I think there is a reason this engine is fucked. Tecumseh LEV's like this one are famous for cylinder wall scoring due to inadequate oiling of the cylinder. I had one that died this way, and I've heard of others. Their old engines were great, but the LEV's were pieces of shit, they made them right up until the time the whole company bit the dust in the Tom Gores / Platinum Equity fiasco.
you know, to all tecumseh lovers, these engines have a shty version of an oil pump, its driven on the cam and the oil housing is PLASTIC, so if you don't keep up on oil changes, VERY VERY FREQUENT they will die, end of story, what happens is the pos oil pump wears out being plastic in a hot engine and the pump over time lets oil past the surface between the pump and the cam, which results in poor oil flow and dead engine, also i tore one apart, it doesn't feed oil to the rod at ALL!!!!
tecumseh engines are the best since you maintain and take care of it propely
My tecumseh is still running strong after 2 years of hard work everyday (4 or maybe more hours a day everyday in summer!) since you keep the oil up, never over rev it and keep the filter clean it will never give up on you!
ITS A FIRST PULL STARTER EVERYTIME AND CUTS EVERYTHING NO PROBLEMS AT ALL!
@seelder By using a tight spring or by over-adjusting the governer. They are made to run at 3000/3600 tops, Ive seen some going in the shop running at 4800/5000 cos people think they know what they are doing so they mess around with the throtle links and spring. The mains and rod bushes wear like crazy. AND why do I think tecumseh is SOO MUCH BETTER than Briggs...they have an internal oil pump even in the small mower engines making them much longer lasting and a Steel liner no crap plated bores!
@06mourag wait so you can revv a mower? i have a tecumseh lawn mower and its standard push mower and it has the little lever that u hold down to keep it going but at the same speed the whole time.. so ur saying if i make something on the throttel like a string leading up to the bar i can revv the mower?
@seelder No, they have a self regulating throtle that keeps the rpm steady and stops it from over reving which is operated by a gear and weights inside the engine. the throtle that you can control is only a cable which has a spring at the end which controls the tension on the governer making only small changes on engine rpm. to make a mower rev you need to bypass that spring and use the cable directly on the throtle valve on the carb which is not recomended cos it can over-rev/damage the engine
@06mourag wow ur really helping me :P there is a little lever looking thing at the side of the mower that nothing is attached to im guessing thats the throttel valve? thc so much btw ur really helping
@seelder Haha thanks, just sharing abit of my knowledge :) I will be seting a blog soon were you can ask questions and I will help everyone out and tell them how to do stuff and how stuff works properly because i havent got enough space here in the coments because its limited to 500 caracters :) and I will even be able to upload pics. Good luck with your projects :D And yes that small lever is the governer which is attached to the throttle valve(the more tension the spring is has the more rpm)
now that wat to do to those shittty tecumsehs!!!!!!! briggs is the only good engine out there!!! reliable and hard to kill ,espically the flat head models!
fuck you
dumm518 4 weeks ago
ferrari? not a expensive one though
10yroldcarlover 1 month ago
gotta love country music
victa826 1 month ago
Nah! Everyday use can kill a tecumseh just as easily!
TheAssassin111 2 months ago
dude no one i mean no one says "trashpicking" its all about garbage picking!!!!
reidairsofter 3 months ago
Would this engine have run with a new gasket?
ClassicTVMan1981X 4 months ago
@ClassicTVMan1981X When an engine seizes, it's done for good
Rarrin9378 3 months ago
I think there is a reason this engine is fucked. Tecumseh LEV's like this one are famous for cylinder wall scoring due to inadequate oiling of the cylinder. I had one that died this way, and I've heard of others. Their old engines were great, but the LEV's were pieces of shit, they made them right up until the time the whole company bit the dust in the Tom Gores / Platinum Equity fiasco.
meccaturbo 4 months ago
i was laughing so damn hard when the machine was straining from all the sawdust lmao
Kingoftehill 8 months ago
I don't know how i got here but I would have liked to see you trhowing some raw meat in that machine :D
Kimipeikko 8 months ago
what did you take off? what that the air filter?
seelder 10 months ago
should have taken Governor off
blaine509 1 year ago
@blaine509 what would that do?
seelder 10 months ago
better off running it with no oil at all
pivotboy63 1 year ago
because there was it any thing wrong with so know whose the dompass. it called pass it on
makayla09ist 1 year ago
because there was it any thing wrong with so know whose the dompass.
