I am new to vaping, and after looking through your vids and others I thinking the Prodigy V 3.1 with the 6 volt from puresmoke. However, so many people are in love w/ the silver bullet. So what would you choose if you where going to buy today?
@pdt1212 Well... I have 3 silver bullets and one prodigy , Kinda speaks for itself, the SB uses a bigger longer lasting battery. The Prodigy is good, it has a bottom button which some people don't like.
i love this mod but it kills atomizers left and right i cant seem to get a 510 atty to last more then 2 days on average shortest time i have gotten off of one was about 20 minutes and longest was 5 days maybe a week and carto's almost as bad, what am i doing wrong ? i had to quit vaping because it was costing to much for new atty's and i had to go back to analogs because i had to wait for new atty's every few days what can i do to fix this issue ?
@randomnoone It's strange only because I have never, in almost 3 years, killed an atty like that. Are you running 3.7v or 6v ? maybe check the atty connection and make sure it's getting a snug fit with the connection on the V3
@GrimmGreen 6v yea i tried many variations of tight and lose and it just pops them at random i think they were good attys i got them from puresmoker don't think they where super cheap attys or anything and tried 2 or 3 from other vendors seemed to suck just as much
I am interested in buying my first mod and really need one that will last. I saw your vid on the MAP tank and would love to try one out but am not sure what the best mod to buy would be to use with both the MAP tank as well as a 510 atty when I want to manually drip. any suggestions? thanks in advance and thank you for your videos they are extremely helpful!
@punkrocgirlie1 For the MAP tank to work on a mod , you need a mod with a flat top , like the SilverBullet or the Bombshell , any mod with a "Juice catch" will not play nice with the MAP tank
i have found a nice silver contact RN4081 or what ev the number is the one that comes on njoy smoking every where mini etc. from logic ecigs. com and it says non rechargeable but it is. and the cartomizer is really awesome try it out for eleven dollars awesome.
You may have already figured out how to stop the battery rattling, but if not that neodyme magnet spacer works like a charm i shake the v3 and there is NO movement inside the chamber. so if you still have this problem go to vaporkings and grab the magnet its great. I use it in my GGTS as well and it is the tits! funny thing is i spent an arm and a leg on the GG and the prodigy performs just as nice and is a far more simple device, son of a b**ch! be good man always a pleasure
Hey grim lush here, love your videos you've given me some good advice in the past so I am here to return the favor. I see your one issue with the prodigy v3 is the rattling of batteries when using 2 LiFep04 batts. I have a prodigy v3.1 and had the same issue. so I went on the vaporkings site and purchased a neodyme magnet batt spacer. its like a 10th of an inch thick, it sits between my two LiFep04's and the rattling is GONE. it makes them fit snug as hell.
I have the same experience with LR attys. I get two weeks if I'm lucky and I vape atty-friendly juice. Otherwise, I can count on burning one up in a week like clockwork. Still my favorite vape. 5v didn't work for me, I just couldn't get past the burnt taste it gave all my juice, so LR is the devil I live with.
the 510 atty they gave me blew in 2 hours and i poped 3 more that day and have gone through 6 of there cartos this week wheres the best place to buy 510 atty's to use with the v3 ?
@Vapethis I know right. I have a bloog, and just ordered my v3.1. I can't wait O_O. My bro has an omega which is a beast so I'm ready to join the big boys club.
What Brand Cartomizers are you using. I tried using Bogen 510 Softcaps and blew all of them using the V3.1 6 Volt. Also blew 1 510 atomizer from Totally WIcked. So now all I am using is the atomizer that Puresmoke sells and a drip tip. But I would like to use a cartomzer.
@Vapethis well, They can both do 3.7 and 6v, the SilverBullet is easily if not THE most proven / tried and true PV's on the market. The v3 is awesome , but the bottom button might put some people off
You said you're using a 510 cartomizer at some point during the video. I order my V3 with a 510 adapter, but I wasn't sure if I could just order some refillable atomizers for the ace, or if I needed to order a special adapter in order for the atomizer to fit. Also was wondering if you think it would be more cost efficient to vape only out of cartomizers since they're a buck each. Using them with the ace, the flavor isn't as good, nor is the vapor production. What do you recommend?
@blindsk8r490 so i was using a 510 cartomizer in this video, it's much different than the Ace cartoz that puresmoker sells. the 901 connection for the V3 should fit the Ace carto that PS sells. I haven't had much luck with the Ace cartoz at high volt. 510 cartoz seem to perform much better IMO
I currently have a BluCig.. It's awful, I was wondering if this would be a good replacement kind of thing? I smoke around a pack a day and I'm really wanting to go with e cigs to quit buying cigs.. Any Suggestions?
@dscarrillo24 Compared to the BLUcig the V3 is a BEAST , it runs and nearly double the voltage, and will be MUCH bigger in size. Something like the Janty eGo or the TotallyWicked Tornado might be more your speed right now.
@GrimmGreen From the standpoint of money, which of your 510's would you suggest getting as the best value without needing to do too, too much replacing? (5v sounds like the best to me)
@GrimmGreen I ordered an eGo from cignot.com and some juice, thanks for all the help answering questions and stuff! I became a member on the ecigarette forums "virtus24" i might have some questions later down the road too, but I'll keep it off youtube for now ;D. Thanks again! Keep on vaping!
nice review, ended up purchasing a v3 from watching your review...thanks! oh here is a easy fix for the spring.... just squeeze the end loop of the spring a tad and it should hold nicely in place
Heh dumbass me, Ive been watching your vids for months now and never subscribed, so there, subscribed. Anyone new to vaping, go ahead and subscribe to Grimm he will help you make a sound choice in your purchases.
i have the v2 with the original dlerin switch. works ok most of the time but the switch is a little picky sometimes. i cross threaded my original 510 adapter so i got a 901 and but one of those small adapters on that to get a 510. what im wondering is if this cross thread issue is resolved with the v3 or should i just get a switch upgrade for my v2 ? any advice anyone?
Nick i think i figured out why the attys i got from ps dont work and the other one that im using does.the ones from ps have shorter threads then the black one that im using.I tried taking the adapter off and flipping it over and tapping the contact post to make it stick out more.Well that didnt work its bottomed out.now im thiking of the carto's from liquidxpress do they have long threads on the attysi posted pictures of the 510 from ps and the 510 that im using in the thread "510 atomizers"
i was thinking about that since im having no luck direct dripping where should i get them at?i want to be able to fill them with the juice i got from ps i wont use any other juice except theirs
@GrimmGreen well hell i'l order a 2 5 packs tomorrow then.i dont understand how 1 510 atty is 10.00 and you can get a 5 pack of carto's for the same thing must be a tiny ass atty in those things thanks Nick and where is my Grimm army decal?lmfao seriously where is it?
