any ideas. this is what i've done. rsd5.4. bsf 2.3.3.4. factory reset/wipe data. and this is where i'm at. man i'm stuck on the start up at the motorola sign.....
i upgraded to gingerbread and then i did this to downgrade it to fryo and now my phone is stuck on bootloader 30.04 and idead how to fix this or should i smash my droid and get a replacement
If I enter download mode (just to test; my bootloader can glitch), will it erase everything? If I don't SBF, that is. Just entering download mode, then powering off.
i tried installing the crt effect and it said voice command was crashing so i did know how to reset it so i used the D2bootstrap to reset it and now when i turn on the phone it goes straight to the d2bootstrap and it doesnt boot up
please help me what do i do? Do i use this method in this video?
what i mean by it doesnt boot up is that i use the D2bootstrap to reboot it
then ifigured out how to use the phones reset by holding down the power and home then press the volume buttons and i reset it but it stil takes me to the bootstrap menu
i've used this method before to sbf back to froyo so i could install apex but this time i was sbf'ing back so i could put it on the stock verizon gingerbread build and it said "execution failed" and on the phone it wont do anything but show the bootloader screen and it says "code corrupt" any suggestions? please respond quickly!!!
The factory reset option will not come up when I press the search button after the android robot with the triangle is on the screen. The phone is in a constant boot loop is there any other way to factory wipe the data?
I agree, the factory reset / data wipe is important! I SBF'd and when the phone loaded up, it was really slow, there were some error messages and then it froze... and I couldn't do anything! I SBF'd again thinking something had gone wrong-- there was nothing but a blank screen... the notification pane was able to be pulled down but other than that it was blank!!! I watched this video and remembered I hadn't done a data wipe!!! After the data wipe, everything was clean, fresh and back to normal!!
ok thank you, i was afraid if i sbf'd the phone it wouldn't be my carrier. would you by anychance know how to get back to my stock froyo? i tried to restore my phone before i flashed gingerbread and it just gets stuck on the red logo
@shawnmurphy7 if it grts stuck on ted logo try pulling battery... then boot into stock recovery (home+power) when droid comes up press (volumeup+down) to bring up menu then select "wipedata/factory reset
i'm using a gingerbread rom and my carrier is a 3rd party carrier called bluegrass cellular. would this still work to sbf from gingerbread back to froyo?
Do you have to wipe data if u want to do this then upgrade to pre-rooted gingerbread? Also if u dont delete data will your apps or any contacts be deleted at all?
@peyton61492 youll only need to wipe data if you bootloop, if you dont wipe data, yes your apps, and contacts and such will still be gone, as this sets phone to out of the box factory settings
I followed all this to a T so I thought, right after getting Finish on RSD Lite, I hold HOME and Power and then keep holding home, but I never get the triangle and exclamation mark screen to come up. ANY help on this would be great. THANKS
If the search button is not working on your droid x during maintenance mode, push the two volume buttoms together. This will do the same function as the search. Use the power button to select factory reset instead of camera
im sorry..i mind my dx is stock in the safe mode ,that cant let me use any android application..and i cant disable from it...im looking to get out of this mode..i already do this sbf, but my device just not appear in the rsd lite window...what can i do???
@eldaflo0727 be sure you are in bootloader mode and plug phone into pc... if it still doesnt recognize it grab the usb drivers, google dx usb drivers, if pc still wont recognize it, try a new pc
I put my phone in bootloader but i was unable to start ds lite after i opened it there was no way for me to press the start button i followed your instructions explicitly
ok it see my phone but the sbf file doesnt show up.. I CANT HIT THE START button.. .what am i missing. i downloaded the two files you gave us... my phone is connected.
ok you saved my phone the only thing that was popping up was the Motorola symbol i already gave up and started using a different phone but now i can use it again
I can forever keep doing this to get in to some of the CM7 roms right? I use to follow and do everything but i got lost after losing phone but got my Dx back gonna get back in to the game. Another quick Q i need root to have the CM7 roms?
@DroidModd3rX ok i have a good one for you. my dx is stuck in boot loot droid peeing on a apple i have tryd rsd lite .7 .8 .9 my 64bit vista sees my phone but not the sbf file. ive tryd all usb ports ive put file to sd card renamed it to update.zip. can ya gimme any advice?
