hi, i deleted the installer.dmg from the iso because i wanted to use just the live dvd and then i could burn it to a single layer dvd, but my eeepc, and my computer is continuing the install when i select the usb..so, installer.dmg missing is the problem?
Hi I just tried to install following your instructions step by step; and when starting mac, even with -x -v, it gets stuck with: Extension “com.apple.driver.iTunesPhoneDriver” has no explicit kernel dependency: using version 6.0
after waiting for about 20 minutes from that message, the netbook automatically restarts :/ any help would be greatly appreciated!
This tut works like a charm, short and good. Only fault is i had to reinstall and do "-v -F" on the first boot because it locked up when i did not pass these parameters on the first install boot.
the blue screen is easy... download the last ipc 10.5.6. and the other trouble is the wireless lan!!! the hardware is detected but i cant find wifi signal it just keep searching!!! i need someone help here... sorry about my bad English thanks before
Sleep does not work. The computer will go to sleep if you tell it to, but it never wakes up. I'm not sure if there's a fix for this. I have used "deep sleep" widget to make the computer hibernate and it will wake up, but sound doesn't work after that and the internet doesn't work. Does anyone know how to get sleep working? It is not commented on in this guide.
Does this video omit any steps? I have an eeePC 900 too, and tried to install iPC 10.5.6 but it hangs at the blue screen before the Mac OSX installation options come up.
To I need to do anything else on top of putting the disc in and setting it off in -v mode?
I tried getting the iPC image on my USB-stick, using my other hackintosh. I managed to get it to boot, but when it gets past darwin boot, I get the message "Please contact the Voodoo Kernel dev-team..."
Hi! Thanks for this amazing video. I wanna know how to boot from OS X. Actually I have to use an Eee Boot (Boot 132) disk from an external usb driver to access Mac. Any ideas?
You will need to have a bootloader. Boot 132 is a bootloader + kexts that boots up any stored OS. You could easily download and install Chameleon after starting up with your Boot 132.
An alternative is to store bootloader + every needed kext on a small partition, and boot system with that, then make that partition boot another with Vanilla OSX. That way you can reinstall your Vanilla OSX, without reinstalling bootloader etc. But this is a bit more work.
Thanks for the reply! I guess iPC 10.5.6 doesn't install Chameleon by default. My Eee PC 900 had a Windows partition installed in 4GB SSD when I've tried chain0 and tboot tricks. Nothing had worked. Then I deleted Windows and installed Ubuntu on the same partition (4GB) and pointed the Linux Grub to my other drive (16GB SSD) but it couldn't found OS X. After some kernel panics on the startup (using EeeBoot CD), I've decided to install the retail disc and discard this iPC troubled installation...
I'll test Tiger on my 900. And it did work. Still some install to go but its woriking. So I know it's not wrong on my computer. But can you get me a copy of your Leopard? Because all of them I downloaded does not work.
nice, very cool, is there any way to install it onto an SD card, lol im am bit of a wimp- thats how im using linux :) i really dont wanna touch my xp partition cos i use it for school etc. could u see if it recognises SD cards as an installable drive? BTW mate you have a GMA915 :D (or do u have to use the GMA900 drivers for a fix or something?)
dude that was awesome lol
actcually quite quick to boot as well (compared to my xp lol)
isn't the lifetime of a sd card too short to use a os? i mean it's okay if it's a live os which uses the sd card only for booting, but i read that the lifetime of current solid disks is around 80 days when you work for 8 hours per day on the os.
hello which iso did you use?
SotiriosStilianos 2 months ago
@AndreyXaker how do I put this on a emachine that is running Xubuntu its a desktop intel proccesos want to put snowlepoard 10.6.3 on it
USBpowerify 2 months ago in playlist More videos from AndreyXaker
Bro very nice and usefull video !! 5 stars man and thanks,
why did you put this music under it..now other people make money with your video..:(
channel48 3 months ago
Great!!!!
the best tutorial ever....one thing...
does your guide works on an eeepc 901?
i know that the hardware is different....how can i do?
thank you very much
macnug1 7 months ago
hi, i deleted the installer.dmg from the iso because i wanted to use just the live dvd and then i could burn it to a single layer dvd, but my eeepc, and my computer is continuing the install when i select the usb..so, installer.dmg missing is the problem?