@GrimmGreen Nicks i noticed that carto's have that little white donut inside the mouth peice do i push that down?or just pull it out and insert the ziptip?
when i odered my v3 3 weeks ago i got 3 extra ones when i got the unit 3 were d.o.a. and the other one worked for a few days.Casey sent me replacement that i finally got to try today and once again they were all dead.Now im getting alot of shit from other members telling me that im doing something wrong.this is what i do i open and screw them in the adapter put 3 drops in it and nothing happens. i have been vapping&dripping for about 2 months i know about not to flood the atty
@mdrookievaporer the unfortunate side of vaping is that atomizers are still manufactured in china, i have had plenty of "duds" if yours are true joye-510 atomizers then there is not much else you can do.
@mdrookievaporer another option would be to grab some 510 cartos, i have switched over to exclusively using those on all my mods now. better flavor , and no more dripping every 4 puffs. Plus you can get a 5pack for around $10
Nick im not new to vapping or dripping but.......im having issues keeping my 510 attys working that i got from ps where should i get new ones from that will work when i open them and install.i'm getting alot oh shit from people telling me im holding in the bottum too long and frying them.im like fuking hello i screw them in ad 2 drops then nothing its not me its the damn atty's any suggestions?
@mdrookievaporer There is a chance they are not making a proper connection to the 510 adapter. Look at the bottom of the atty, and take a tumbtack and wiggle that center post down a bit. Might help
Ok, check this out...I just got a second V3 in the mail today that was for my gf and used a set of her batteries in miine and the same thing happened with the brand new fully charged batteries. I think something on the V3 itself is shorting out or something, because I have to like back off the cartomizer a bit for it even vape. Is it possib;e that the cartomizer is causing this to happen, or maybe even the spring that I stretched out like hitting something it shouldn't? I'm pretty freaked now!
@2goitalone the problem HAS to be in the cartomizer. As far as i know there is nothing that can short out in the V3 because of the mechanical switch. There are no wires to short out. The problem is either in the batteries or the cartomizer. I have never had to back off any atty or carto to get it to work with the V3. Could just be a bunk carto. Don't freak out , just be careful
@GrimmGreen Yep, it was the carto. It's dead! 6v just seems overkill 2 me. Have u ever tried the Tornado? Know if its any good or not? I haven't seen u review it (unless it's burried somewhere deep in yer 180 + vidz). I have decided to exchange one V3 batts/charger out the P17670, and return the other V3 for a refund or a SB. I'll check the mods you mentioned too. 1 favor please? specialcloves is my friend. She wants 2 know if the WizardStick is available to the public. If so where? Thanks!
@2goitalone the tornado is the same PV as the Janty eGo , you can serch my vids for EGO and find it i think. Amazon sells the Wizard stick for like... $30 i think.
@2goitalone Dude this has been happening to alot of people. Sometimes if you stretch the spring, it can arc over and touch the side of the battery tube and screw things up. The best thing to do is buy the stronger spring or get a medium sized one from a hardware store.
@rbass311 I think they need to refine their design. I bought two of them and I didn't even touch the spring on the second one and it had more problems than the first one that I did stretch the spring on. I really liked the performance of it (for the first two days) of the first one I bought. But afer the second worse than the first 1, I got sick of it and sent it back. They should include a better spring in the 1st place AND make sure there is not way for it to ...screw things up no matter what!
@rbass311... sorry for the typos...drunk and headed for bed...I am happy with my silver bullet for now. Just gotta make sure I stock up on some atomizers. I am done with cartomizers after spending last week in hell with them all burning up scorched black inside, tasting nasty as hell and making me sick to my stomach.
ALSO, to ask that someone "makes sure there's no way for it to screw up NO MATTER WHAT" is asking alot dude. I mean, there's plenty of CARS that SUCK but ppl still spend THOUSANDS of dollars on them.
This is why McDonalds puts the warning on the side of their HOT COFFEE cups. PPL think if they scold themselves it's McDonald's fault!
The V3 has been doing GREAT and most ppl have been VERY HAPPY!
@rbass311 I know quailty when I see/use it, and the V3 was nothing more than a bit of eye candy. Too many pieces that go wrong and to f with cleaning/ adjusting. As for Mc Dnld's and vehicles, well, this has nothing to do with PV battery mods that suck ass. And no one can prove to me they OH SO LOVE THEIR V3's because I've owned two and neither of them worked worth shit for more than two days, the other was COMPLETE GOA. (GARBAGE ON ARRIVAL!)
@2goitalone I just think you don't know shit about what you're doing. You keep screwing shit up they send to you... not their fault. Dumbass. Go get educated and quit dissing a business. Very little can go wrong with the V3 it's PURELY MECHANICAL if you can't figure out how to make it work then you're simple minded and should just give up. User error simple as that. GOA what a joke.
@rbass311 Don't really care what you think bud. I have two Silver Bullets, they work great, they've never misfired and the batteries never get hot and all IT is, is A BATTERY, TUBE AND A SWITCH (and a spring) as well! So go "LMAO and LOL" someplace else!
@2goitalone PS carries the LIFEPO4 which are widely regarded as the best and safest batteries to stack. But they can still be dangerous if you don't know the warning signs.
Ummm...the batteries on my V3 just started getting really warm off of like 3 small vapes....I am pretty sure that's not a good sign. I've only had it for 5 days, wth?
@2goitalone yes, be VERY VERY CAREFUL when stacking any batteries, protected or not. If you ever feel your PV heat up unscrew it as fast as possible and get those batteries out of there. They won't explode , but they will "VENT" which is pretty damn close to exploding, toxic gases will shoot out like crazy everywhere.
@GrimmGreen So discontinue use of them then I presume? It did it once again and I am afraid to use them now? Have you ever had that happen to you? I wish they have a single 5v. I don't like this stacking deal. Do they have a 6v non-stackable?
@2goitalone probably a good idea to not use them anymore. It has happened to me in the past with some CR2 batteries. I still use them , but not very often. There are some mods like the XenoTekk mod and the Nuck Fistpack that uses the 18650 battery and a booster to get to 5v.
@GrimmGreen Hey Grimm, If people like the stiffer spring for the V3 you can get them at Home Depot. It comes in a 84pc assortment pack, made by Everbilt part # is 471 864. There is 4 of them in the pack that work perfect. Even holds on to the plastic around the button so it doesn't fall off when you unscrew the cap off. The tension is right on too!! and no more battery rattle....
