Scooter Zone How To: Use ICS with Nick Darger

[canada665]

PLEASE ANSWER: do you need over sized bars

[noobs36029]

is a french ID head set threedless

[forREVer98]

Does ICS fit 81 customs T bars?



[bryan7771]

hey i have ics and a fsa orbit mx headset and when ever i tighten the ics and go do a trick my bars are loose and wobbley how do i fix this PLEASE HELP

[CALLUMTWEIR]

and were do u get that allen bolt from

[CALLUMTWEIR]

what forks are they



[JallenFilms]

@CALLUMTWEIR phoenix scorcher forks i think:)

[chopaiisimonful]

Does it matter if the bolt goes all the way through the starnut?

[therider407]

@chopaiisimonful nope

[Gaourt]

thanks alot nick!

[Cavroc101]

do you need oversized bars

[therider407]

@Cavroc101 nope you will only need oversized if you use hic compression

[sk8b0ardS]

@axedude98 I think u do need a thredless

[axedude98]

do you NEED a threadless headset?

[therider407]

@axedude98 yes

[markpudovkin1]

hat deck is that



[craftytim1]

what happens if i want 2 get new bars do i have 2 install ics again and how do i get my starnut out

[jtodd97]

@scooterzonevideos will my grit yeh yeh yeh bars with a starnut installed wirk on my thereadless forks and eco headset with out the long bolt?

[FordingbridgeScoot11]

does it make your scooter dieled?

[krisper2010]

Can i use ICS with integrated headset?

[Lloydscooter1]

i want ics but i dont have threadless headset and forks yet but i have a starnut and i tried putting it in my bars and it just went straight down to the bottom of the bar so it wasnt a tight fit

[MegaBaseball57]

can u have hic bars with scs? please reply!!!!!

[siikscoots]

@MegaBaseball57 yes u can gray just need to take out the shim in the scs clamp its matt

[PeakExtreme]

will ics work with my v1 french id fork and district v3 bars?

[dannyboythatdude]

i tighten mine by loosening the clamp and for some reason its tight again then tighten it back up

[iShred201]

My ics makes my scooter really loose like the bars i mean do you know what i should do?

[xNEWPERFECTx]

I cant put on my bars! i put the star nut in. but when i go to put on my bars it stops like what happend to yours. any way to shove it down there?

[PsnDude09]

How do u fix ics when it gets stuck now I cant take off my bars:(

[ScooterZoneVideos]

@PsnDude09

it wont loosen at all?? if thats the case you need to hammer upwards on your bars and periodically check to see if the bolt loosens. if not just hammer upwards on your barswith a mallet until they are all the way off

[theSNAPbackKiDD]

@ScooterZoneVideos could you guys make a vid n this because the same thing happened to me

[scooterguy9]

@PsnDude09 losen your bars completely and stretch your clamp with a penny so you can slide your clamp up.take the bolt out of the bottom of the forks so you know its not the bolt and use a rubber mallot to hammer you bars off. thats what worked for me :) hope it works for you

[blackopstrikshotz]

if ISC pulls on youre bars down onto the headset, whats the point of having a clamp? 

[ScooterZoneVideos]

@blackopstrikshotz

the clamp holds your bars where they are at. so straight and keep your ICS tight

[blackopstrikshotz]

@ScooterZoneVideos oooh ive never run ISC, ive always used HIC

[olliescooters99]

@oOTMGoR3LOAD skater hq have made a video on how to put on a crown race

[MrScottberry123]

how do you put a crown race on blunt sob forks???

plz answer.

[ScooterZoneVideos]

@MrScottberry123

check out our videos, im sure we have one for that, if not its in the integrated headset how to video

[PoloLoco587]

Y doesn't my ics tighten when I start turning the bolt, it's not an Allan bolt it's like a hex bolt, the bolt starts getting a lil hard to twist an then it gets easy and it just keeps repeating the same thing

[olliescooters99]

@PoloLoco587 you have burst the threds on the bolt you need a new bold

[ScooterZoneVideos]

@PoloLoco587

your starnut died. you cant use ics to tighten your bars down. you need to push down on your headset and get it snug, then get the bolt tight so it holds it in place

[freerunskillz]

@ScooterZoneVideos what is happening if im tightening the bolt under the fork and it gets tight and i keep making it more tight and then it comes loose again

[ScooterZoneVideos]

@oOTMGoR3LOAD

we have one

[ScooterZoneVideos]

@evildarkseed

yeah its like that same strength as your blunt probly

[COREscooters2011]

will district al1 v3 bars and district double bar clamp work with razor ultra pro deck and razor ultra pro forks

[ScooterZoneVideos]

@COREscooters2011

yes it will

[Jazmene13]

will my full size proto work with it?

