Added: 5 years ago
From: Martianpc
Views: 36,565
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (58)

Sign In or Sign Up now to post a comment!
  • "What are you doing?" If women only knew how much we loved technology!

  • @chickybumlook Yep. So much we even take videos of it :)

  • i'm currently have the RF82, are totally awesome, is worth every penny expend for it.

    i'm also have 4 - RS52 for back and surround, and 2- RT12-D subs, front/rear.

  • I have the RB-81 and The first time I unplugged my sub to listen to them by them self I had to double check to see if I had properly turned off my sub because the crossover on them is down to 45hz. They have great bass reproduction. I also have the RC-10 center rb-10 rear and the Jamo 6510 sub. I have a video on my channel of my old set up I will have a new one by mid of next week of my new klipsch setup

  • i know rotary subs can play that low but out of interest if they tried to make a single cone subwoofer play down to 1hz how big would it have to be?

    i think excursion has to increase x4 every time the octave/hz halves (not sure which one) but lets say the excursion limit is 4 inches (since its a huge sub) and you wanted 100db output, how big would it have to be??

  • "what are you doing?" The female enters man and his curiosities.

  • I wanna see a super basstest. How About "SP - trust nobody VIP"

  • Yes, I just checked that sub out yesterday and I want it! 7500watts if im correct! (One of their subs have that much power, I believe its the signature 25) It even suggests a 240 volt outlet LOL. Insane subwoofer, 9hz would create an inaudible EARTHQUAKE! WOW I CAN FEEL IT ALREADY! =D ! Peanut butter sandwich!

  • what the stupid fuck yo doin ?

  • Be careful lol, I have noticed once you get down to like 10hz, and push too much power to it, the sub doesnt move as much as it should and it cant cool the coil properly and you can burn it up (atleast with cheap speakers this is the case). Nice speakers though! the human ear can only hear from 20khz - 20hz =P so I dont know if your trying to hear a 1hz tone. The lowest ive seen a sub play is the Supercube trinity which goes down to 10hz! insane lol.

  • Paradigm's Signature 25 is rated down to 9 hz.... ugh. pretty crazy either way.

  • u burning coils easily by that

  • we are boys playing with our toys, woman doesn't undertands us, ha ha

  • nice

  • Can't beat the look, feel, overall quality. Boasting clear, clean Tractrix highs, perfectly balanced midrange and tight boomless bass!! The weight of the floorstanders say it all.... solid foundation for superior sound.

    PS--Bang for the buck, they will rival speakers in sound quality twice the price with no problem.

  • and yet ill stick with my z2300 :)

  • Then don't post here. You're insulting Klipsch. ^^

  • lol what are you doing??I miss you, leave that alone and pay attention to me. lol... thx for the video very entertaining.

  • becareful man, low frequncy at the incorect impedance can over heat the vioce coil, but im sure the reciever is doing a good job =p, klipsch are nice!!!

  • does that only happen if the impediance is too high?

  • low sounds doesnt mean more tempereture, its higher towards the middle low at the treble and bass

  • I have one advice for you: if you place the speakers at least 3-4 feet or more from the back walls the you will get more (and accurate) bass! It worked well with my RF-63's!

  • About that.. these were in a dorm room at the time. Not much room placement options.

  • where did you get the sine wave file from?

  • the internet

  • nice! i have the RF-35s (basically the old model of the RF-82s) and have never seen my drivers move that much.... I'm gonna have to try something like this :D

  • You CANT hear 1hz tones. They are below audible range. Second, Klipsch is made in the US. They make bose sound like a vibrating tin can, and be careful, MOST of the ones online are imitations and not actually Klipsch.

  • I don't think thats 1hZ, because I can barely hear sound coming out of the speakers.

  • Humans cant hear below 20 or 15. I think cats or dogs can hear that low.

