How to Make a xbox 360 Rapid Fire Controller mod

[TraiinWreckk]

i use a lil red on and off switch makes me feel like a russian behind a mobile missle launcher

[xIUN4G1VENx]

skip to 1:50 if you dont want to watch him take it apart :D

[CALLOFDOOKY]

Can you do it without a button

[HalMartinPhotography]

@CALLOFDOOKY im not sure i have never tried, but anything is possible

[ikody07]

Lol, seriously? I'd quick scope your ass before you could even target me from all the recoil

[MrElmoDouglas]

hello. i have a few questions. for the sodering part do you put the iron on the wire and then gently slide it in? and do you need the soder that comes with the sodering iron, because it comes with soder?

[MrDrift9000]

I have a new controller without the resistor is mine still mod-able?

[HalMartinPhotography]

@MrDrift9000 im not sure, sorry

[NelsonisnotPelson]

where do you get a momentary push button

[HalMartinPhotography]

@NelsonisnotPelson you can get one from any electronics store.

[dahacker14]

do you dolder the red wire right on the 1st player light????

[HalMartinPhotography]

@dahacker14 yep,well thats what i did. But no the light, the metal part on the side of the light

[dahacker14]

@HalMartinPhotography i solder it to much and the led came off looool!!!!

[Jcbasedall]

Can you make a vidio for retards like me this is to much for my small brain ):

[Jcbasedall]

Can you make a controller for non retards this is to much to hadle for my brain );

[MrUnseen10]

can you also solder the second wire to the right prong next to the right joy stick?

[kissingclovers1]

dont be a noob people you will get kicked off xbox live dudes

[HalMartinPhotography]

@kissingclovers1 i said that in at the start ok

[foofenscoops0]

@silentbutthere1 your controller is a newer model unlike the one this guy used in the video. The older circuitry in his controller leaves a fault when you push the button, newer controllers just make the button a "second trigger"

[bRiANxkid]

Can you use any soldering iron?

[MrMegaCodFreak]

xbox controllers are way better than gay stations thumbs up!!!!!!!!!!!!!!!!!!!!

[Legomaster1144]

at 4:25 that beeping scared the crap out of me

[silentbutthere1]

When I push my button it only shoots one bullet any ideas how to fix this

[BMXINGMr]

do you now y my xbox 360 controller keeps shooting but when i push the button it stops

[BL00DYCH4INSAW]

Does this work on black ops?

[sw33tkill3r24]

@BL00DYCH4INSAW probally not, i have a trigger finger and can shoot my pistol that fast

[jesterzj]

I have a c15 controller can it still work?

[HalMartinPhotography]

@jesterzj look as i said before i am not an expert so i don't know if it will work, sorry

[zedmlftw1023]

@halMartinPhotography ok so i did this, it works! but it only shoots at the fastest rate for the M21 and the Barret, the FAL does shoot pretty fast but not at the fastest fire rate, it SOEMTIMES works for the secondary (M9, Deagle, USP, 44.) so if u can help me with any of that and i think WaW has a mod detector or something cuz i test it in Waw and it shoots at full fire rate, then it blocks me, and even if i use my triger finger it dont work, i think WaW is blocked, and it barley works on COD4

[HalMartinPhotography]

@zedmlftw1023 um well i don't really know man, maybe the wiring is loose and the connection isn't solid, thats all i can think of, im not an expert at all with this type of stuff,

[HalMartinPhotography]

@traxguy1 you probs have the wrong type of controller. i said that it works on some and not on others

[ericloveswaffels]

lol those are some stubborn screws

[TyKelly100]

HELP..i have a matrix controller but wen i do it it wont shoot

[HalMartinPhotography]

@TyKelly100 sorry i don't have any experience in those controllers. Hopefull someone else can answer this question.

[TyKelly100]

@HalMartinPhotography never mind i found out the problem and it works now

[HalMartinPhotography]

@TyKelly100 awesome good to hear.

[mommyof4at41]

you cant get banned but in certain games like cod 5 if you make the controller to fast you can get mod blocked but cant get banned

[HalMartinPhotography]

@mommyof4at41 ok well thanks for the info i wasn't sure so i just said that its not my fault if it happens but thanks

[ReDw0lf07]

0:43 mac ftw

[cianw10]

for the one you are making do you puch it once its on then use RT and put it off again by pressing the switch? or basically when you hold down the push button it shoots?

[HalMartinPhotography]

@cianw10 it depends on the switch you use, i am using a momentary push button switch, so that means when i push and hold down on the switch it shoots at a fast rate.

[cianw10]

@HalMartinPhotography ok thanks. so what button would i use so tht i can press it once nd then use RT to fire? because thaats what its like on my rapid fire controller but i bought that one but now i wanna make one myself.

[HalMartinPhotography]

@cianw10 ok im not sure what you mean, these are the buttons you can get.

1. Momentary Push Button switch- means the RT on fires while your finger is on the button, when you take your finger off the RT stops firing.

2. Regular switch- When you push/flick switch RT fires and will continue to fire until you flick/push the switch back to off

Hope this helps

[cianw10]

ive been using my rapid fire mod since when cod4 was all the rage and ive never been banned for it, or heard of anyone being banned for it.