[ScooterZoneVideos]

@Jazmene13

work with what?



[kanefickling]

i have a normal district compression, just the little bolt and evey time i go to a skate park or on the street it falls out in a couple of minins so what do i do thanks

[ScooterZoneVideos]

@kanefickling

the district ICS is just crap. try to get an SCS or go with an HIC Setup

[olliescooters99]

@kanefickling tighten it more or get an new bolt

[iGodxModZz]

how do i take the staR nut out me other bars

[ScooterZoneVideos]

@iGodxModZz

once its used it cant be used again

[iscootfilms02]

do your bars have to be oversized

[ScooterZoneVideos]

@iscootfilms02

no, standard sized bars only, with exception to aluminum oversized bars, those will work

[lilcharmsx4]

Hey um do you guys have team edition scooters? or scooter under 100 beside ultra pro

[ScooterZoneVideos]

@lilcharmsx4

just the ultra pro for that price range

[Gp504]

do you need slits in your bars to have ICS

[ScooterZoneVideos]

@Gp504

yes, you always need a slit unless you have scs

[mmksjgm314]

what kind of fork

[ScooterZoneVideos]

@mmksjgm314

scorcher forks

[kevinminwooyi]

what size starnut do i need for my bars. what happened to the ics kit on your site i only see 7/8 and 1 inch starnuts and i need one for my bars for ics what size do i need

[ScooterZoneVideos]

@kevinminwooyi

we ran out of starnuts, they are back up now

[RAVINGJELLYTOTS]

i have a serious question!! :P i have grit yea yea yea bars no compression, blunt clamp and i have the mgp nitro sealed headset, i have just got blunt sob threadless forks, will these work with my headset and bars or will i need ics for it to work or will it not work at all???? thanks:)

[ScooterZoneVideos]

@RAVINGJELLYTOTS

you always need compression for threadless forks. so get ics

[olliescooters99]

do you get a bolt with district bars since they have a star nut installed

[ScooterZoneVideos]

@olliescooters99

i dont think so, ask district because im not sure

[Tupsuboi]

@olliescooters99 No you dont.

[WheelzzTV]

1:13 kinda sounds like tampon! :D :L

[TheTman171]

does the district v3 bars work with razor clamp

[ScooterZoneVideos]

@TheTman171

no you need an oversized clamp

[TheTman171]

@ScooterZoneVideos k thanks

[TheScooterBase]

Hi ScooterZone if i had £250 for a complete scooter what should i get i thought a MaddGear nitro Extreme....What do you think???

[ScooterZoneVideos]

@TheScooterBase

the nitro is the only good scoot from mgp. go for it

[JamileAmourScooters]

can you use ics on mgp threadless forks? and can you use any clamp with ics or does it have to be a certain type?

[ScooterZoneVideos]

@JamileAmourScooters

ummm im not 100 percent sure with the newer model, ask mgp man. im not too familiar with their products.

[JamileAmourScooters]

@ScooterZoneVideos Err ok. Well thanks anyway.

[Clayry1]

@ScooterZoneVideos um hi scooter zone I was wondering if ican use ics with threaded viper bars and a threadless fork?

[MsEmmamcqueen]

IS THAT A TSI

[ScooterZoneVideos]

@MsEmmamcqueen

yes

[JaaPR2]

why doesnt an ics work on threaded forks ?

[ScooterZoneVideos]

@JaaPR2

for threaded forks the only compression you can use is the 2 threaded jam nuts

[gorilladurham]

lol, u looked all nervous at the end, nice, helpful video though.

[gorilladurham]

can u have threadless forks and an integrated headset and still run ics?

[ScooterZoneVideos]

@gorilladurham

yes

[Codyscoots1996]

@gorilladurham Yes you can still run ics with an integrated headset.. I'd suggest IHC though (Integrated headset compression)

[Codyscoots1996]

My bolt tilt's to the left a little, is that okay??