Do you have to wipe your phone after you fbf back if gbe phone was only rooted? No custom roms at all. I just don't want the new update, I want it back to the older version that was easily z4 rooted.
I got the OTA Gingerbread update and lost Root Access. Can I SBF back, even if I deleted a lot of the original Bloat-wear from the phone. I want to download the Gingerbread rom with WI-Fi teather built in.
Hey thanks for the informative video. When I run RSD Lite my phone never shows up on the list. I've tried to re do the steps you've laid out up to that point but still nothing. Any ideas? Thanks in advance.
Thanks for the tutorial! I was caught in a boot loop running liberty 2.0.1, and now i'm up and running again! Which app do you recommend to reload my last known good rom, if i end up in another boot loop without having to flash vzw motorola rom again..
also when i boot into stock recovery, does the wipedata/factoryreset option erase everything on your phone and sd card? (contacts, apps, pictures, etc.)
JLonsinger.. you need to boot into stock recovery (power+home) when android guy comes up hit search button (if on froyo) or volumeup+down (if on gb) to bring up menu then select "wipedata/factoryreset
I have same issue as TGreezy in which RSD Lite does not show my device, I have Moto drivers installed, SBF File does not download when push start can u get ur files ....
Im following what you did, but when i open RSDLITE it doesnt show my phone?! i have droid 2. but droid 2 and X are the same somewheat right please respond even though im dumb :)
agcz... you can not sbf your phone from settings.. you can factory reset...besides if your phone was bricked you wouldnt really be able to access settings... this is really for those who have modified their phone and accidently bricked it or for those who want to downgrade from gingerbread back to froyo
Thought mine was too far gone, but this SBF brought it back! And regarding the PC not finding your pone...go into the Config settings and click on "first-come-first-seved" in the devceID tab. Can`t vouch for everyone, but it worked like a champ for me.
Wait do I have to be on 2.3 to do this...help ne plz I did this and it says there's no update I can't update to 2.3.... the only thing I did wrong was when it was rebooting I disconnected early like at 20%
Can I do this if my bootloader is 30.04? I need to sbf my phone cause I can't install the OTA update to GB... It fails everytime it starts to extract the files and load it on
YOU ARE THE BEST!!!! I GOT IT FIXED!!!! I JUST FOLLOWED YOUR STEPS LIKE IN THE VIDEO! NOTHING ELSE! THANKS MAN! ALSO I THINK ITS COOL HOW YOU REPLY TO ALL OF US THANKS!THANKS!THANKS!
great video i wish the quality was better tho but works im downloading it now.
prranit 1 day ago
i can't download the sbf for some reason. can anyone help?
snolidsteak 3 days ago
Thank you very much! Very helpful and super easy! Great video
MrUmagooma 5 days ago
@SuperDrewness did you watch yhe video? Im prettu sure that was explained :)
DroidModd3rX 1 week ago
Ok the problem was I didn't have the drivers. Make sure you put in the description that you need the drivers for your PC
SuperDrewness 1 week ago
I did everything you did except my device (DROID X) wasn't showing up on RSD lite
SuperDrewness 1 week ago
ive downloaded a rom and now it;s in a boot loop
MrLucadrag 1 week ago
@MrLucadrag try wiping data in stock recovery.. or flash the sbf
DroidModd3rX 1 week ago
Try flashing again...try wiping data in stock recovery
DroidModd3rX 2 weeks ago
any ideas. this is what i've done. rsd5.4. bsf 2.3.3.4. factory reset/wipe data. and this is where i'm at. man i'm stuck on the start up at the motorola sign.....
wonggallant 2 weeks ago
@ DroidModd3rX
Does SBF delete all apps including the droid2 bootstrap app?
jalisco1467 2 weeks ago
Great vid
erichw23 3 weeks ago
worked fine , went back to bone stock. now when i connect my usb cable the bootloader screen stays on. any ideas on how to resolve this problem???
davewu954 4 weeks ago
What does SBF stand for?
pengu5981 1 month ago
i love you please have sex with me
r1kn0kr 1 month ago
I had to install the motorola usb driver before rsd lite would recognize the device.
devinethang 1 month ago
i upgraded to gingerbread and then i did this to downgrade it to fryo and now my phone is stuck on bootloader 30.04 and idead how to fix this or should i smash my droid and get a replacement
Blaz702 1 month ago in playlist Favorite videos
@Blaz702 I'd try a reflash
DroidModd3rX 1 month ago
If I enter download mode (just to test; my bootloader can glitch), will it erase everything? If I don't SBF, that is. Just entering download mode, then powering off.