@mdrookievaporer Is that what the drip tip thing is? I didn't know what exactly what it was all these guys were using. I didn't want to drip though, I just thought the cartomizers would be great and I guess they just might be, but NOT the ones I GOT FROM V4L...I am going to try 510 Cmizers or a different brand of KR808s. This $#@t has been so confusing that I have already spent like 1 grand trying to figure out the best of the best.
I think the thing gets too hot due to the 6v and the atties simply can't handle it. Where can I get the 3.7v AW17670 battery to make it 3.7v, because that's what I want to do at this point I guess...it is either that or I'm sending it back...or where is a good place to get one. Are they protected.
Oh, btw, I have to shake the crap out of it all the time to make the batteries make contact. Not sure what is causing it, but I tell ya man, I am pissed about all this crap! >_<
@2goitalone Puresmoker sells the AW17670 that fits the V3. They are protected. You can try grabbing your spring in the V3 and giving it a little stretch. That might help the contact issue. Other than that i'm not sure as i have not run into that problem.
6v is intense, the atty WILL get hot. 3drops , 4-5 drags, repeat.
@2goitalone FYI- I had the same problem!!! Easy fix, unscrew the battery contact screw just a little. The one with the alan head. That is it works like a charm now. I thought mine was DOA until I did that. Hope that helps.......
I bought the V3 and have had nothing but problems with it. I was told cartomizers WERE GREAT so I got the V4L ones as suggested and NONE of them even fit my 901/KR808 PureSmoker adapter AND they all tasted like burnt circuitry when I used them on my gf's SB, which they all fit onto her apapter. I am pretty upset as my 901 failed after 4 days. I cannot stand dripping all the time and having to replace atties 20 times a month. It is just too expensive. Got any advice/solutions for my dilemma?
@2goitalone some of the new non Kranger Cartomizers will not fit certain 901 threads. i have run into the same issue. the problem is the cartomizers. As far as the burnt, i'm not sure. i usually use the 510 cartomizer at 6v and it' s amazing. i use the 901 cartomizers at 3.7v. As far as your attys. all i can say is try to keep them wet, and take shorter drags.
Hi, I love your reviews! Thank you for doing them. You videos are really nice, and your audio is spot on. May I ask what video camera you're using or what video camera you recommend? Thank you, Bob
@mdrookievaporer Hey this is Rob from the PS forum. I don't think a V3 can go to 5v I think it's meant for 3.7 and 6. The V2 can. I use the v2 bc I prefer 5v. Go ask ECLIPSE on thePS forum and I THINK (don't quote me) he might know how to add resistance to take it down to 5v I'm not positive though.
@rbass311 i seen him post on there about putting a
Mechanical Switch Contact Disk on the contact post under the adapter but everyone was saying that does not work i might order one and try it for the hell of it
great video grimm! I just bought one tuesday hopefully show up tommorow. Ive been watching your vids for the last year and now its time to upgrade from a 3.7 to an HV device.
i seen a thread late lastnight on ps about that and i took my fat ass right down there and bought one for 16.99 can wait to get my v3 and the other shit and put it in there thanks grimm.....heil grimm
@mdrookievaporer hmmm , not really sure, i know that walgreens and wal-mart both have pretty handy diabetic cases that might work with the V3 , usually mine just goes in my pocket with a bottle of juice for the day.
@mdrookievaporer hey man check out the CASE LOGIC DIABETIC CASES. They have them at almost EVERY Walgreens. This case is PERFECT for a v1,v2,v3 and PLENTY of lil pockets for juice, attys, etc. It's almost as if this case was made to use with it! Go check it out as I've yet to find a better case! $16.00 usd
I stretched out my spring to about two times its normal length and I get no rattling anymore. I love this device man and you know I have many to compare to. Yea that spring is glued into mine now.. A little hot glue on the black part keeps it in place. Can't wait for the ICON! A little noalox on the threads helps keep the button in place a LITTLE better. Yea the V1 was the same way for the left handed logo.... And just remembered about the MJ juice I am sending.ooppsss.. .hhehehe....
Have you tried any of the 2.0 Ohm 510's from Ikenvape yet? My first is going on a month now, granted I eventually removed the little threads under the bridge.
@GrimmGreen Random thought... I'm the guy who recommended Ikenvape's AW 10440's for the Precise to you a few weeks back, and just out of curiousity, how did those work out for you compared to what you were using?
You should be quite pleased with the 2.0 Ohm atties :-)
@TheAlmightyFSM OH! so... they actually did not work at all , the Precise uses the protected 10440 , and the AW 10440 was a touch to short. it didn't make contact with both the top and bottom. kind of rattled around. no biggie. the AW's work awesome on both the cisco lazer and the Janty Stick.
@GrimmGreen Huh... son of a bitch... Oh well, I'm glad you have other devices to put em in and that I didn't stear you too wrong. I've never had a precise but I assumed a protected 10440 is a protect 10440 no matter who makes it, you know? lol
I bought the V3 after i saw your first video. man what a nice, solidly built PV. All stainless, virtually indestructible, i feel like this PV is what the Terminator would vape with. Incredible hits of vapor too. Thanks for your awsome reviews!
@092275erik o... stretching the spring workes great i did that and my batteries does not rattle and it also seems to work even better. thanks for the tip.
@MrGneiss THANKS! it's not %100 what i had envisioned but i'm super stoked on how it's shaping up for sure. Remember everyone can contribute to the site, so feel free to submit any relevant articles, news, pictures or videos!
WTF, no size comparison? You're slipping, Grimm. Would have been nice to see it compared to the BB, Mako. And as a another comment said, just put tape on the 3v batts to stop the rattle. (or a GrimmGreen sticker!) Also, just hold the top of the switch assembly when you unlock it if you are having problems with it unscrewing it from the tube...Thanks for continuing to put out rad videos!
Hey Grimm the heavy spring does stop the rattle most of the time and it does not fall out when changing the batteries. The one think I have noticed on accident if you drop it from a good height is that if it falls right on the switch it will dent the batteries and they won't work very well. The other thing is that the 510 cartamizers I got from ecigsupply do not work screw on very well if you work it on and off you can get it to though.
Nice follow up review! Just wanted to touch on the spring/rattling battery issue. See this thread on a great perfect fitting medium spring a guy found at home depot.
It will fix every issue you have with the V3.. No more rattling batteries, the spring will hold/grip the black plastic disk and it the press is a hare firmer then the stretched light spring and alot less then if you had the heavy spring. PS really needs to find somewhere to buy up these meduim springs..
Hey Grimm! the bottom mounted switch is just awesome but the rattle would probly drive me crazy lol. I would be constantly trying to fix it and would never stop either. but the V3 is a nice device that I wouldnt mind having...