TheLittleguy66 8 months ago
Hi I just tried to install following your instructions step by step; and when starting mac, even with -x -v, it gets stuck with: Extension “com.apple.driver.iTunesPhoneDriver” has no explicit kernel dependency: using version 6.0
after waiting for about 20 minutes from that message, the netbook automatically restarts :/ any help would be greatly appreciated!
MrColorfulSharpies 8 months ago
хыы, АндрейХакер)) а, полистав комментарии, не нашел ни одного русского.
а вот ежели подумать, зачем ставить на еее макось? она же там жутко тормозить будет, не рассчитан ведь еее на подобное
JoeNL0 10 months ago
@JoeNL0 эээээ..... нет? Вообще то довольно шустро работает.
AndreyXaker 10 months ago
This tut works like a charm, short and good. Only fault is i had to reinstall and do "-v -F" on the first boot because it locked up when i did not pass these parameters on the first install boot.
ThyMole 1 year ago
I do appreciate this video... Nice one... thanks
mauritiuslisting 1 year ago
how much can i say i THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU. :););;:)
iamreallytech 1 year ago
FOR THE PEOPLE WHO HAS PROBLEM WITH THE BLUE SCREEN YOU GUYS ARE USING THE BETA GO ON GOOGLE AND LOOK FOR "10.5.6 Osx86 Final"
iamreallytech 1 year ago
i have a problem its stuck on the blue screen load rite before the setup. i'm on the asus eee pc. and i couldent fine a new version like @hpedw did.
iamreallytech 1 year ago
i did it i got a image and a usb dvd drive,
i installed mac and restarted.
i carn't boot into mac??? it says press your power buttion for a few secs
Asus Eee Pc 900
900mhz
22GB
1GB
WIN XP
Mac OS X
Macisthebestinnz 1 year ago
how i do it if i wanna use a USB??
kronan0498 1 year ago
on the 1000h didnt work..
while rebooting with -v -x a i get "mac framework successfully initialized
using 104485 buffer headers and 4096 cluster IO buffer headers"
any tip ?
note : i was using ideneb
zrebrutibreniti 1 year ago
the blue screen is easy... download the last ipc 10.5.6. and the other trouble is the wireless lan!!! the hardware is detected but i cant find wifi signal it just keep searching!!! i need someone help here... sorry about my bad English thanks before
hpedw 1 year ago
@hpedw do u know where i can download it??
Thanks. and your english is not bad. :)
iamreallytech 1 year ago
@iamreallytech Easy just us piratebay or u try to find the SSE 2 & SSE 3 if i not wrong... thanks by the way..
hpedw 1 year ago
This has been flagged as spam show
@iamreallytech @iamreallytech Easy just us piratebay or u try to find the SSE 2 & SSE 3 if i not wrong... thanks by the way..
hpedw 1 year ago
This has been flagged as spam show
@iamreallytech @iamreallytech Easy just us piratebay or u try to find the SSE 2 & SSE 3 if i not wrong... thanks by the way..
hpedw 1 year ago
where do i find my drivers
KINKBMXandGaming 1 year ago
Comment removed
hpedw 1 year ago
how can i get the Wirless lan?
Demscrapperboy007 1 year ago
ist it the jaS version?
Demscrapperboy007 1 year ago
Sleep does not work. The computer will go to sleep if you tell it to, but it never wakes up. I'm not sure if there's a fix for this. I have used "deep sleep" widget to make the computer hibernate and it will wake up, but sound doesn't work after that and the internet doesn't work. Does anyone know how to get sleep working? It is not commented on in this guide.
acemonvw 2 years ago
Thanks very much !!
theHDJs 2 years ago
Does this video omit any steps? I have an eeePC 900 too, and tried to install iPC 10.5.6 but it hangs at the blue screen before the Mac OSX installation options come up.
To I need to do anything else on top of putting the disc in and setting it off in -v mode?
BastyBoo 2 years ago 2
@BastyBoo I have the same problem. any solution???
xtreme84a 1 year ago
@BastyBoo mine does too :S
raketenDK 1 year ago
@BastyBoo i have the same problem... any solutions?
Nickolakis21aek 1 year ago
I tried getting the iPC image on my USB-stick, using my other hackintosh. I managed to get it to boot, but when it gets past darwin boot, I get the message "Please contact the Voodoo Kernel dev-team..."
"panic(cpu 0 caller 0x001A8335)..."