[DZNComradeCJ]

1. Does this still work and 2. do you solder it it that tiny hole under d21 or to the led

[HalMartinPhotography]

@DZNComradeCJ ok 1. this worked on my controller. Some people say it only works on certain controllers. So try at your on risk. 2. i soldered the wire to metal part of the LED. If you look at the LED it has the part where the light comes out and then the metal part on the side, solder it to the metal part on the side of the LED.

Hope this helps and also Thumbs UP so more people can see.

[XxHundredRocketxX]

well i have the same controller and i did exactly wat u said and it never worked

[HalMartinPhotography]

@XxHundredRocketxX oh well idk im not an expert and i did say there is risks, i guess your just the unlucky one

[xEdwardNigmax]

Thanks mate)

[XxHundredRocketxX]

Warning this does not work at all

[HalMartinPhotography]

@XxHundredRocketxX it worked for my controller. you must have a different controller.

[hitmarkersUK]

sure u can get banned...lol i did the 12 volt mod to my xbox and yet i aint got banned so i think the same applys for this tbh its nt a jtag controller so why would they ban u...

[ILoveMormonPussy]

what a piece of shit.

[HalMartinPhotography]

@ILoveMormonPussy thanks

[XxBlackDragX]

Can't you use conductive glue like wire glue?

[HalMartinPhotography]

@XxBlackDragX that is probably a really smart idea, that way you won't burn and wreck you circuit bored if you stuff up. But......i didn't know at the time and it still worked.

[rolicolopon]

i can shoot that afst without a mod..wtf. but i cant aim werth a dern

[HalMartinPhotography]

@rolicolopon nice sort of a achievement now just try and aim while doing it.

[ben32295]

can you use this for WAW?

[HalMartinPhotography]

@ben32295 im not sure i have never tried but im sure you could.

[gekoman227]

Song?

[HalMartinPhotography]

@gekoman227 the song is - water by The Beautiful Girls

[dealio1224]

are you using a head cam??

[HalMartinPhotography]

@dealio1224 yes its a go pro head cam

[dealio1224]

trouble with scres much haha. nice tutorial man:)

[badboycris]

nice video

[HalMartinPhotography]

@badboycris thnx

[PlanB9741]

SONG NAME NOW

[HalMartinPhotography]

@PlanB9741 - the song is - water by The Beautiful Girls

[PlanB9741]

@HalMartinPhotography thx man

[HalMartinPhotography]

@EvansAutoShop um well not really if you did exactly what i did it should work but um maybe its the button, try use a "momentary push button" see if you can buy one of them, as they work the best, im not an expert at all so i don't really know, i wanted to try this mod and thought i should film it, but yeah just try that and hopefully someone with more knowledge on this matter will reply to your comment.

keep trying though

[Eliminater12]

he used speaker wire

[HalMartinPhotography]

@Eliminater12 yeah thats what it is thank i forgot what wire it was

[Freakyfizer19]

what type of wire did u use

[HalMartinPhotography]

@Freakyfizer19 ok well i used red and black wire, doesn't matter i think it was about 1-2 mm thick, but the thicker the better, good luck

[Freakyfizer19]

Does anyone know the exact wrie he used... red and black wire what size???

[HalMartinPhotography]

@Freakyfizer19 well im not sure i just used any wire i found lieing around haha

[TheNiallMc1]

@This @is @all @blue

[yosep801]

Sometimes I'd seen videos like this not to do it but just to watch it. Thumbs up.....please(if you want too).

[HalMartinPhotography]

@yosep801 what do you mean cos i don't get what your saying?

[yosep801]

@HalMartinPhotography Well.....sometimes my comment doesn't make sense.But what I mean is that I see videos how to mod controller, how to make computer run faster, etc not to try it but just to watch it.

[HalMartinPhotography]

@yosep801 ok yeah i get it, im not saying don't try it im just say do it on your own terms, cos people try it then they break there stuff and blame me, just a pre-cautionary requirement

[Freakyfizer19]

@yosep801 hey i need help what wire did u use



[yosep801]

@Freakyfizer19 Hey don't ask me! I didn't make the video!

[TheNiallMc1]

@HalMartinPhotography reply's to @yosep801 he means he just watches the video he dosent make the mod

[MrOmega227]

So I solder the wire to the bottom of the LED? Not on the circuit board?

[HalMartinPhotography]

@MrOmega227 yeah i think so, but soldier it to the metal part of the LED like to the side of it, and also if u hold the iron on for too long it will wreck your circuit board

[1torex1]

@HalMartinPhotography 2:!2 dropped ur screwdriver too lol

[kc88kc]

dude you want a capture card ill sell you mine for like 15 i bought it on amazon for 20 idk if your intereseted

[HalMartinPhotography]

@kc88kc idk where do you live?

[kc88kc]

@kc88kc in nampa idaho i just dont use my capture card anymore i gave the my last capture card to a goo friend on youtube and got this one and dont use no more

[HalMartinPhotography]

@kc88kc well i live in australia so the shipping wouldn't be worth it, but thanks anyway

[kc88kc]

@HalMartinPhotography yeh lool

[1torex1]

@HalMartinPhotography lol had some trouble with them screws XD

[kc88kc]

@kc88kc yeh lol 

[Ranger9231]

lol