[ScooterZoneVideos]

@Codyscoots1996

yeah that should be fine

[Codyscoots1996]

@ScooterZoneVideos Thanks man

[jackskate98]

my bars were on threaded forks and they have some small threads inside the bars now can i still use ics or do i need new bars PLEASE GET BACK TO ME THANKS.

[ScooterZoneVideos]

@jackskate98

yeah dont worry about those they are just imprints, not threads. it will all work fine still

[TheScootercenter]

will Blazer Pro Aluminium Handlebars get a LG Pro ics star nut and bolt

[ScooterZoneVideos]

@TheScootercenter

i have no clue who any of those companies are

[MrPANKO99]

can you tell me if this would work as a scooter?? mpg nitro deck, grit threadless forks, eco threadless headset, blunt clamp and district bars?? any help thanks

[ScooterZoneVideos]

@MrPANKO99

yeah but you need ics

[MrGingermoore]

@ ScooterZoneVideos I know that they should be tight but the literally do not fit on there is about a 2mm size difference

[ScooterZoneVideos]

@MrGingermoore

i know they are slightly bigger, they need to be hammered into your bars

[ScooterZoneVideos]

@MrGingermoore

yeah thats normal man

[MrGingermoore]

@ScooterZoneVideos, yes I have the old MGP Y bars

[DJMULLET118]

dose grit forkss fitt blunt headsets?

[ScooterZoneVideos]

@DJMULLET118

yeahh

[MrGingermoore]

I need help! I have got a ICS starnut but it don't fit into my bats and my bats don't go over my forks!!! What do I need to do??? do I need new bars??

[ScooterZoneVideos]

@MrGingermoore

its supposed to be extremely tight. do you have a slit in your bars?

[MrGingermoore]

I have ICS but my starnut don't go into my bars and my bars don't go over my forks so do I need new bars???

[MrSammyboy1982]

do you need a slit on the bars for  ICS

[ScooterZoneVideos]

@MrSammyboy1982

yes you do

[wcscooterteam]

do you use oversized bars??

[ScooterZoneVideos]

@wcscooterteam

no only standard sized bars

[ProjectHoody]

do you need to have treadless bars?

[ScooterZoneVideos]

@ProjectHoody

all bars are threadless

[MrMultixuk]

hey scooterzone how much would it cost at the least to ship to england? i dont care how long it is i, i was told its something like 2 weeks...thats fine, i wanna order some stuff off you but i need to know how much shipping is :D thanks

[PeakExtreme]

does the scooterzone ics work with the original french id fork (v1)?

[ScooterZoneVideos]

@PeakExtreme

yes as long as you have a cap for the bottom, so the bolt has something to grab onto

[PeakExtreme]

@ScooterZoneVideos I don't think I have that, there's a starnut for hic in it, but that's all. Where do I get a cap?

[ScooterZoneVideos]

@PeakExtreme

if you have that starnut in there you will need to take it out for ICS, otherwise it gets in the way of the bolt. as far as a cap, i think PROTO makes some for those forks, at least they used to. if not just use some washers

[PeakExtreme]

@ScooterZoneVideos do you know if it comes with the french id comp kit?

[ScooterZoneVideos]

@PeakExtreme

yes it does

[PeakExtreme]

@ScooterZoneVideos thanks! and too more questions

does dsa ics come with a cap that will work?

Will the black french id decks be in stock you think throughout the holidays? (I want one for christmas ;)

[ScooterZoneVideos]

@shockgamer98

yes you can

[Nickk0609]

will this work with razor ultra pro bars and headset

[ScooterZoneVideos]

@Nickk0609

no you need a threadless headset and threadless forks to use compression

[oregonducks123456]

is ics really that bad?

[ScooterZoneVideos]

@oregonducks123456

nah not too bad

[oregonducks123456]

@ScooterZoneVideos so it wouldnt be bad to get cuz i am only a intermedite rider

[ScooterZoneVideos]

@oregonducks123456

yeah it would be fine

[flyersbydesign]

@ScooterZoneVideos do starnuts work with district forks?

[krazycarrot]

do you need slits in the bars

[ScooterZoneVideos]

@krazycarrot

yes, the only time that you dont is when you have an SCS

[marrokiller]

can i have a proto scs on a madd gear nitro:O?!?!? plz reply!!!