A flag that can be set?
nordemoniac 2 years ago
Tried on my other hackintosh, seems like it suffers kernel panic too! Even though it was installed from the same image, only as a DVD.
Guess I will NEED a USB-DVD, or is there anyway to make this work from a USB-stick?
nordemoniac 2 years ago
Hi! Thanks for this amazing video. I wanna know how to boot from OS X. Actually I have to use an Eee Boot (Boot 132) disk from an external usb driver to access Mac. Any ideas?
zigfridz 2 years ago
You will need to have a bootloader. Boot 132 is a bootloader + kexts that boots up any stored OS. You could easily download and install Chameleon after starting up with your Boot 132.
An alternative is to store bootloader + every needed kext on a small partition, and boot system with that, then make that partition boot another with Vanilla OSX. That way you can reinstall your Vanilla OSX, without reinstalling bootloader etc. But this is a bit more work.
nordemoniac 2 years ago
Thanks for the reply! I guess iPC 10.5.6 doesn't install Chameleon by default. My Eee PC 900 had a Windows partition installed in 4GB SSD when I've tried chain0 and tboot tricks. Nothing had worked. Then I deleted Windows and installed Ubuntu on the same partition (4GB) and pointed the Linux Grub to my other drive (16GB SSD) but it couldn't found OS X. After some kernel panics on the startup (using EeeBoot CD), I've decided to install the retail disc and discard this iPC troubled installation...
zigfridz 2 years ago
is this worked for you? i have also a retail disc! plz let me know your install steps! thx
flimi 2 years ago
hi where can i get the ipc to install mac osx on the eee pc??
aldell15 2 years ago
thepiratebay(.)com
AndreyXaker 2 years ago
could u put a link? it is hard to find it.
croxrox159 2 years ago
How did you Get wireless to work?
persio1 2 years ago
how do i get my wireless to work airport works but nothing else so i cant conect to my network plaese answer
persio1 2 years ago
Ok i have an idea, i PM you =)
PSPiGH 2 years ago
Omg you are liar!
-GMA 900 is wrong on 1000 series
-WIreless driver is wrong on 1000 series
HGraphics card should be GMA 950, and WLAN driver Ralink RT2860...
PSPiGH 2 years ago
Sorry
AndreyXaker 2 years ago
and you have completely different processor and motherboard:P
you got atom cpu with northbridge chip :P
Beakybal4 2 years ago
lol eee pc 900 haves a 900 mhz intel celeron 535
bbmmxx 2 years ago
he haves 900 series u retared!
bbmmxx 2 years ago
You retarded, we have made a deal, he just said that the same drivers works on 1000 series..
PSPiGH 2 years ago
@PSPiGH READ THIS IS A TUTORIAL FOR THE 900 NOT THE 1000 SERIES !!
channel48 3 months ago
Now got it work!!! thanks! i just had to update bios...
PSPiGH 2 years ago
Omg not working, stack on:
AppleDecrypt: Starting...
PSPiGH 2 years ago
Works with 1000H?
PSPiGH 2 years ago
Yes
AndreyXaker 2 years ago
With exactly same driver and patch settings?
Are you 100 % sure?
PSPiGH 2 years ago
YEah but sound are different Search GooGle
AndreyXaker 2 years ago
But ethernet is the same?
PSPiGH 2 years ago
yes
AndreyXaker 2 years ago
Will this work on a 901?
justinsyouthing 2 years ago
Yes
AndreyXaker 2 years ago
Comment removed
seansfilms 2 years ago
I am now on my vacation. I answer all your questions when i come back.
AndreyXaker 2 years ago
i cant get my wlan or lan working...help
aplmonster 2 years ago
Check the info to the right of the video
webjthefirst 2 years ago
can i use a external HD to instal osx.iso?
bigfenomeno 2 years ago
pls tell me how to boot osx, i have install it an Windows works but mac says pleace restart your computer...$
how can i fix it?
thcguru 2 years ago
How well does it run? Does it have sound wifi ect. ?
justinsyouthing 2 years ago
Yeah for this computer it works realy well. All working!
AndreyXaker 2 years ago
Cool thanks for posting.
justinsyouthing 2 years ago
great Job i got the asus 900HD and donna try your tutotrial, thanks and just wonder if the wifi works.
bigfenomeno 2 years ago
hi can you make a little tutorial for the wireless?
erBUDDA92 2 years ago
Not now. I dont have OS X on my Eee PC wright now maybe later this week.