HeedleBlambeedle 1 month ago
i tried installing the crt effect and it said voice command was crashing so i did know how to reset it so i used the D2bootstrap to reset it and now when i turn on the phone it goes straight to the d2bootstrap and it doesnt boot up
please help me what do i do? Do i use this method in this video?
drivenbyponies 2 months ago
@drivenbyponies Doesnt*
what i mean by it doesnt boot up is that i use the D2bootstrap to reboot it
then ifigured out how to use the phones reset by holding down the power and home then press the volume buttons and i reset it but it stil takes me to the bootstrap menu
drivenbyponies 2 months ago
I love you.....
shot664 2 months ago
When you download 2.3.340 SBF file and click the file, is it supposed to not find the file?
medina2871 2 months ago
god this just saved my ass..
bruinbaseball12 2 months ago
nothing happens when i press search button.. The menu wont pop up
starrett67 2 months ago
will this work if i have liberty3?
Aznboi986 2 months ago
Comment removed
androiduser1234 2 months ago
i've used this method before to sbf back to froyo so i could install apex but this time i was sbf'ing back so i could put it on the stock verizon gingerbread build and it said "execution failed" and on the phone it wont do anything but show the bootloader screen and it says "code corrupt" any suggestions? please respond quickly!!!
androiduser1234 2 months ago
@androiduser1234 redownload the file
DroidModd3rX 2 months ago
@baijusharda95 that's correct you wont be charged.. I've reactivated my phone more times than I can count
DroidModd3rX 3 months ago
I shouldn't have a problem with Verizon charging me because I reactivated right?
Baijusharda95 3 months ago
The factory reset option will not come up when I press the search button after the android robot with the triangle is on the screen. The phone is in a constant boot loop is there any other way to factory wipe the data?
Darkphoenix2002 3 months ago
I agree, the factory reset / data wipe is important! I SBF'd and when the phone loaded up, it was really slow, there were some error messages and then it froze... and I couldn't do anything! I SBF'd again thinking something had gone wrong-- there was nothing but a blank screen... the notification pane was able to be pulled down but other than that it was blank!!! I watched this video and remembered I hadn't done a data wipe!!! After the data wipe, everything was clean, fresh and back to normal!!
amarantiafay 3 months ago
On boot loader 30.04
davidservin6854 3 months ago
Will this work on my Droid x it was running Ginger bread 2.3.5, currently running miui 1.9.23
davidservin6854 3 months ago
@davidservin6854 yes it will work
DroidModd3rX 3 months ago
I bought a droid from a friend, he switched to metro pcs and they flashed it, can I flash it back to verizon?
chumpita2184 3 months ago
THANK YOU VEYY MUCH MAN VERY HELPFUL IM SUBSCRIBING!!!!!!!!!!!!!!!!
petergriffen818 3 months ago
i cant tell if i have 80% or more cuz i cant even get to the menu. and will this work on a droid 2 ?
Xx2Dirty4YouxX 3 months ago
WIll this work on droid 2 ?
Xx2Dirty4YouxX 3 months ago
RSD shows my droid x connected but i can't press the start button.
should i reinstall usb drivers? please help !!!!
