Assembly of Marksman Repeater BB Gun 1010c

[mdhdhair]

Thanks I found my childhood repeater in my dads garage. It's been 25+ years, I forgot how it loaded. Thanks for the video. Don't mind the dude complaining. That's the beauty of utube it's punk rock, like a garage band... Raw. If you want a great pro vid watch a sitcom on T.V. ;) thanks for the up!

[H4rdSty1eAdd1ct]

i like the part when he says boom

[kyledbsxcwqp]

i have a better vid :D

[turbophein]

@kyledbsxcwqp if you are going to go through all the trouble of making a new video at least make a better quality video. its just as shitty being made years later, minus the 2 good photos you added. and i love how you use my terminology in your video! Good Luck with your comments and don't be a pussy and delete the bad ones...

[kyledbsxcwqp]

could you show a better pic of how the longer spring is placed?

[eduarmega]

man thank you very much you saved my gun XD i thought that i had destroyed it but it was only the trigger

[Chwigga89]

if you put a heavier spring in it, u think it would fire harder?

[77stucknbfe]

How the hell does the Trigger Spring go back in ? I'm about to throw the damn thing out the back door... I need a Clear Pic

[turbophein]

@77stucknbfe lmao its pretty easy, just take a good look at it...

[kyledbsxcwqp]

@77stucknbfe check my vid

[MrGingerballsack]

@77stucknbfe mate thats what i want to know does my nut in

[77stucknbfe]

You can figure out how to reassembled that bb gun, but can't find the Focus on the fukn camera ???

[turbophein]

@77stucknbfe

its a shit digi cam, no focus

[arturpoint0]

hey u know the lil piece that holds the slide thing sorry idk the names, but the slide thing holdings the pulling thing in the back which is attacked by dat lil piece dat ur supposed to put on so the slide will work with the pull back, i cant put dat on can u plz help me??

idk how to do it correctly :/

[toobeast2013]

if you can't fix it you shouldn't have one trow it away

[toobeast2013]

even doe the video is kind of blurry like he says this video helped me fixed my BB so if you don't understand how to fix your BB you are a fucking idiot he shows you pretty damn clear.

[GeneralWiskers]

boom...this wasnt helpful at alll but i watched it so many times cus its so fuckin funny, boom..

[GeneralWiskers]

boom...

[MoRiWanna]

Yo try taking close up pics of where each part goes, If a person can't figure out how to insert the part knowing where it goes that person shouldn't have a BB gun altogether. ;)

[MoRiWanna]

you suck at producing man. Try looking for a video on making videos.

[MoRiWanna]

take pictures of where each part is placed. derp.

[poobed666]

thanks for the video man, but theres only one thing wrong with my gun... the safety slides back and forth, any ideas on how to fix it?

[lygersarereal]

@poobed666 I'm going to make a high quality video on how to assemble the 1010C, part by part, slowly. I will include proper assembly of the trigger too. Check my channel weekly to see when it is added.

[stephmc111]

wow the comments here. i would like to say thank you vary much. i have the exact same marksman repeater and your video helped me. Thank You. the only part i cant figure out is the clip spring.

[Reaper04678]

is there a web site that shows pics of the springs

[Reaper04678]

is there a web site that shows pics

[kthxplzdrivthru]

This video sucks, first off I can't see a damn thing.. Second, you pick up items and turn them around before you put them in place so you can't see which way they go. And third, you have a weird voice.

[freddy130wrestler]

this gun is a BITCH to put back together

[FrioFrijoles]

If you could remake this video more top-down and in-focus, you would be quite an awesome dude. I'm sitting here with my pistol disassembled and can't figure out which parts the springs keep tension between. I sort of got the trigger spring but the clip/barrel spring is being a giant f.u. I understand that it's a lot of effort to dis/re-assemble this pistol let alone make a video walk-through of it. Maybe you don't even have the pistol any more, I don't know, I was just putting the request out.

[shadowwolf386]

Where exactly does the first spring go?

[TheJackassTEEN]

Could you remake this please, I got a few cuts from when trying to put the two sides together, I think the pieces inside are getting fucked up... my last try the gun spring won't go forward, it stays in loading position, even when I pull the trigger or push it forward

[XxhilfmirxX]

hey, figured i would give u some constructive criticism since no one did.. put ur camera in macro mode for close shots :)

and another thing..

THANKS! finally got mine together lol

[IBZDaGeek]

Dude, thanks so much, I had such a hard time with the trigger release plate... YOUR AWESOME!!! And Mr089meriera ur a douchebag.

[nworb2brown]

the video might suck but it got my gun fixed!so stop complaining!!!!!!!

[thefrankarchambault]

IS THE GUN ALL MADE OF METAL ?

[siradheis]

Thanks for the video :) Even thought the quality was not perfect it still helped a lot!

[zupzipzap]

Thanks for the video. Friend asked me to reassemble after his "exploding" disassembly. Only change I made was to place the mainspring assembly in first, then the rest of the little parts. I also placed the rear section of the main spring assembly in first. I could use the airpump housing for better grip/control.

Thanks again.

[Chrisdecalis]

Thanks for the video, I took mine apart to repare it, now i'm trying to reasemble it. You did a good job on the video but the only thing I can't see is at 0:40. I could not saw how you put the little spring, tried some ways but i'm not convinced... if you could give me a hand there please, it would be cool.

