the pully how many MPH is it going?

[9BeavisandButthead9]

@Denkha94 15

[codyraab1]

god Max is very smart :D thats what u call good Parenting

[aaronbassist146]

Start 'em young! Great vid! =)



[NicksGarageDoor]

Should have gotten a smaller pulley. My Murray has something like a 7" and Im putting a 2" on the trans

[the1madmechanic]

for that belt tsc is the way to go bro

[MultiFordpower]

my old lawn mower would smoke that bitch and my pulley's were stock just not the motor:)

[craftsman35mph]

that belt shortening idea is genius does it hold up good?

[dougmurraydrumsred]

its not a pully its a shiv just sayin

[rroobbbb1]

i a so doing this to my mower ive already taken off hte deck i never even needed it xD

[coolcat350z]

Aww adorable! Cool vid and great kids. Now if I can my daughter to work a wrench I'd be set!;)

[ZOSOrulz1]

lol almost the same thing i have. mines a murray widebody, 12.5 hp, goes about 20, all i did was put a 2 inch pulley in the back.

[SirSmighty]

The funny thing is max was turning the bolt the right way lol 

[kreigsmann]

this is the cheap way? all you have to do is swap the pulleys. not buy new ones.

[pumkinchunkin]

hey i was wondering what type of wire did you use to sew up the belt and also is it lasting well or do u have to fix it often

[9BeavisandButthead9]

WATCH MY OTHER VIDEO ON MAKING A MOWER FASTER, ITS CHEAPER

[MrKalabama]

Lmao thats no faster than mine and its just an average john deer s82

[9BeavisandButthead9]

@hpsuckz323 yea i was planing on making another vid, cheaper way

[TheAger2]

Hey man u back pulley is up side down, the key hole is on the bottom. And u can't put a belt back together, it' ll never wok

[valeyun]

@TheAger2 umm yes u can lol i did it and its beeen about 3 months now.. nooo problemos and i pop that thing alll the time

[KO1STUD]

Haha dude that thing sucks. All i did is put a 2 and a half inch pully on back (bought a belt) and mine goes 30 mph

[MrOscar6100]

you call that fast? my stock wheelhorse 520-H can lap that

[stevensj13]

I put a 3 incher on mine, hit 35/40

[gregdonahue92]

its a pulley, not a spindle.

[mississippidippers]

Dude iv been looking for a good vid and my dad owns a machine shop so I can make that pulley very easily thank you so much

[stevensj13]

@mississippidippers The pulleys are like 5 bucks dude, it would be a waste of time and cost of materials to make one...

[MrGizmo757]

Why mess up the belt? Cut it to Length and then go up to the auto parts store and get them to Match it. them remember the belt brand and model number for next time. :-)

[NathansBackwoods]

Ive always wanted to do it, I just never get around to it....maybe this year.

[flowmasterish]

its sounded like a damn supercharger when he started it up

[airsoftman20]

cool idea to do that belt sewing thing. i thought the only way was to just get another belt but this is a much better way

[MZEng100]

How does ur clutch work on this thing?

[9BeavisandButthead9]

@MZEng100 thats the thing it doesnt. its like a brake u just let it out slow. its a clutch that stops instead of coasts.

[valeyun]

@9BeavisandButthead9 thats how most of them are.. they have small brake pads on the rear right tire that once you go so far in with the pedal it starts to put pressure on them you can adjust those pads

[royalblue69]

@9BeavisandButthead9 hey is $150 a good price for a mower like that? becuz some one is selling me one like that

[9BeavisandButthead9]

@royalblue69 well i wouldnt pay over 25 but im cheap and i have many resources. if ur gunna use it to mow then its a cheap mower offer him 100 and see if he will budge

[footballstar124]

@dylan1493 wait nvm I rea your comment wrong, your right

[footballstar124]

@dylan1493 no because say if the pulleys were 12 inches and the other is 6. The belt is sending over 12 inches of turn. So the it'll turn twice. If you make it a 3 inch instead, it'll turn 4 times.

[dylan1493]

ya know the smart thing to do is increese the front pully size by whatever you decreesed the back pully size then you dont have to screw with the belt

[MrRussellsteven]

this is alsome i made one but i didnt know how big the pully should be. I thought if the pully was big it would be better but i gues not so im gonna change it tomarrow

[NeeKroVal]

lol i actually think just the redneck belt is wat i need for my mower

[8tyman8]

used the same pully on the engine bore it out on the outher side it is slightly tapperd and put a 3'' on the back and get a A81 v belt and it will fly

[9BeavisandButthead9]

@8tyman8 i want to work on this one more, play with the carb

[8tyman8]

@9BeavisandButthead9 it wont do much playing with the carb .... all i did was put a new throttle shaft in mine works mint and i can shift gears with out pushing in the clutch

[9BeavisandButthead9]

@8tyman8 well i need to hook up a throttle and mess with my clutch

[FPSROCKY]

I think max should have a youtube channel

[holeshotholm417]

Does anyone no where to get a Smaller back pully?

[Inshredible]

max you dumbass unscrew it

[blakelyholley]

how long did that wire trick hold up

[9BeavisandButthead9]

@blakelyholley um i think like an hour

[zlee415]

@9BeavisandButthead9 lol

[fogt1430]

could you get to that pully buy taking out the battery tray under the seat

[9BeavisandButthead9]

@fogt1430 yea

[kushbys1]

YOU SHOLDA LET MACK do his thing hes probly thinken u bastard i was geten that bolt loose!

[123TheHomemade]

you didnt have to take the rear end off you could of took the fenders and back plate off its much easyer

you could of put a belt tensioner on there with the regular belt but thts cool how u made the elt shorter

[123TheHomemade]

you didnt have to take the rear end off you could of took the fenders and back plate off its much easyer

[th19940305]

Is the belt still holding up? And can you do this to a mower that u use for mowing or will it go to fast even on 1st gear to mow

[9BeavisandButthead9]

@th19940305  no but it did last a long time, u could try it on a stock pulley

[th19940305]

Cool, where do you get the new pulley

[9BeavisandButthead9]

@th19940305 local hardware shop, try it