MrOne2watch 3 months ago
ok thank you, i was afraid if i sbf'd the phone it wouldn't be my carrier. would you by anychance know how to get back to my stock froyo? i tried to restore my phone before i flashed gingerbread and it just gets stuck on the red logo
shawnmurphy7 4 months ago
@shawnmurphy7 if it grts stuck on ted logo try pulling battery... then boot into stock recovery (home+power) when droid comes up press (volumeup+down) to bring up menu then select "wipedata/factory reset
DroidModd3rX 4 months ago
i'm using a gingerbread rom and my carrier is a 3rd party carrier called bluegrass cellular. would this still work to sbf from gingerbread back to froyo?
shawnmurphy7 4 months ago
@shawnmurphy7 i believe its specific to verizon
DroidModd3rX 4 months ago
and like, even after a factory reset, it still has the same custom boot logo i had installed prior to the device becoming bricked :/
PartyBoiiSwag 4 months ago
my computer doesn't read my droid x and theres no option to select it on rsd lite :(
PartyBoiiSwag 4 months ago
@PartyBoiiSwag install the motorola usb drivers to your pc just google droidx usb drivers... if ghat doesnt work try a different pc
DroidModd3rX 4 months ago
What if you cant get your phone to pick up on RSD lite? It wont show my phone as a device.
peyton61492 4 months ago
@peyton61492 install usb drivers.. if that doesnt work try snother pc
DroidModd3rX 4 months ago
@DroidModd3rX Ok I installed the drivers and got it to work! Thanks so much!
peyton61492 4 months ago
Do you have to wipe data if u want to do this then upgrade to pre-rooted gingerbread? Also if u dont delete data will your apps or any contacts be deleted at all?
peyton61492 4 months ago
@peyton61492 youll only need to wipe data if you bootloop, if you dont wipe data, yes your apps, and contacts and such will still be gone, as this sets phone to out of the box factory settings
DroidModd3rX 4 months ago
I followed all this to a T so I thought, right after getting Finish on RSD Lite, I hold HOME and Power and then keep holding home, but I never get the triangle and exclamation mark screen to come up. ANY help on this would be great. THANKS
jtlogiks 4 months ago
@soXratys The answer is yes.. all traces of root will be gone, just make sure to erase any mischievous stuff from the Sdcard :)
DroidModd3rX 4 months ago
ive used this twice and it worked the first time but now the second time its still stuck in a bootloop.. PLEASE HELP!!!!!!!!!!!!
tttttb11 4 months ago
@tttttb11 wipedata in stock recovery
DroidModd3rX 4 months ago
The RSD lite is telling me to please manually power up this phone after everything is completed. What does this mean?
NiztheKid 4 months ago
@NiztheKid power up the phone :)
DroidModd3rX 4 months ago
If the search button is not working on your droid x during maintenance mode, push the two volume buttoms together. This will do the same function as the search. Use the power button to select factory reset instead of camera
MrWallyrock 4 months ago
This has been flagged as spam show
Check out this: goo.gl\8ONjl if you want to win iPad 2.
jertudiopa 4 months ago
I FUCKING LOVE YOU MAN THANK YOU SO MUCH YOU SAVED MY LIFE THANK YOU!!!!!!!!!
keiforbes 4 months ago
im sorry..i mind my dx is stock in the safe mode ,that cant let me use any android application..and i cant disable from it...im looking to get out of this mode..i already do this sbf, but my device just not appear in the rsd lite window...what can i do???
eldaflo0727 4 months ago
@eldaflo0727 be sure you are in bootloader mode and plug phone into pc... if it still doesnt recognize it grab the usb drivers, google dx usb drivers, if pc still wont recognize it, try a new pc
DroidModd3rX 4 months ago
Arkarian... make sure you have the usb drivers installed... if it still doesnt work try a different computer
DroidModd3rX 4 months ago
I put my phone in bootloader but i was unable to start ds lite after i opened it there was no way for me to press the start button i followed your instructions explicitly
Arkarian2 4 months ago
Elda... you should be in bootloader mode on dx
DroidModd3rX 5 months ago
This has been flagged as spam show
it is safe to do this to my dx is is in safe mode???
eldaflo0727 5 months ago
it is safe to do this to my dx is is in safe mode???
eldaflo0727 5 months ago
you just got a new subscriber
ip0dhacker007 5 months ago
saved my ass here...thought i ruined my DX i just bought. thanks alot!!
cltholen 6 months ago
Danumber.. be sure to unzip the sbd file
DroidModd3rX 6 months ago
ok it see my phone but the sbf file doesnt show up.. I CANT HIT THE START button.. .what am i missing. i downloaded the two files you gave us... my phone is connected.