@rbass311 i seriously wouldnt be able to smoke it by itself? crap i just ordered a 36mg of menthol from TW lol im gonna do it anyways haha stressful job
@tk423b I'm pretty sure that the width of batts is a problem rather than a lenght. That's why the 17670 batt doesn't rattle. I would think that adding length with a spacer would also make the soft spring feel even stiffer.
As always, nice review! I just received my V3 Friday and it is AWESOME! I don't think that it gets any better for 83 bucks. Btw, using two AW LifePO4 batts instead of Tenergies fro 6V almost eliminates any rattling, I think AWs are a little wider. The heavy spring will give you a workout lol, it's almost too much. The button is so nice!
How long would you say the batteries last? I don't remember you saying so earlier.
bboy0465 1 month ago
@bboy0465 the stacked RCR123a batteries get about 5ish hours, not amazing, but not to bad either
GrimmGreen 1 month ago
I have a 3.1 and the batteries don't rattle. I love it.
awsczxfr 3 months ago
Hi Girmmgreen:
I am new to vaping, and after looking through your vids and others I thinking the Prodigy V 3.1 with the 6 volt from puresmoke. However, so many people are in love w/ the silver bullet. So what would you choose if you where going to buy today?
pdt1212 4 months ago
@pdt1212 Well... I have 3 silver bullets and one prodigy , Kinda speaks for itself, the SB uses a bigger longer lasting battery. The Prodigy is good, it has a bottom button which some people don't like.
GrimmGreen 4 months ago
i love this mod but it kills atomizers left and right i cant seem to get a 510 atty to last more then 2 days on average shortest time i have gotten off of one was about 20 minutes and longest was 5 days maybe a week and carto's almost as bad, what am i doing wrong ? i had to quit vaping because it was costing to much for new atty's and i had to go back to analogs because i had to wait for new atty's every few days what can i do to fix this issue ?
randomnoone 5 months ago
@randomnoone It's strange only because I have never, in almost 3 years, killed an atty like that. Are you running 3.7v or 6v ? maybe check the atty connection and make sure it's getting a snug fit with the connection on the V3
GrimmGreen 5 months ago
@GrimmGreen 6v yea i tried many variations of tight and lose and it just pops them at random i think they were good attys i got them from puresmoker don't think they where super cheap attys or anything and tried 2 or 3 from other vendors seemed to suck just as much
randomnoone 5 months ago
Come on grimm......!!!when is the Provari review coming bud???? Love your vids and hope to see that one soon..
threeamax 5 months ago
Is vaping @ 3.7V with a LR 306 better than vaping @6V with a HR 306?
gyzmopr 6 months ago
@gyzmopr just my opinion.... yes... and safer if you're not stacking batteries
GrimmGreen 6 months ago
have you considered adding an extra small spring (preferably coated) at the positive pole to get rid of the rattle?
Germaniac2 6 months ago
I am interested in buying my first mod and really need one that will last. I saw your vid on the MAP tank and would love to try one out but am not sure what the best mod to buy would be to use with both the MAP tank as well as a 510 atty when I want to manually drip. any suggestions? thanks in advance and thank you for your videos they are extremely helpful!
punkrocgirlie1 9 months ago
@punkrocgirlie1 For the MAP tank to work on a mod , you need a mod with a flat top , like the SilverBullet or the Bombshell , any mod with a "Juice catch" will not play nice with the MAP tank
GrimmGreen 9 months ago
i have found a nice silver contact RN4081 or what ev the number is the one that comes on njoy smoking every where mini etc. from logic ecigs. com and it says non rechargeable but it is. and the cartomizer is really awesome try it out for eleven dollars awesome.
graffsucks 10 months ago
You may have already figured out how to stop the battery rattling, but if not that neodyme magnet spacer works like a charm i shake the v3 and there is NO movement inside the chamber. so if you still have this problem go to vaporkings and grab the magnet its great. I use it in my GGTS as well and it is the tits! funny thing is i spent an arm and a leg on the GG and the prodigy performs just as nice and is a far more simple device, son of a b**ch! be good man always a pleasure
TheNewLushLife 10 months ago
Hey grim lush here, love your videos you've given me some good advice in the past so I am here to return the favor. I see your one issue with the prodigy v3 is the rattling of batteries when using 2 LiFep04 batts. I have a prodigy v3.1 and had the same issue. so I went on the vaporkings site and purchased a neodyme magnet batt spacer. its like a 10th of an inch thick, it sits between my two LiFep04's and the rattling is GONE. it makes them fit snug as hell.
TheNewLushLife 10 months ago
I have the same experience with LR attys. I get two weeks if I'm lucky and I vape atty-friendly juice. Otherwise, I can count on burning one up in a week like clockwork. Still my favorite vape. 5v didn't work for me, I just couldn't get past the burnt taste it gave all my juice, so LR is the devil I live with.
Vapenstein 11 months ago
should I get the 510 or the 801 version of this model? can you explain the differences please?
majikskittles420 11 months ago
@majikskittles420 depends on what attys you like using, i like the 510 atty, so i got the 510 connection
GrimmGreen 11 months ago
Comment removed
majikskittles420 11 months ago
Hands down the best cartomizers to use with the prodigy are standard 510's from electro-nic-stix. CONSISTANT=key word.
jnoviczski 1 year ago
the 510 atty they gave me blew in 2 hours and i poped 3 more that day and have gone through 6 of there cartos this week wheres the best place to buy 510 atty's to use with the v3 ?
randomnoone 1 year ago
it slides in and out really well , that's what SHE said ROFL
randomnoone 1 year ago
@Vapethis I know right. I have a bloog, and just ordered my v3.1. I can't wait O_O. My bro has an omega which is a beast so I'm ready to join the big boys club.
Jnymack123 1 year ago
Fuuck, I just realised that puresmoker doesn't ship to Europe, damnn. Or am I wrong?
petterfurb 1 year ago
What Brand Cartomizers are you using. I tried using Bogen 510 Softcaps and blew all of them using the V3.1 6 Volt. Also blew 1 510 atomizer from Totally WIcked. So now all I am using is the atomizer that Puresmoke sells and a drip tip. But I would like to use a cartomzer.
dananoah 1 year ago
@Vapethis well, They can both do 3.7 and 6v, the SilverBullet is easily if not THE most proven / tried and true PV's on the market. The v3 is awesome , but the bottom button might put some people off
GrimmGreen 1 year ago
You said you're using a 510 cartomizer at some point during the video. I order my V3 with a 510 adapter, but I wasn't sure if I could just order some refillable atomizers for the ace, or if I needed to order a special adapter in order for the atomizer to fit. Also was wondering if you think it would be more cost efficient to vape only out of cartomizers since they're a buck each. Using them with the ace, the flavor isn't as good, nor is the vapor production. What do you recommend?
blindsk8r490 1 year ago
@blindsk8r490 so i was using a 510 cartomizer in this video, it's much different than the Ace cartoz that puresmoker sells. the 901 connection for the V3 should fit the Ace carto that PS sells. I haven't had much luck with the Ace cartoz at high volt. 510 cartoz seem to perform much better IMO
GrimmGreen 1 year ago
I currently have a BluCig.. It's awful, I was wondering if this would be a good replacement kind of thing? I smoke around a pack a day and I'm really wanting to go with e cigs to quit buying cigs.. Any Suggestions?
dscarrillo24 1 year ago
@dscarrillo24 Compared to the BLUcig the V3 is a BEAST , it runs and nearly double the voltage, and will be MUCH bigger in size. Something like the Janty eGo or the TotallyWicked Tornado might be more your speed right now.
