does the PVC vavle "HOSE and the crankcase emission filter" is it included when buying the kit? gotta replace the hose and filter on my car.. sorry if the questions seems stupid, im new to fixing cars
but eventually be too shitfaced to know the difference between a door handle and a floor mat.........noo, not me. but seriously, i would wrench the W.H.O.L.E. motor apart to make it right. unfortunately, my landlord flies on a broomstick till im dead if i mention anything that has to do with fixing my truck on the property. but yes, ill keep trying. thanks 4 your time buddy. :)
ok, i think i have something seriously wrong with the motor! hehe...well, its now running a BIT rough at idle but runs perfect when accelerating? huh! now ive found that my lower drivers side ball joint is blown seeing ive installed them 1 year ago. well im not gonna pull apart the motor so ill drive it till it shits the bed. ;( dont know what to say, if only there was someone in my area that had all the tools neccesary and the space to do it in and ill supply all the beers needed.
hmmmm....well, i have a 94 ford explorer 4.0l and i replaced the pcv valve and i still get oil spitting up through it and coated the entire insides of the intake manifold contaminating the air intake temp sensor. what are the symptoms the engine will experience when the valve goes bad and why is oil passing through?
@grimreaperws no, it doesnt burn oil and smoke but you can smell the sweet smell of antifreeze in the exhaust. i did make a catch jar recently between the valve and the intake to catch any oil that passes through and it works. im more worried about the oil clogging up the injectors though. i do remember that 1 of the spark plugs broke and we had to use an easy-out. we used a high powered air compressor to blow out the ceramic, i think some pieces got inside the cylinder chamber. valve??
Remove themostat housing, remove this, then that, then unscrew the metal bracket that holds the hose, then spend 3 hours pulling and tugging on the PCV elbow/valve....
Does anybody have a video of how to replace PCV valve on a 1998 ford contour 4 cylinder? I have a horrible time finding where it is located at. Thanks in advance.
its located right behind the exhaust manifold in the front of the engine its hard to get to plus its connected to a metal hose which is a pain to take off
This has been flagged as spam show
Excellent !!
Vital Electrocomp PCB CONNECTORS, TERMINAL BLOCKS, PCB FUSE HOLDERS, VITAL CONNECTOR, SCREW TYPE TERMINAL BLOCK, PUSH FIX CONNECTOR, COMBICON, PLUGGABLE CONNECTOR, PLUGGABLE TERMINAL BLOCK, BARRIER TERMINALS
Google Vital Connectors
VitalElectrocomp 17 hours ago
Will do mine soon!
danvo68 2 weeks ago
this video looks like it's been stolen...
NguyenEmpir3 3 months ago
will a defective pcv make a huming noise
20dartmouth 6 months ago
@20dartmouth kinda
mrdeermaster16 6 months ago
does the PVC vavle "HOSE and the crankcase emission filter" is it included when buying the kit? gotta replace the hose and filter on my car.. sorry if the questions seems stupid, im new to fixing cars
Nataliaa13B 1 year ago
@Nataliaa13B I hope you buy a PCV valve instead of a PVC :)
Channin22 10 months ago
@Channin22
obviously i made a type o : )
Nataliaa13B 10 months ago
Comment removed
Nataliaa13B 1 year ago
but eventually be too shitfaced to know the difference between a door handle and a floor mat.........noo, not me. but seriously, i would wrench the W.H.O.L.E. motor apart to make it right. unfortunately, my landlord flies on a broomstick till im dead if i mention anything that has to do with fixing my truck on the property. but yes, ill keep trying. thanks 4 your time buddy. :)
bikr1975 1 year ago
ok, i think i have something seriously wrong with the motor! hehe...well, its now running a BIT rough at idle but runs perfect when accelerating? huh! now ive found that my lower drivers side ball joint is blown seeing ive installed them 1 year ago. well im not gonna pull apart the motor so ill drive it till it shits the bed. ;( dont know what to say, if only there was someone in my area that had all the tools neccesary and the space to do it in and ill supply all the beers needed.
bikr1975 1 year ago
hmmmm....well, i have a 94 ford explorer 4.0l and i replaced the pcv valve and i still get oil spitting up through it and coated the entire insides of the intake manifold contaminating the air intake temp sensor. what are the symptoms the engine will experience when the valve goes bad and why is oil passing through?
please help. :)
bikr1975 1 year ago
@bikr1975
This can mean anything to a crack head,. crack head gasket, or bent valve
does your car smoke ? or just plan lecks oil out ?
grimreaperws 1 year ago
@grimreaperws no, it doesnt burn oil and smoke but you can smell the sweet smell of antifreeze in the exhaust. i did make a catch jar recently between the valve and the intake to catch any oil that passes through and it works. im more worried about the oil clogging up the injectors though. i do remember that 1 of the spark plugs broke and we had to use an easy-out. we used a high powered air compressor to blow out the ceramic, i think some pieces got inside the cylinder chamber. valve??
bikr1975 1 year ago
@bikr1975
i think parts stuck in there try to use a mirror and light not so bright closely looking slowly to see if any stuck stuff in there
grimreaperws 1 year ago
It was a tight squeeze getting it out on a Honda Civic. Had to remove oil filter.
virtualwebman 1 year ago
how about on a 94 ford escort???
RocPrinc3ss 1 year ago
why isnt any 87 grand marquis repair video?
mallie1218 2 years ago
that is it??seems to easy
PolishGuySimonTV 2 years ago
Darn right...
A bit more harder on a 2000 Focus.. 2.0 dohc....
Remove themostat housing, remove this, then that, then unscrew the metal bracket that holds the hose, then spend 3 hours pulling and tugging on the PCV elbow/valve....
viper19861986 2 years ago
@viper19861986 lol! my wife's car is a 2000 ford escort zx2........pcv valve is a pain to replace! same dohc engine as your car!
JasonJForrest 1 year ago
You gotta love that classic instructional video music
matthewcrafter 2 years ago
This comment has received too many negative votes show
lol, who needs a video for this
MohadibTheHorrible 2 years ago
Does anybody have a video of how to replace PCV valve on a 1998 ford contour 4 cylinder? I have a horrible time finding where it is located at. Thanks in advance.
grindstone0 2 years ago
its located right behind the exhaust manifold in the front of the engine its hard to get to plus its connected to a metal hose which is a pain to take off
ezkeyboardkid58 2 years ago
thanks
brianglenary 2 years ago
THANK YOU!! from my newb self =).
illicit0 2 years ago