danumber2 6 months ago
ok you saved my phone the only thing that was popping up was the Motorola symbol i already gave up and started using a different phone but now i can use it again
bcaplan94 6 months ago
@jonesaaron88. If you're still bricked you're doing something wrong.
spikeman23 6 months ago
Thanx for all da help n scripts
unknownable1984 6 months ago
ok i tried everything you did. and its still bricked
jonesaaron88 6 months ago
Ok in the begining where you use plug your phone in and hit start is that a program?
jonesaaron88 6 months ago
so if i cant omgbdx do the all root for motorolas?
Lokes1890 6 months ago
lokes... yes but cm7 is coming to gingerbread this weekend! so you may want to get on rooted .602
DroidModd3rX 6 months ago
I can forever keep doing this to get in to some of the CM7 roms right? I use to follow and do everything but i got lost after losing phone but got my Dx back gonna get back in to the game. Another quick Q i need root to have the CM7 roms?
Lokes1890 6 months ago
unknownable... yes it will, but it will sbf you back to 2.2
DroidModd3rX 6 months ago
unknownable... yes it will
DroidModd3rX 6 months ago
Will the sbf file work on the Ota gb 2.3.3?
unknownable1984 6 months ago
ok that is strange... you had your phone in bootloader
mode? and the sbf file was unziped?
DroidModd3rX 6 months ago
When I try to do it, it fails and says not enough image files created
PutridDeathCow 6 months ago
Godffits... boot into stock recovery and wipedata/factoryreset
DroidModd3rX 6 months ago
Everytime my phone turns on the motorola emblem comes on and doesn't shut. I was trying to install arom and some how I screwed up. PLEASE HELP!!!
godffits 6 months ago
7daron7 are you on a win7 machine... if so try win xp or vista.. sometimes RSDlite doesnt play well with win7
DroidModd3rX 6 months ago
RSD program doesn't recognize my DX. I have drivers installed and I can navigate to it, copy files/pictures off it, etc.
I can load the spf file fine, I just can't see my device. any advice?
7daron7 6 months ago
Emajin...make sure to unzip the sbf file
DroidModd3rX 6 months ago
TYSM
Abobbination 6 months ago
Lax...make sure to unzip the sbf file
DroidModd3rX 7 months ago
@DroidModd3rX ok i have a good one for you. my dx is stuck in boot loot droid peeing on a apple i have tryd rsd lite .7 .8 .9 my 64bit vista sees my phone but not the sbf file. ive tryd all usb ports ive put file to sd card renamed it to update.zip. can ya gimme any advice?
emajin123 6 months ago
dude it keeps telling me flashing process failed please help me!!!!!!!!
LaxHockey47 7 months ago
Do you have to wipe your phone after you fbf back if gbe phone was only rooted? No custom roms at all. I just don't want the new update, I want it back to the older version that was easily z4 rooted.
atrix4g4me 7 months ago
Jorge...Motorola USB drivers so computer can see your phone...and yes you must have the sbf file to sbd your phone
DroidModd3rX 7 months ago
do i realy need the full 2.3.340 sbf thngy?? for some reason my computer doesnt want to download it
jorgeSAW1 7 months ago
wat are moto drivers??
do i really
jorgeSAW1 7 months ago
wat are moto drivers??
jorgeSAW1 7 months ago
carlos make sure you have installed the moto drivers... if that doesnt work try another computer...also make sure the phone is in bootloader mode
DroidModd3rX 7 months ago
My device is not showing up on the list after I select the SBF file. What now?
carloscs5 7 months ago
Sbs...u can sbf back to froyo...I'd suggest checking out the new miui
DroidModd3rX 7 months ago
I got the OTA Gingerbread update and lost Root Access. Can I SBF back, even if I deleted a lot of the original Bloat-wear from the phone. I want to download the Gingerbread rom with WI-Fi teather built in.
sbs9026 7 months ago
Jkherb... make sure to install the motor drivers
DroidModd3rX 7 months ago
Hey thanks for the informative video. When I run RSD Lite my phone never shows up on the list. I've tried to re do the steps you've laid out up to that point but still nothing. Any ideas? Thanks in advance.
jkherberger 7 months ago
Thank you...