GrimmGreen 1 year ago
@GrimmGreen From the standpoint of money, which of your 510's would you suggest getting as the best value without needing to do too, too much replacing? (5v sounds like the best to me)
dscarrillo24 1 year ago
@dscarrillo24 5v , something like the Buzz, the GLV2 , or the TekkMod are all solid , reliable PV's
GrimmGreen 1 year ago
Comment removed
dscarrillo24 1 year ago
@GrimmGreen I ordered an eGo from cignot.com and some juice, thanks for all the help answering questions and stuff! I became a member on the ecigarette forums "virtus24" i might have some questions later down the road too, but I'll keep it off youtube for now ;D. Thanks again! Keep on vaping!
dscarrillo24 1 year ago
nice review, ended up purchasing a v3 from watching your review...thanks! oh here is a easy fix for the spring.... just squeeze the end loop of the spring a tad and it should hold nicely in place
xpander37 1 year ago
Heh dumbass me, Ive been watching your vids for months now and never subscribed, so there, subscribed. Anyone new to vaping, go ahead and subscribe to Grimm he will help you make a sound choice in your purchases.
realdad32 1 year ago
i have the v2 with the original dlerin switch. works ok most of the time but the switch is a little picky sometimes. i cross threaded my original 510 adapter so i got a 901 and but one of those small adapters on that to get a 510. what im wondering is if this cross thread issue is resolved with the v3 or should i just get a switch upgrade for my v2 ? any advice anyone?
realdad32 1 year ago
@realdad32 Hmmm , possibly.... the adapters are stainless steel now as opposed to the brass of the V2.
GrimmGreen 1 year ago
Nick i think i figured out why the attys i got from ps dont work and the other one that im using does.the ones from ps have shorter threads then the black one that im using.I tried taking the adapter off and flipping it over and tapping the contact post to make it stick out more.Well that didnt work its bottomed out.now im thiking of the carto's from liquidxpress do they have long threads on the attysi posted pictures of the 510 from ps and the 510 that im using in the thread "510 atomizers"
mdrookievaporer 1 year ago
i was thinking about that since im having no luck direct dripping where should i get them at?i want to be able to fill them with the juice i got from ps i wont use any other juice except theirs
mdrookievaporer 1 year ago
@mdrookievaporer i get blanks from liquidxpress(dot)com
GrimmGreen 1 year ago
@GrimmGreen Nick can i use my ziptip with carto's?
mdrookievaporer 1 year ago
@mdrookievaporer yeah totally , it's the only way to vape, makes it super easy to re-fill the cartoz on the fly as well.
GrimmGreen 1 year ago
@GrimmGreen well hell i'l order a 2 5 packs tomorrow then.i dont understand how 1 510 atty is 10.00 and you can get a 5 pack of carto's for the same thing must be a tiny ass atty in those things thanks Nick and where is my Grimm army decal?lmfao seriously where is it?
mdrookievaporer 1 year ago
@GrimmGreen Nicks i noticed that carto's have that little white donut inside the mouth peice do i push that down?or just pull it out and insert the ziptip?
mdrookievaporer 1 year ago
when i odered my v3 3 weeks ago i got 3 extra ones when i got the unit 3 were d.o.a. and the other one worked for a few days.Casey sent me replacement that i finally got to try today and once again they were all dead.Now im getting alot of shit from other members telling me that im doing something wrong.this is what i do i open and screw them in the adapter put 3 drops in it and nothing happens. i have been vapping&dripping for about 2 months i know about not to flood the atty
mdrookievaporer 1 year ago
a guy on pure-smoker told me to do that i did and they still dont work.where can i get the attys that have the center post that extends out some?
mdrookievaporer 1 year ago
@mdrookievaporer the unfortunate side of vaping is that atomizers are still manufactured in china, i have had plenty of "duds" if yours are true joye-510 atomizers then there is not much else you can do.
GrimmGreen 1 year ago
@mdrookievaporer another option would be to grab some 510 cartos, i have switched over to exclusively using those on all my mods now. better flavor , and no more dripping every 4 puffs. Plus you can get a 5pack for around $10
GrimmGreen 1 year ago
Nick im not new to vapping or dripping but.......im having issues keeping my 510 attys working that i got from ps where should i get new ones from that will work when i open them and install.i'm getting alot oh shit from people telling me im holding in the bottum too long and frying them.im like fuking hello i screw them in ad 2 drops then nothing its not me its the damn atty's any suggestions?
mdrookievaporer 1 year ago
@mdrookievaporer There is a chance they are not making a proper connection to the 510 adapter. Look at the bottom of the atty, and take a tumbtack and wiggle that center post down a bit. Might help
GrimmGreen 1 year ago
Ok, check this out...I just got a second V3 in the mail today that was for my gf and used a set of her batteries in miine and the same thing happened with the brand new fully charged batteries. I think something on the V3 itself is shorting out or something, because I have to like back off the cartomizer a bit for it even vape. Is it possib;e that the cartomizer is causing this to happen, or maybe even the spring that I stretched out like hitting something it shouldn't? I'm pretty freaked now!
2goitalone 1 year ago
@2goitalone the problem HAS to be in the cartomizer. As far as i know there is nothing that can short out in the V3 because of the mechanical switch. There are no wires to short out. The problem is either in the batteries or the cartomizer. I have never had to back off any atty or carto to get it to work with the V3. Could just be a bunk carto. Don't freak out , just be careful
GrimmGreen 1 year ago
@GrimmGreen Yep, it was the carto. It's dead! 6v just seems overkill 2 me. Have u ever tried the Tornado? Know if its any good or not? I haven't seen u review it (unless it's burried somewhere deep in yer 180 + vidz). I have decided to exchange one V3 batts/charger out the P17670, and return the other V3 for a refund or a SB. I'll check the mods you mentioned too. 1 favor please? specialcloves is my friend. She wants 2 know if the WizardStick is available to the public. If so where? Thanks!
