they have been building the honda si coupe since 1993 in canada. mind you that is not the dohc that produced 160hp. that was sohc producing 125hp area.
spoon is way to over priced for what it is stick to companies like skunk2 and buddy club there the companies to go with if ur tuning a honda ive used nothing but skunk2 and had not one problem at all
.... in Canada, from 1992-1995 you could get the Si in a hatchback OR a coupe. In the states between 1992-1995 you could get only the Si hatchback, and the coupe was the Ex. Canadian models were different. I am aware they didn't make the SiR (Or USDM Si) until 1999.. as I own an EM1 now.
I know many think its "cool" to paint your engine, but really there is no point. Just makes it more attractive to others to steal it.
My philosophy? Keep it looking stock, as much as possible, even if it looks "bad", that way, less likely for some Mexican to want to steal it. But, you got some legit parts, so I cant hate too much XD
Unfortunately I never saw the dyno. I have a 2.0L sleeved block on order so I'm waiting til I have the new new engine built.. hehe I'm an engine whore.
It was the same motor, but it got rebuilt with FORGED pistons and rods for more boost and higher rpms. HOWEVER, I have ordered a 2.0L block with forged sleeves, and will am in the process of building a 100% new motor that I'm hoping to hit 600 - 650whp with. Stay tuned as always...
what did you use to get that new look on the block when you repainted it
Spool24 3 months ago
they have been building the honda si coupe since 1993 in canada. mind you that is not the dohc that produced 160hp. that was sohc producing 125hp area.
Mabouya1378 7 months ago in playlist Honda vidz
dam how much did you spend doing all this? looking amazing!
dengitpeter1 10 months ago
how much did this cost ?
gnscy 10 months ago
Beautiful. I love a non-rice civic!
jordy0208 1 year ago
a bro what rims are those ???
teggyguy1 1 year ago
how much was the engine build with turbo and all?
elsacko1 1 year ago
how much was the build?
elsacko1 1 year ago
dude that is a damn nice ej1 and a few qustions what color is that i like that blue what you use to paint your rims ?or did you have some one do it
Shane765 1 year ago
How do you put the PVC valve ont the block ?
importornothing 1 year ago
i wish i could get an eg civic but in jersey and new york for me its hard to find one cheap stock and single owner not even bare shell.
xstr33tr4cerx 1 year ago
What's the name of that song and those weels are squeky clean
importornothing 1 year ago
gay music
bustedpiggybank 1 year ago
NICE
erick808100 1 year ago
clean EJ1
rickboy89 1 year ago
sale it this car ?
asturiuhonda 2 years ago
spoon is way to over priced for what it is stick to companies like skunk2 and buddy club there the companies to go with if ur tuning a honda ive used nothing but skunk2 and had not one problem at all
lilcow418 2 years ago
ya but its priced that high becasue they are better parts
laranja999 2 years ago
i know they make a 92-95 civic hatch si because i have one and it comes with a d16z6 sohc but i dont know that they had a coupe
Boosted95si 2 years ago
i know that they make 92-95 si but its a hatchback. not coupe. in canada they have sir.
99integragsrRMPB 2 years ago
.... in Canada, from 1992-1995 you could get the Si in a hatchback OR a coupe. In the states between 1992-1995 you could get only the Si hatchback, and the coupe was the Ex. Canadian models were different. I am aware they didn't make the SiR (Or USDM Si) until 1999.. as I own an EM1 now.
faithone06 2 years ago
@faithone06 ... i didn't know that. cool. i also own a EM1 electron blue.
99integragsrRMPB 2 years ago
@faithone06 no the coupe in use can be si too fool i've seen it could be from japan but it was left side drive and said si
xstr33tr4cerx 1 year ago
nice car man. but a the end u said that it was a civic si? honda didn't make civic si coupes untill 99. just thought that i let u know. lol
99integragsrRMPB 2 years ago
I just thought I'd let you know the Si coupe was in Canada since 1992 ;) It was the EX in the states, if that helps..
faithone06 2 years ago 2
sick ej man! nice work!
taylorromeo 2 years ago
Beast ride
mina00009999 2 years ago
Finally, a legitimate non-rice honda. Good job man, have fun.
tverrochi 2 years ago 8
nice and clean work mate....how much hp???
fd2mugenRR1 2 years ago
Right on JDM brother, sick ass civic man
Wannabe000 2 years ago
Nice , I like those RC injectors :D I have RC 350CC they are so easy to install.
Gqgangsterz10 2 years ago
Spoon.... That's some expensive gear there sir!
I know many think its "cool" to paint your engine, but really there is no point. Just makes it more attractive to others to steal it.
My philosophy? Keep it looking stock, as much as possible, even if it looks "bad", that way, less likely for some Mexican to want to steal it. But, you got some legit parts, so I cant hate too much XD
bastec666 2 years ago
Psh I build my car for me man, I can't live my life in fear of thieves.
faithone06 2 years ago 7
hell yeah dude....i think i like ur "philosophy" better......lol
hectorjrgon 2 years ago
OH AND THE SONG BRO COME ON
lilolover86 2 years ago
what s up wit the white rims you ask guy on the bottom?
its fucking JDM!
lilolover86 2 years ago
Real nice build, but waz up with the white rims?
Shiznit426 2 years ago
white rims look sick man.
1989targatop 2 years ago
damm shit is klean man nice coupe same setup i got in my civic ...
genocide209 2 years ago
cant make a vid of the turbo installation??? or anyone knows any vids that might help??? thanx...
kiloandyeyo 2 years ago
Sick OBD-1 Keep up da nice work hope to see that 2.0 installed and running good i would like to know what it runs at the track "maybe next video"?
jointsthemonkey 2 years ago
i love that blue color..anyone know colore code?
retrogazele 2 years ago
It's Subaru World Rally Blue.. think STi Impreza.. there you go ;)
faithone06 2 years ago
he use to have a b16 in it check the other videos out
gt40turbocivics 2 years ago
Nope.. its always been LSVTEC. Just a b16 head. 1.8L block. However.. I just ordered a Golden Eagle 2.0L SLEEVED block ;) Stay tuned for big power
faithone06 2 years ago
nice little build you got going on there.. u get it running or on the dyno yet
lindseyhunt1090 2 years ago
Unfortunately I never saw the dyno. I have a 2.0L sleeved block on order so I'm waiting til I have the new new engine built.. hehe I'm an engine whore.
faithone06 2 years ago
This has been flagged as spam show
how did you get the motor to shine so hard? did you polished it or painted it?
SKYLITEJDM 2 years ago
how did you get the motor to shine so hard? did you polished it or painted it?
SKYLITEJDM 2 years ago
Looks awesome, but i think you need spacers for the back.
explodingsomepie 2 years ago
nice man
congrats for the ride (:
csfreack 2 years ago
wait, so did you get a new motor or is that the first motor you put in?
kaoskidFF127 2 years ago
I was wondering that too.. im pretty sure its the same one.. why would he get two new ones.. lol Unless this dude shits money.. lol
Park0ur4life 2 years ago
It was the same motor, but it got rebuilt with FORGED pistons and rods for more boost and higher rpms. HOWEVER, I have ordered a 2.0L block with forged sleeves, and will am in the process of building a 100% new motor that I'm hoping to hit 600 - 650whp with. Stay tuned as always...
faithone06 2 years ago
nice video..
jmorcivic 2 years ago 2