  • u can its just needs to be sinificantly louder, 20hz is only an average, so it really deends on your ear, but i can as low as 16 when im near a wall

  • You think you can lol. Your most likely hearing a distortion or other present frequency thats above 20. Or maybe you can! =O I dunno! I can only hear high frequencies unto 18.7khz =( Ive blown my ears out with so much loud music through the years..

  • @CharlestonChew03

    I tried with a set of cheap headphones, 8 hz, but it was distortion, and 20khz, but I've given myself some hearing problems working on motorcycles and blowing stuff up.

  • do they sell them in the uk. i want to get some.

  • their from Europe but you can get them in the US 2 i just got mine last week still gotta connect them but those fuckers are load so i had to buy them and heavy ass fuck...worth the money its almost like bose

  • ok thanks. what amplifier are you going to use on them and also what speaker cable?

    Thanks

  • Im gonna use denon avr1708 receiver cost about $999 us dollars im not sure you can get it cheaper.......for the speaker wire im gonna use the one they used on cars just buy a roll from an audio store

  • ok thankyou

  • just did some research u can get it cheaper i got that price from their web site...i got mine for free just for buying the whole set i safe lots of money

  • im not sure i would suggest contacting

    klipsch website or order then online

  • yeah there worth it aswell. how long have you had them?

  • not that long probably a week

    but im getting frustrated cuz my speaker cable asnt arrive and i wanna connect this shit all ready

  • oh right thats pretty annoying then.

  • i finally connect my klipsch speakers n i gotta say wow!!!!!! their fucken bad ass n loud

  • nice ;D are you going to make a video of them in action with it all connected?

  • yeah ill try when i get a chance cuz no one has this series its different then the ones in this video but their pretty cool n sound super bad

  • ohright ok thankyou

  • Hows the bass on them?

  • good, not super deep to where it can shake the house, but accurate and in a well placed area would be sufficient for many uses. work great for most music without a sub, but in movie environment I would recommend a good subwoofer as well.

  • ok, I just wanted to find out more... lol... so I played some rap music and at a fairly good volume (not deafening) I actually felt the punch in my chest from like 6 feet. I guess I didn't give the bass enough credit. I run with huge supplemental sub systems for bass so I don't normally turn off the subs. They are pretty good by themselves though.

  • Look out for those 1Hz sine waves. You won't do any damage to your woofers but you stand a really good chance on frying your tweeters. Capacitors have no impedance to a frequency that low and will send all that current straight to your tweeters. Ask me how I know.

  • I appreciate the heads up... what can I say, young and dumb :-p Fortunately, everything is fine and I still LOVE these speakers. btw, what did you do to yours?

  • A long time ago in my room in my parents house far far away.....I too wanted to watch my woofers go in and out really slow and thought it looked cool until I smelled something burning. I took a sniff of the woofers and they were fine. The tweeter however was not so lucky. After I noticed the strong smell I played some music and the tweeter was significantly softer due to voice coil damage. I then just ran a tweeter test really loud to blow it all the way and smoked it real good.

  • You should be careful with such nice speakers man. 1hz sine could maybe fudge the woofers or the amp. Or both!

  • do you speak french? comment faire bouger le boomer speakers? ampli c est quoi? moi j ai des rf7 elle bouge pas

  • Dude, you need to invest into the older Klipsch Legendary Series floor standing speakers. Run about $1,500 a piece, but they are the best floor standing speakers youll find.

  • What are you doin? lol. Seriously, what are you doin? Klipsch is the shit, but why 1hz? 10hz is great for excursion testing on most speakers.

  • It's a video of a 1 hertz sine wave into a pair of klipsch speakers...

  • yup! its cool too

  • haha.. "wat are u doin?"

  • klipsch is the best. I've never heard the RF series only the synergy. you should make another video with them playing some music or a movie, i wanna see what they can do.

  • klipsch is isnt necessarily the best....but they are very efficient speakers with high sensitivity ratings, typical of horn tweeters. Very metallic, bright and harsh tinny kind of sound.

  • Very interesting Thanks for posting.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more