2goitalone 1 year ago
@2goitalone the tornado is the same PV as the Janty eGo , you can serch my vids for EGO and find it i think. Amazon sells the Wizard stick for like... $30 i think.
GrimmGreen 1 year ago
@GrimmGreen Much appreciated, thanks for all the info man!
2goitalone 1 year ago
@2goitalone Dude this has been happening to alot of people. Sometimes if you stretch the spring, it can arc over and touch the side of the battery tube and screw things up. The best thing to do is buy the stronger spring or get a medium sized one from a hardware store.
rbass311 1 year ago
@rbass311 I think they need to refine their design. I bought two of them and I didn't even touch the spring on the second one and it had more problems than the first one that I did stretch the spring on. I really liked the performance of it (for the first two days) of the first one I bought. But afer the second worse than the first 1, I got sick of it and sent it back. They should include a better spring in the 1st place AND make sure there is not way for it to ...screw things up no matter what!
2goitalone 1 year ago
@rbass311... sorry for the typos...drunk and headed for bed...I am happy with my silver bullet for now. Just gotta make sure I stock up on some atomizers. I am done with cartomizers after spending last week in hell with them all burning up scorched black inside, tasting nasty as hell and making me sick to my stomach.
2goitalone 1 year ago
@2goitalone burning up and scorched inside?
This might be user error bro.
ALSO, to ask that someone "makes sure there's no way for it to screw up NO MATTER WHAT" is asking alot dude. I mean, there's plenty of CARS that SUCK but ppl still spend THOUSANDS of dollars on them.
This is why McDonalds puts the warning on the side of their HOT COFFEE cups. PPL think if they scold themselves it's McDonald's fault!
The V3 has been doing GREAT and most ppl have been VERY HAPPY!
rbass311 1 year ago
@rbass311 I know quailty when I see/use it, and the V3 was nothing more than a bit of eye candy. Too many pieces that go wrong and to f with cleaning/ adjusting. As for Mc Dnld's and vehicles, well, this has nothing to do with PV battery mods that suck ass. And no one can prove to me they OH SO LOVE THEIR V3's because I've owned two and neither of them worked worth shit for more than two days, the other was COMPLETE GOA. (GARBAGE ON ARRIVAL!)
2goitalone 1 year ago
@2goitalone I just think you don't know shit about what you're doing. You keep screwing shit up they send to you... not their fault. Dumbass. Go get educated and quit dissing a business. Very little can go wrong with the V3 it's PURELY MECHANICAL if you can't figure out how to make it work then you're simple minded and should just give up. User error simple as that. GOA what a joke.
LMAO IT'S A BATTERY TUBE AND A SWITCH LOL
rbass311 1 year ago
@rbass311 Don't really care what you think bud. I have two Silver Bullets, they work great, they've never misfired and the batteries never get hot and all IT is, is A BATTERY, TUBE AND A SWITCH (and a spring) as well! So go "LMAO and LOL" someplace else!
2goitalone 1 year ago
@2goitalone Maybe you should just give the V3 to your gf instead of trying to "fix it for her" and maybe it wouldn't screw up for her tough guy
rbass311 1 year ago
This has been flagged as spam show
@rbass311 All of you people probably work for PS and I trust none of you! User ERROR MY ASS! Sounds all too much like company affliate lingo to me!
2goitalone 1 year ago
Is there a better place to get batteries other than PS? I mean like any better quality ones?
2goitalone 1 year ago
@2goitalone PS carries the LIFEPO4 which are widely regarded as the best and safest batteries to stack. But they can still be dangerous if you don't know the warning signs.
GrimmGreen 1 year ago
caught your vapefest2010 vids,good job as usual.please tell me where i can obtain one of those wizard sticks.it was totally blowin'!!! got 2 have.
specialcloves 1 year ago
Typos...sorry!
2goitalone 1 year ago
Ummm...the batteries on my V3 just started getting really warm off of like 3 small vapes....I am pretty sure that's not a good sign. I've only had it for 5 days, wth?
Could they explode on me? 0_o
2goitalone 1 year ago
@2goitalone yes, be VERY VERY CAREFUL when stacking any batteries, protected or not. If you ever feel your PV heat up unscrew it as fast as possible and get those batteries out of there. They won't explode , but they will "VENT" which is pretty damn close to exploding, toxic gases will shoot out like crazy everywhere.
GrimmGreen 1 year ago
@GrimmGreen So discontinue use of them then I presume? It did it once again and I am afraid to use them now? Have you ever had that happen to you? I wish they have a single 5v. I don't like this stacking deal. Do they have a 6v non-stackable?
2goitalone 1 year ago
@2goitalone probably a good idea to not use them anymore. It has happened to me in the past with some CR2 batteries. I still use them , but not very often. There are some mods like the XenoTekk mod and the Nuck Fistpack that uses the 18650 battery and a booster to get to 5v.
GrimmGreen 1 year ago
@GrimmGreen Hmmm, I see...I'll have to check them out then...thanks!
2goitalone 1 year ago
I bought the full kit, worth every penny. I can't see ever replacing it. Battery life is great and very strong/warm hits with a 510 atomizer.
djdramatikk 1 year ago
And what is a ziptip?
2goitalone 1 year ago
@2goitalone they are small stainless steel , or plastic tips that go on the atomizer, to be used as a mouthpiece.
GrimmGreen 1 year ago
@GrimmGreen Hey Grimm, If people like the stiffer spring for the V3 you can get them at Home Depot. It comes in a 84pc assortment pack, made by Everbilt part # is 471 864. There is 4 of them in the pack that work perfect. Even holds on to the plastic around the button so it doesn't fall off when you unscrew the cap off. The tension is right on too!! and no more battery rattle....
MrCwk553 1 year ago
@MrCwk553 very cool! thanks for the info, this will help a lot of people out!
GrimmGreen 1 year ago
@2goitalone if your going to drip you should really get one.you drip right throught it insteand of taking the mouth peice off
mdrookievaporer 1 year ago
@mdrookievaporer Is that what the drip tip thing is? I didn't know what exactly what it was all these guys were using. I didn't want to drip though, I just thought the cartomizers would be great and I guess they just might be, but NOT the ones I GOT FROM V4L...I am going to try 510 Cmizers or a different brand of KR808s. This $#@t has been so confusing that I have already spent like 1 grand trying to figure out the best of the best.
2goitalone 1 year ago
@mdrookievaporer where is a good place to pick one up ....I want a stainless steel one.
2goitalone 1 year ago
@mdrookievaporer Thanks, I'll pick some up...was pretty sure I had seen some of thos in some vids, but wasn't for certain exactly what they were.