makayla09ist 1 year ago
u all are fucking dompasses y did not give it away
makayla09ist 1 year ago
@makayla09ist Your the dumb ass why are you being a troll it wasnt yours so you have no right to call them a dumbass. get a life
94civiclxgrey 1 year ago
next time u blow a motor run it a 2 stroke gas withno oil in the motor
shinyfuzzy 1 year ago
@shinyfuzzy what if it is a 2 stroke
MegaLawncare 1 year ago
@MegaLawncare then tune it really rich and give it nos XD lol idk. normal gas would just fuk up the cylinder tho
shinyfuzzy 1 year ago
@MegaLawncare NOOO!!! it will only lubricqate the cyclinder then the bottom end with blow
shinyfuzzy 1 year ago
@shinyfuzzy 2 stroke gas will lubricate the engine, better off running it straight gas with no oil in the case
pivotboy63 1 year ago
you know, to all tecumseh lovers, these engines have a shty version of an oil pump, its driven on the cam and the oil housing is PLASTIC, so if you don't keep up on oil changes, VERY VERY FREQUENT they will die, end of story, what happens is the pos oil pump wears out being plastic in a hot engine and the pump over time lets oil past the surface between the pump and the cam, which results in poor oil flow and dead engine, also i tore one apart, it doesn't feed oil to the rod at ALL!!!!
motorhead45102 1 year ago
tecumseh engines are the best since you maintain and take care of it propely
My tecumseh is still running strong after 2 years of hard work everyday (4 or maybe more hours a day everyday in summer!) since you keep the oil up, never over rev it and keep the filter clean it will never give up on you!
ITS A FIRST PULL STARTER EVERYTIME AND CUTS EVERYTHING NO PROBLEMS AT ALL!
i love my tecumseh!
06mourag 1 year ago
@06mourag how can you overrev a push mower....
seelder 10 months ago
@seelder By using a tight spring or by over-adjusting the governer. They are made to run at 3000/3600 tops, Ive seen some going in the shop running at 4800/5000 cos people think they know what they are doing so they mess around with the throtle links and spring. The mains and rod bushes wear like crazy. AND why do I think tecumseh is SOO MUCH BETTER than Briggs...they have an internal oil pump even in the small mower engines making them much longer lasting and a Steel liner no crap plated bores!
06mourag 10 months ago
@06mourag wait so you can revv a mower? i have a tecumseh lawn mower and its standard push mower and it has the little lever that u hold down to keep it going but at the same speed the whole time.. so ur saying if i make something on the throttel like a string leading up to the bar i can revv the mower?
seelder 10 months ago
@seelder No, they have a self regulating throtle that keeps the rpm steady and stops it from over reving which is operated by a gear and weights inside the engine. the throtle that you can control is only a cable which has a spring at the end which controls the tension on the governer making only small changes on engine rpm. to make a mower rev you need to bypass that spring and use the cable directly on the throtle valve on the carb which is not recomended cos it can over-rev/damage the engine
06mourag 10 months ago
@06mourag wow ur really helping me :P there is a little lever looking thing at the side of the mower that nothing is attached to im guessing thats the throttel valve? thc so much btw ur really helping
seelder 10 months ago
@seelder Haha thanks, just sharing abit of my knowledge :) I will be seting a blog soon were you can ask questions and I will help everyone out and tell them how to do stuff and how stuff works properly because i havent got enough space here in the coments because its limited to 500 caracters :) and I will even be able to upload pics. Good luck with your projects :D And yes that small lever is the governer which is attached to the throttle valve(the more tension the spring is has the more rpm)
06mourag 10 months ago
damn thing didnt wanna die
gavinabcdefghi 1 year ago
Best thing to do with a Tecumseh motor: Briggs and Stratton all the way!
mattbod 1 year ago
I have herd of hydrolocked but never sawdustlocked
frosty9595 1 year ago
dude u have en efin ferrari nice
alekscooool 1 year ago
What does your dad do to be able to afford a Ferrari and an X5 and such a nice house? I want nice things too. What do you do? Engineering student?
irocz0r 1 year ago
@irocz0r he trash picked it all :D haha
kelstrophic 1 year ago
I love need you now, Country is the best song to blow stuff up in.... even better when you got a pinch of cope in
rhett443 1 year ago
nice ferrari
KartCentral 1 year ago
you saved the old gas? wow
BurningTirez 2 years ago
need you now is playing in the background ha ha
briggs5sboy 2 years ago
Country music is the only thing ever playing in my garage.
TheAlexManVideos 2 years ago 4
@TheAlexManVideos need you now is pop music
irocz0r 1 year ago
@TheAlexManVideos i praise you for playing that i hate how people always play ghetto rap or something in spanish. although i do love country.
Rarrin9378 1 year ago
nice car
The1981DMC 2 years ago
it's good that it locked up. let it cool for like an hour, and it would probably start right up.
the5445 2 years ago
now that wat to do to those shittty tecumsehs!!!!!!! briggs is the only good engine out there!!! reliable and hard to kill ,espically the flat head models!
gokartbuyer 2 years ago
You should have let a BB or two from a BB gun get sucked inside ;)
That would have been fun! :P
That, and you should have taken the rev limiter off to let it rev a bit higher! :P
Mtrhd0024 2 years ago
HA HA HA , it goes blaaaaauuuu when u trow that dust in it
85ccmaster 2 years ago
fucker will not die
The1981DMC 2 years ago
hahaha
XR50ryder 2 years ago
You should tear it down and show us the damage on the inside.
StillenGtr17 2 years ago
Keep your eye out for part 2. That's all I'll say for now.
TheAlexManVideos 2 years ago
alright cool
StillenGtr17 2 years ago