[MrZurielito]

MUY BUEN VIDEO

SOLO QUE NO SE ALCANZA VER LA PARTE QUE ME INTERESA

ES EL RESORTE EN "V"  EN EL MINUTO 4:05 ESPERO TU RESPUESTA

PLEASE

[MrAndelver]

which spring do i use for the trigger the one shaped like a V?

[kriegmeister3000]

Thanks for making both vids. I have no intension of taking mine apart though since a little oil went a long way. Now it shoots just fine. It is very old, like from the early 70s. These things are like a A.K.47 they take a lot of abuse and come back for more.

[lakesidelimo]

how does the trigger spring go in? i got the trigger working but the slide release wont work.

[EtSturtNummer]

I can't get that last little piece on..

[theblackpixieJTHM]

OK for those who can not figure out where the spring goes at 1:17 it goes between two plastic pins on the underside of the trigger piece and the facing side of the safety piece; so they are pushed apart. (trigger pushed forward, safety pushed back)

The spring for the trigger/safety mechanism is the most impotent part of assembly.

just remember if it doesn't lock when you cock it back with a pair of pliers then you need to change the position of the spring arms.

[NotViewed]

This guy made a pretty good viceo despite the camera and light, otherwise ok.

I couldn't get past the rediculous accent, NY??NEng???

I dont know, it sounded like the love child between Cliff Claven and Barbarino.

How would people in those areas determine if their child is slow? In normal parts of the country, slow kids talk like that.

[nolyboy15]

i still cant get it >.<

[iRIDEaRMZ]

man your video was super helpful...just the trigger spring was pissin me off cause it kept poping off everytime i put the other side of the case on

[Mr089moreira]

u fucking video sucks you cant see shit... the hardest part is the strings and i still cant figure out where to put them... remake the video

[turbophein]

@Mr089moreira

why don't you learn how to spell/type and then you can post something... i said at the beginning of the video that the lighting and camera sucked. make your own dam video. i learned how without a video, but your most likely a moron and can't figure anything out anyways...

[kowen91]

@Mr089moreira he's the one that did the work and made a video. quit complaining. if you don't like it watch another one instead of wasting your time and his by whining about something he did to help. and yes it did help me out a lot. did you make a video to help people? no did you figure it out yourself? no did you DEMAND a person redo something that you didn't pay for? YES are you that important that you can make such demands? NO!

[kowen91]

@Mr089moreira Why are you being such a child about this? he's the one that did the work and made a video. quit complaining. if you don't like it watch another one instead of wasting your time and his by whining about something he did to help. and yes it did help me out a lot. did you make a video to help people? no. did you figure it out yourself? no. did you DEMAND a person redo something that you didn't pay for? YES. are you that important that you can make such demands? NO!

[Hammer79a]

On the plastic ver. there is a small plate that goes on the back of the spring. Idk if that is the same for the metal one or if it matter'd

[jayse4em]

I was wanting to take mine apart because of some rattelling in the front of the gun but it still fires alright so should i really bother?

[JKninetyfour]

@jayse4em No.. Thats exactly why i took mine apart and it was just a pellet stuck in there.. Now I'm stuck with a disassembled gun and there is absolutely no decent videos on how to put it back together (no offence to the maker of the video).

[slayerluva1]

do you know where i can get a new slide? cause one of the tabs on mine broke off.

[TheZiebeck]

Where dose the triger spring go

[27LilBaller]

WAT DOES IT MEANS WHEN ITS SAYS 18 SHOTS WITHOUT RELODIN?

[fhfg4]

the spring wont stay in the lil place were it supost to it just keeps shooting off and i know i have it on there all the way

[sauloorozcob]

when i put the springer everything fly's out

[sauloorozcob]

i just noticed fagget you bitch

[sauloorozcob]

fagg how did you take apart

[turbophein]

@sauloorozcob i don't know, maybe you should watch the disassembly video, you fagg

[fhfg4]

im trying to take it appart but the pullback part wont come off how do i get it off??

[sauloorozcob]

@fhfg4 youll need someone to help you on that you get the gun upsidedowns and then you pull then thing and with something you pull out this silver mettal pice of the clocking thing

P.S:hope this helps not just for you

[fhfg4]

@sauloorozcob well.. i have a lil prob.. i disided to take apart knowing my stupid self and not knowing were anything gows i took it appart more and now i have no clue were anything goes and the vid here i cant realy see anything going on becuse he dosent have very good lighting so his shadow is in the way soo ya. were can i go to get it put back to gether and how much do u think it would cost?

[sauloorozcob]

@fhfg4 i wouldnt recommend reparing it i would just buy a new one and he directly tells you he might not show but he tells you were they go or at leats you see were he puts them

[Sasuke89MS]

lol i took mine apart to clean it an re-oil it. the only thing that is stumpin me is the correct way to set the trigger spring...O_o

[magicbobby125]

i just assembled mine and there a little like foam peice and i wanted to know were does it go

[turbophein]

@magicbobby125

i got mine used and it didn't have any foam in it

[phantom9195]

@magicbobby125 i think the person what sold it to you might have had a little fun with your gun mate, sorry