2goitalone 1 year ago
I think the thing gets too hot due to the 6v and the atties simply can't handle it. Where can I get the 3.7v AW17670 battery to make it 3.7v, because that's what I want to do at this point I guess...it is either that or I'm sending it back...or where is a good place to get one. Are they protected.
Oh, btw, I have to shake the crap out of it all the time to make the batteries make contact. Not sure what is causing it, but I tell ya man, I am pissed about all this crap! >_<
2goitalone 1 year ago
@2goitalone Puresmoker sells the AW17670 that fits the V3. They are protected. You can try grabbing your spring in the V3 and giving it a little stretch. That might help the contact issue. Other than that i'm not sure as i have not run into that problem.
6v is intense, the atty WILL get hot. 3drops , 4-5 drags, repeat.
GrimmGreen 1 year ago
@GrimmGreen If I get the Aw 17670, will it work ok without low resistance atties and will it perform well with say...510 cartomizers?
2goitalone 1 year ago
@2goitalone it works solid with a standard 510 atty, vapes like regular 3.7v.
GrimmGreen 1 year ago
@2goitalone ya cn get them from pure-smoker
mdrookievaporer 1 year ago
@2goitalone FYI- I had the same problem!!! Easy fix, unscrew the battery contact screw just a little. The one with the alan head. That is it works like a charm now. I thought mine was DOA until I did that. Hope that helps.......
MrCwk553 1 year ago
@MrCwk553 I tried that and everything inbetween...cleaning ect.
Nothing works except for jiggling and tapping it around til it begins hitting again.
But thanks anyway.
2goitalone 1 year ago
I bought the V3 and have had nothing but problems with it. I was told cartomizers WERE GREAT so I got the V4L ones as suggested and NONE of them even fit my 901/KR808 PureSmoker adapter AND they all tasted like burnt circuitry when I used them on my gf's SB, which they all fit onto her apapter. I am pretty upset as my 901 failed after 4 days. I cannot stand dripping all the time and having to replace atties 20 times a month. It is just too expensive. Got any advice/solutions for my dilemma?
2goitalone 1 year ago
@2goitalone some of the new non Kranger Cartomizers will not fit certain 901 threads. i have run into the same issue. the problem is the cartomizers. As far as the burnt, i'm not sure. i usually use the 510 cartomizer at 6v and it' s amazing. i use the 901 cartomizers at 3.7v. As far as your attys. all i can say is try to keep them wet, and take shorter drags.
GrimmGreen 1 year ago
@GrimmGreen Where do you get your 510 cartos or Kranger's er whatever?
2goitalone 1 year ago
@2goitalone i get mine from liquidxpress(dot)com
GrimmGreen 1 year ago
Hi, I love your reviews! Thank you for doing them. You videos are really nice, and your audio is spot on. May I ask what video camera you're using or what video camera you recommend? Thank you, Bob
BobMars1260 1 year ago
@BobMars1260 Certainly, i actually use a Kodak Zi6 camera for all my videos , it's pretty cool, not amazing , but it shoots up to 720p.
GrimmGreen 1 year ago
@GrimmGreen Thank you so much for the guidance! :)
BobMars1260 1 year ago
Doesn't NOALAX sound like a biblical laxative?
rbass311 1 year ago
@grimmgreen how do you get the v3 to go to 5 volts i hear thats the sweet spot for this unit whats up ?
mdrookievaporer 1 year ago
@mdrookievaporer Hey this is Rob from the PS forum. I don't think a V3 can go to 5v I think it's meant for 3.7 and 6. The V2 can. I use the v2 bc I prefer 5v. Go ask ECLIPSE on thePS forum and I THINK (don't quote me) he might know how to add resistance to take it down to 5v I'm not positive though.
rbass311 1 year ago
@rbass311 i seen him post on there about putting a
Mechanical Switch Contact Disk on the contact post under the adapter but everyone was saying that does not work i might order one and try it for the hell of it
mdrookievaporer 1 year ago
great video grimm! I just bought one tuesday hopefully show up tommorow. Ive been watching your vids for the last year and now its time to upgrade from a 3.7 to an HV device.
rootcon 1 year ago
i seen a thread late lastnight on ps about that and i took my fat ass right down there and bought one for 16.99 can wait to get my v3 and the other shit and put it in there thanks grimm.....heil grimm
mdrookievaporer 1 year ago
where can i get a carrying case for the v3?
mdrookievaporer 1 year ago
@mdrookievaporer hmmm , not really sure, i know that walgreens and wal-mart both have pretty handy diabetic cases that might work with the V3 , usually mine just goes in my pocket with a bottle of juice for the day.
GrimmGreen 1 year ago
@mdrookievaporer hey man check out the CASE LOGIC DIABETIC CASES. They have them at almost EVERY Walgreens. This case is PERFECT for a v1,v2,v3 and PLENTY of lil pockets for juice, attys, etc. It's almost as if this case was made to use with it! Go check it out as I've yet to find a better case! $16.00 usd
rbass311 1 year ago
@rbass311 i got it its perfect for it. i can leave the atty and ziptip on it slide it in and zip it closed and it works fine
mdrookievaporer 1 year ago
I stretched out my spring to about two times its normal length and I get no rattling anymore. I love this device man and you know I have many to compare to. Yea that spring is glued into mine now.. A little hot glue on the black part keeps it in place. Can't wait for the ICON! A little noalox on the threads helps keep the button in place a LITTLE better. Yea the V1 was the same way for the left handed logo.... And just remembered about the MJ juice I am sending.ooppsss.. .hhehehe....
vapnaway 1 year ago
Have you tried any of the 2.0 Ohm 510's from Ikenvape yet? My first is going on a month now, granted I eventually removed the little threads under the bridge.
TheAlmightyFSM 1 year ago
@TheAlmightyFSM YES!! well , not yet , but they are in the mail as we speak!
GrimmGreen 1 year ago
@GrimmGreen Random thought... I'm the guy who recommended Ikenvape's AW 10440's for the Precise to you a few weeks back, and just out of curiousity, how did those work out for you compared to what you were using?
You should be quite pleased with the 2.0 Ohm atties :-)
TheAlmightyFSM 1 year ago
@TheAlmightyFSM OH! so... they actually did not work at all , the Precise uses the protected 10440 , and the AW 10440 was a touch to short. it didn't make contact with both the top and bottom. kind of rattled around. no biggie. the AW's work awesome on both the cisco lazer and the Janty Stick.
GrimmGreen 1 year ago
@GrimmGreen Huh... son of a bitch... Oh well, I'm glad you have other devices to put em in and that I didn't stear you too wrong. I've never had a precise but I assumed a protected 10440 is a protect 10440 no matter who makes it, you know? lol
Keep up the good work buddy!