PWS112680 7 months ago
Worked perfect! back to stock and received ota update gingerbread and can now watch Netflix!
carpenterty 7 months ago
Does this work for the HTC g2?
SlayvaSlayva 7 months ago
Prozac... just make a nandroid backup in clockworkrecovery
DroidModd3rX 7 months ago
Thanks for the tutorial! I was caught in a boot loop running liberty 2.0.1, and now i'm up and running again! Which app do you recommend to reload my last known good rom, if i end up in another boot loop without having to flash vzw motorola rom again..
Thanks again!
Prozaac4me 7 months ago
OMFG this guy has 4 arms
PiNoYxDeVl 7 months ago
Ok, so i got it to ready my phone but it told me it Failed (0x7199)
Craigslistgoon 7 months ago
Hey The RSD Lite isnt showing my device. HELP PLZ. My phone wont go pass the Motorola Logo
Craigslistgoon 7 months ago
SwitcFlitchflip if its on your sdcard then no you wont loose it,
DroidModd3rX 7 months ago
Nope...just phone data
DroidModd3rX 8 months ago
also when i boot into stock recovery, does the wipedata/factoryreset option erase everything on your phone and sd card? (contacts, apps, pictures, etc.)
hamhusky 8 months ago
Remember to wipedsta in stock recovery
DroidModd3rX 8 months ago
can i use RSD Lite 4.9? because i tried it in 4.9 and now my phone is stuck in a boot loop.
hamhusky 8 months ago
can you help me
ksheaffer31 8 months ago
how do use winrar
ksheaffer31 8 months ago
i just download the sbf file to my c drive and then select it in the rsd. then i select my phone and click start and then get a failure
ksheaffer31 8 months ago
fingster
ksheaffer31 8 months ago
Make sure its unzipped...use winrar.. or winzip
DroidModd3rX 8 months ago
i dont think so i downloaded it right from your link
ksheaffer31 8 months ago
Is the sbf file unzipped?
DroidModd3rX 8 months ago
This has been flagged as spam show
i got my device to show and sellected the sbf file but when i go to start i get a failure. how do i get it to run?
ksheaffer31 8 months ago
i got my device to show and sellected the sbf file but when i go to start i get a failure. how do i get it to run?
ksheaffer31 8 months ago
i got my device to show and sellected the sbf file but when i go to start i get a failure. how do i get it to run?
ksheaffer31 8 months ago
JLonsinger.. you need to boot into stock recovery (power+home) when android guy comes up hit search button (if on froyo) or volumeup+down (if on gb) to bring up menu then select "wipedata/factoryreset
DroidModd3rX 8 months ago
PS this SBF has worked before.
JLonsinger2011 8 months ago
I was on Liberty Mod, then when i was flashing another rom it started bootloop. I SBFd it, now im still on the liberty boot screen, bootlooping.
JLonsinger2011 8 months ago
Esa....its not the files...they work for me and several thousand others try using a different pc
DroidModd3rX 8 months ago
I have same issue as TGreezy in which RSD Lite does not show my device, I have Moto drivers installed, SBF File does not download when push start can u get ur files ....
esadrean 8 months ago
well i dont know that this works on d2 but you would need to make sure you had the moto drivers
DroidModd3rX 8 months ago
Im following what you did, but when i open RSDLITE it doesnt show my phone?! i have droid 2. but droid 2 and X are the same somewheat right please respond even though im dumb :)
Tgreezy94 8 months ago
agcz... you can not sbf your phone from settings.. you can factory reset...besides if your phone was bricked you wouldnt really be able to access settings... this is really for those who have modified their phone and accidently bricked it or for those who want to downgrade from gingerbread back to froyo
DroidModd3rX 8 months ago
Why would I do this when I could just do it from settings
agcz347 8 months ago
ok it sounds like your sbf file was incomplete, what version were you you may want to try a different version sbf file
DroidModd3rX 8 months ago
HELP.....i followed the video and RSD progress bars says error and on my droid x screen says code corrupt???
ortiz750ss 8 months ago
Thought mine was too far gone, but this SBF brought it back! And regarding the PC not finding your pone...go into the Config settings and click on "first-come-first-seved" in the devceID tab. Can`t vouch for everyone, but it worked like a champ for me.