AndreyXaker 2 years ago
could you do this from a flash i dont have a external drive
justinsyouthing 2 years ago
yes but you need OS X installed on another computer
AndreyXaker 2 years ago
I have it on my macbook so I can just get it from there?
justinsyouthing 2 years ago
for a mac or an osx86 pc go to disk utility and click your drive and go to the restore tab and restore the image to your flash drive
Note: for mac os x tiger it has to be 6-8gb flash disk.
For a leopard install use a 8gb drive or a 10gb drive
Good Luck
Jcam962
jcam962 2 years ago
hi, sorry for my bad english but I'm italian.
I install leopard with iPC ,leopard works fine but I'm a newbie in mac and I don't konw how do to install the audio driver.
help me
Thx
erBUDDA92 2 years ago
I install the driver, sound and ethernet works but the wireless isn't work... help me
erBUDDA92 2 years ago
light on eeepc is on?
AndreyXaker 2 years ago
yes the blue light is turned on.
erBUDDA92 2 years ago
Search on insanelymac . com this Atheros AR5007EG
AndreyXaker 2 years ago
I try the insanelymac guide but the wireless insn't found any connections.
you have msn?please help me.
erBUDDA92 2 years ago
i have skype. You use KissMac?
AndreyXaker 2 years ago
yes I use kissmac,damn I don't have skype... I send to you my email,send to me your email...youtube chat is so slowly.
In network preference I have the airport in ON status and there is a little orange light.
when I started kismac (airport extreme passive mode) i click on start but kismac don't find any connection.
erBUDDA92 2 years ago
Try to turn airport off restart and turn airport on again and try again
AndreyXaker 2 years ago
check your email box :- )
erBUDDA92 2 years ago
@AndreyXaker can u help me ?
daktyluss 1 year ago
could you do this on a asus eee 900 ha? please answer
Luvyounot708 2 years ago
Yes
AndreyXaker 2 years ago
I download iPC_OSx86_10.5.6 iso but I only get a blue screen after a while. Why?
JMCof82 2 years ago
Dont know
AndreyXaker 2 years ago
Haha Good answer. Before the blue screen, I get a some fault messages. Do you get them too? Ex; Falled to count the number of files .......
JMCof82 2 years ago
No, i gust get gray screen after load and then wallpaper and language select.
AndreyXaker 2 years ago
I'll test Tiger on my 900. And it did work. Still some install to go but its woriking. So I know it's not wrong on my computer. But can you get me a copy of your Leopard? Because all of them I downloaded does not work.
JMCof82 2 years ago
I dont remember where i download it i have only the disk
AndreyXaker 2 years ago
Ok do you remember exactly what the iso file name was? Or was it just iPC Mac OS X 10.5.6.iso?
JMCof82 2 years ago
iPC OSX86 10.5.6.iso Maybe like this. Also i remember that i downloaded on some russian torrent tracker Torrents . ru
AndreyXaker 2 years ago
how much memory does your asus 900 have? mine has 16gb but im not shure if it will fit.
xronderful 2 years ago
should be enough.
myztic123 2 years ago
OS X requires 8GB at least so yes it will fit very comfortably on your 16GB eee :D
Beakybal4 2 years ago
iPC requires 6 GB!!!!
AndreyXaker 2 years ago
nice, very cool, is there any way to install it onto an SD card, lol im am bit of a wimp- thats how im using linux :) i really dont wanna touch my xp partition cos i use it for school etc. could u see if it recognises SD cards as an installable drive? BTW mate you have a GMA915 :D (or do u have to use the GMA900 drivers for a fix or something?)
dude that was awesome lol
actcually quite quick to boot as well (compared to my xp lol)
Josh.
Beakybal4 2 years ago
Yeah you select GMA900 and video work nice, even with transperent bar! Yeah if it recognize it you can install on SD card.
AndreyXaker 2 years ago
isn't the lifetime of a sd card too short to use a os? i mean it's okay if it's a live os which uses the sd card only for booting, but i read that the lifetime of current solid disks is around 80 days when you work for 8 hours per day on the os.
myztic123 2 years ago
I don't know ) I just use it! :D
AndreyXaker 2 years ago
but you have a ssd harddrive right? not one of those little sd cards with 2,4 or 8gb?!
myztic123 2 years ago
Yes
AndreyXaker 2 years ago