TheAlmightyFSM 1 year ago
I bought the V3 after i saw your first video. man what a nice, solidly built PV. All stainless, virtually indestructible, i feel like this PV is what the Terminator would vape with. Incredible hits of vapor too. Thanks for your awsome reviews!
chino112582 1 year ago
Those 510 Cartomizers really cook at 6 volts don't they. Great video, I wish I was in the market for a new device because the prodigy looks nice.
gotthelife4u 1 year ago
good video your right about how the switch turnes when you unlock it. mine does the samething. the v3 is awsome.
092275erik 1 year ago
@092275erik o... stretching the spring workes great i did that and my batteries does not rattle and it also seems to work even better. thanks for the tip.
092275erik 1 year ago
Wow, the website is looking good!!
MrGneiss 1 year ago
@MrGneiss THANKS! it's not %100 what i had envisioned but i'm super stoked on how it's shaping up for sure. Remember everyone can contribute to the site, so feel free to submit any relevant articles, news, pictures or videos!
GrimmGreen 1 year ago
WTF, no size comparison? You're slipping, Grimm. Would have been nice to see it compared to the BB, Mako. And as a another comment said, just put tape on the 3v batts to stop the rattle. (or a GrimmGreen sticker!) Also, just hold the top of the switch assembly when you unlock it if you are having problems with it unscrewing it from the tube...Thanks for continuing to put out rad videos!
NnyletaKssiM 1 year ago
@NnyletaKssiM ouch, maybe i am slipping... i'll do a few size comparisons and put the links in the description ok?
GrimmGreen 1 year ago
Hey Grimm the heavy spring does stop the rattle most of the time and it does not fall out when changing the batteries. The one think I have noticed on accident if you drop it from a good height is that if it falls right on the switch it will dent the batteries and they won't work very well. The other thing is that the 510 cartamizers I got from ecigsupply do not work screw on very well if you work it on and off you can get it to though.
eloc187 1 year ago
Nice follow up review! Just wanted to touch on the spring/rattling battery issue. See this thread on a great perfect fitting medium spring a guy found at home depot.
VaporEclypse 1 year ago
Search for Medium Spring on PS's forum.
It will fix every issue you have with the V3.. No more rattling batteries, the spring will hold/grip the black plastic disk and it the press is a hare firmer then the stretched light spring and alot less then if you had the heavy spring. PS really needs to find somewhere to buy up these meduim springs..
VaporEclypse 1 year ago
@VaporEclypse nice , i'll have to look into that , thanks for the info buddy
GrimmGreen 1 year ago
If and when I get my first mod, I think this will be one of my first choices :)
Ceryni 1 year ago
Grimm, can the 17670 batt fit in the Copper?
bar95900 1 year ago
@bar95900 no the 17670 is far to long for the copper :(
GrimmGreen 1 year ago
Nice vid Grimm, and I love your website. The Grimm Army rocks!!!
VaperSteve1975 1 year ago
@VaperSteve1975 WHOO HOO!! GrimmArmy! , we might have t-shirts soon... just sayin :)
GrimmGreen 1 year ago
This has been flagged as spam show
So far for me I found the best Mod. The GG Telescopic Storm it kicks ass!!
AnilomNor 1 year ago
@AnilomNor Dude! i still need to get my hands on one of those... gahhh... not enough money ever lol
GrimmGreen 1 year ago
Hey Grimm! the bottom mounted switch is just awesome but the rattle would probly drive me crazy lol. I would be constantly trying to fix it and would never stop either. but the V3 is a nice device that I wouldnt mind having...
MrSwagman51 1 year ago
Grimm how is the USB working out I just ordered one last week and should be getting it soon.
houndog97 1 year ago
do you get a buzz with any e smoking device or e liquid.... would 36mg nicotine juice give me a buzz?
xnf90x2 1 year ago
@xnf90x2 LOL YEAH 36 would give you a buzz... in fact that's about as strong as it gets...
I usually go by this:
6-ultra lights cig
8-10 lights cig
12-16 full flavor
18-24 no filter
36 is usually used to mix into more dilute solutions and isn't made to smoke by itself... don't do it!
rbass311 1 year ago
@rbass311 i seriously wouldnt be able to smoke it by itself? crap i just ordered a 36mg of menthol from TW lol im gonna do it anyways haha stressful job
xnf90x2 1 year ago
@xnf90x2 Try this and you'll have twice as much e liquid at a strength you can actually breathe in lol:
Go to Walmart and spend around 4 dollars on Glycerine.
mix equal parts Glycerine and 36 mg nic to get an 18 mg solution which will be as strong as a full flavor cigarette.
Then you'll have twice the amount of e liquid and then vape away!
rbass311 1 year ago
@xnf90x2 yeah what rbass said , you will probably get a buzz and get sick. i wouldn't vape 36mg all day every day.
GrimmGreen 1 year ago
nice pv..rattles drive me crazy..ha
meyiyiyi55 1 year ago
yea a left handed device...lol..great vid.
CanAsianada 1 year ago
The video is new... HD won't show up for like... an hour or more if there is hd.. But anyway, Nice Review!
Zeybrin 1 year ago
@Zeybrin Thanks!! hopefully the HD shows up soon lol
GrimmGreen 1 year ago
Grimm did you ever get all bs "ironed out" with ECF?? ha ha
rbass311 1 year ago
@rbass311 not exactly , ECF admin contacted me and want to speak with me on the phone. i haven't had time to call them back yet.
GrimmGreen 1 year ago
you could pick up a magnetic battery spacer to fix that rattle, that way you keep the soft spring.
tk423b 1 year ago
@tk423b I'm pretty sure that the width of batts is a problem rather than a lenght. That's why the 17670 batt doesn't rattle. I would think that adding length with a spacer would also make the soft spring feel even stiffer.
love2vape 1 year ago
@love2vape couple of wraps of electrical tape will do the trick then
tk423b 1 year ago
@tk423b yeah i don't know, as it stands the switch has almost zero travel room in there. i think a spacer might make it constantly fire.
GrimmGreen 1 year ago
As always, nice review! I just received my V3 Friday and it is AWESOME! I don't think that it gets any better for 83 bucks. Btw, using two AW LifePO4 batts instead of Tenergies fro 6V almost eliminates any rattling, I think AWs are a little wider. The heavy spring will give you a workout lol, it's almost too much. The button is so nice!
love2vape 1 year ago
kinda nice vid... would be better in HD... lol... im loving my 5v mod... afraid to try 6v till this gets old... lol...
rockruleslp 1 year ago
great review as always, but stop making me want to spend more money! ^_~
vip0802 1 year ago
This may work for me, I am constantly resting sodas on my PV.
cabrerarob 1 year ago
No HD?!
SvB4EvA 1 year ago