[ScooterZoneVideos]

@marrokiller

yes you can.

[marrokiller]

@ScooterZoneVideos yay! where can i buy it cheap?

[ScooterZoneVideos]

@marrokiller

its $10 on TheScooterZone(.)com

[marrokiller]

@ScooterZoneVideos how much to it cost me to get it to sweden?

[EzZHD]

Can i use ICS for blunt threadless forks?

[ScooterZoneVideos]

@EzZHD

yes you can

[zanescootzz]

does this work with threaded headset

[JSCK1999]

@zanescootzz no, if you want threadless forks you NEED a threadless headset, but threaded forks will work with threaded and threadless headsets. :)

[ScooterZoneVideos]

@zanescootzz

no you need a threadless headset and threadless forks to run any type of compression

[GetVibed]

Please respond will ics work with pheniox forks??

[ScooterZoneVideos]

@GetVibed

nooooo, HIC and SCS only

[doodl3burg3r]

do u have to have a half knuckle for Ics ?

[ScooterZoneVideos]

@doodl3burg3r

no, any standard sized clamp will work just fine

[purpleacorns]

would the ics compression you get off Quebec scooters work with the scorcher forks

[ScooterZoneVideos]

@purpleacorns

yeah pretty much all the ics is the same

[TheHyperOctopus]

@ScooterZoneVideos Hey, Im getting a scooter soon... Is this a Good setup? French Id Steel Tree Bars (Black and White) £48.11 French Id Head set (Black) £25.66 81 Custom FlexFender (White) £19.99 Scorcher Fork (Silver) £57.73 Phoenix 4.0 Deck (Silver) £105.85 Odi Longnecks (Black) £12.76 Pre Cut Phoenix Griptape (Black and white) £2.56 Blazer Metal Core Wheel (Black and White) £30 Total Price Of All: £302.66

[ScooterZoneVideos]

@xxxSMIL3Yxx ive never seen grit ics. but you can only use the district ics with those forks, which is a pain. and you only need one double clamp. the rest wont do anything.

[SCOOTBOARDER101]

I have a problem... i had razor pro forks with district bars... then i bought QCS forks with QCS ics and now when i try to put the forks and the bars together the bars wiggle a lot.

any tips or tricks?

[ScooterZoneVideos]

@SCOOTBOARDER101

im not too sure since im not familiar with either brands products. have you tried pushing the bars down as hard as you can then tightening the bolt?

[ToMoNtAgEs]

what compression is it im not sure to get district or invert

[ScooterZoneVideos]

@ToMoNtAgEs

district is inverted compression... try to use HIC or SCS if you can

[scootinboy98]

what if you put in the starnut in to far in the bars

[ScooterZoneVideos]

@scootinboy98

then you need to get another starnut and put it in

[ChrisShaquilleWalton]

a lot of people tell me that ics breaks easy is this true? and what do i do if it does?

[ScooterZoneVideos]

@ChrisShaquilleWalton

well it doesnt exactly brake easy, but it does get loose very often. it just needs to be mantained and tightened

[ChrisShaquilleWalton]

@ScooterZoneVideos if it does break do i need to get new bars?

[ScooterZoneVideos]

@ChrisShaquilleWalton

nah you will just need a new starnut

[SCOOTBOARDER101]

are those Scorcher Forks?

plzzzzzzz respond

[ScooterZoneVideos]

@SCOOTBOARDER101

yes they are

[Dazeeex]

thanks (y)

[carloeso]

Can Nitro forks work with ICS?

[ScooterZoneVideos]

@carloeso

yes they can

[mrauzzboy448]

How much would it cost to post to Sydney AU

[ScooterZoneVideos]

@mrauzzboy448

add ICS to your shopping cart on TheScooterZone(.)com, then start to confirm your order and it will tell you the amount for shipping before you even pay

[adamascoot]

if i have an ics compression bolt, what length does the fork tube have to be? please respond quick.

[ScooterZoneVideos]

@adamascoot

as long as your ICS bolt is longer than your fork tube you will be fine

[mattscootsplaces]

can you use epic zero offset forks for ics and do you use any bars or oversized bars my volumes broke i donr know whether you mentioned it?