JeffB2874 8 months ago
*pHone, for those who might nitpick*
Oh, and seRved. Damn laptop keyboard is crapping out LOL.
JeffB2874 8 months ago
A can u Show me How To Rest My LG Ally Its Lock And i Cant UnLock IS there a way That i Can Rest it
>>>>>>>>>>>>>>>>>.Replay Me A Message>>>>>>>>>
WeedSmoke100 8 months ago
Comment removed
VenomAndBlackIce 8 months ago
Comment removed
VenomAndBlackIce 8 months ago
Comment removed
VenomAndBlackIce 8 months ago
Comment removed
VenomAndBlackIce 8 months ago
Venom try volume up and down
DroidModd3rX 8 months ago
search key wont work in little android guy pops up help plz
VenomAndBlackIce 8 months ago
thank you droid x stuck in boot loop fixed thanks
223mt 8 months ago
thanks man!!
captainsh1thead 8 months ago
thanks it work fine
ghostshadow31 8 months ago
Sidney go to my site and download the 64bit motorola drivers
DroidModd3rX 8 months ago
I followed your instructions and my RSDLite V 4.8 does not show my device. I am on WIndows 7 64Bit, using Droid X bootloader 30.04
sidneyayers 8 months ago
Comment removed
sidneyayers 8 months ago
Funky this sets ur phone to factory settings puts it to out of the box state... Not sure y u are getting that error...reboot try again or sbf
DroidModd3rX 8 months ago
when i go into recovery where the triangle with the ! and the android is, at the bottom it says..... E:can't open /cache/recovery/command
funnyking123 8 months ago
Try wiping data in stock recovery
DroidModd3rX 8 months ago
I'm stuck in bootloop and tried reinstalling, but it wont work. anything?
GetGadgety 8 months ago
Funny try sbfing again...no u dont have to be on gb to do it
DroidModd3rX 8 months ago
@DroidModd3rX ok but what exactly does this do..
funnyking123 8 months ago
@DroidModd3rX hey theres no update when i did this.....what does this sbf do?
funnyking123 8 months ago
Wait do I have to be on 2.3 to do this...help ne plz I did this and it says there's no update I can't update to 2.3.... the only thing I did wrong was when it was rebooting I disconnected early like at 20%
funnyking123 8 months ago
i love u....
SrTb0y05 9 months ago
srtb0y05 unzip thesbf file on your pc before loading it into rsdlite
DroidModd3rX 9 months ago
@DroidModd3rX thanks dude, had to do this to get gb. worked perfectly. downloading gb now.
SrTb0y05 9 months ago
i unzip all the files right? the fone cant unzip while in bootloader, at least i dont think
SrTb0y05 9 months ago
Sto13... Yes that is the proper bootloader
DroidModd3rX 9 months ago
Can I do this if my bootloader is 30.04? I need to sbf my phone cause I can't install the OTA update to GB... It fails everytime it starts to extract the files and load it on
sTo13NtHuNd3R 9 months ago
samael.... the verizon file is the file you unzip... if your getting a fail try and redownload the sbf file
DroidModd3rX 9 months ago
168296 you are welcome! glad i could help
DroidModd3rX 9 months ago
nvm i got it now,
but when i click start it says "FAIL" i have the drivers VRZ and sbf idk what im doing wrong?
Samael6768 9 months ago
do you have to unzip the VRZ file too?
Samael6768 9 months ago
YOU ARE THE BEST!!!! I GOT IT FIXED!!!! I JUST FOLLOWED YOUR STEPS LIKE IN THE VIDEO! NOTHING ELSE! THANKS MAN! ALSO I THINK ITS COOL HOW YOU REPLY TO ALL OF US THANKS!THANKS!THANKS!
168296 9 months ago
Bradtruelove... Check the link in the description
DroidModd3rX 9 months ago
Hightension if the sbf is zipped make sure you unzip it
DroidModd3rX 9 months ago