deine spulen sehen so komisch aus....kannst du mir irgendwie zukommen lassen wie du die gebaut hast und auch schaltplan mit den drei spulen? falls email oder skype gern per PN
Hi, i want to know how much amps my moter is using how do I do this. So the red lead from the meter gos to positive on the battery what about the black lead
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
Hello , I'm letting go of my personal copy of energy from the vacuum DVD part 2 , part 6 ,part 12 ,and part 20 on '' eBay '' for a discount thank you
if one magnet would get free at 10 degrees angle aimed to your head which means by 1/36 chance at 1.29, you would be killed by your own design. Be sceptical. At least little.
sorry, i'm knew to the idea of bedini cirquit, but how is this suppsoed to work? the magnets are attracted to some sort of metal inside the coil, making them spin when it gets close, but there's too much motion, to it goes past? or is the electricity drawn from the magnets helping the magnetets push past, continuing the cycle? please reply.
hey there @querdenker79 i though of an idea on how to give you some extra power in this design, " static electricity" rig up a whool winter hat and a rubber band or baloon somehow should work good. Just an idea
I wonder if it may help to inset the magnets into the plastic so the edges of the magnets are the same as the edge of the plastic. I don't know.... Just an idea! good luck!
Wow die meisten Menschen tun das kühle Hochgeschwindigkeitsspinnen Magnete sind Deutsch, verstehe ich nicht Deutsch, ich spreche hier nur auf Deutsch, weil ich mit Google übersetzen bin. Sie haben ein sehr guter Mechanismus machte auch!
Free inexhaustible energy is real!But the Oil companies want these technologies unknown to the masses,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,The revolution begins!
I invented a breakthrough energy source that contradicts the law of energy conservation. I have a PROOF that there are electrodynamic phenomena that contradict the law of energy conservation. I am looking for $300 000 for a prototype and for $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of energy produced yearly $5400.
Have u tried to invert the principle, and try to generate power with it? In theory, correct me if I'm wrong, a triple coil would output triple the amount.
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and for $3M for patents. Making a 15 kW generator will cost $1200 in mass production, value of the energy produced yearly about $10 000.
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of the energy produced per year $5400.
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of the energy produced per year $5400.
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
I make motor controllers for electric cars, and the most common question I get is, "Can you just hook up a fan or something to recharge the batteries while the car moves?" Is conservation of energy really that hard to understand? Negative energy? What in the heck is that? I'm so sick of this stupid crap.
mijdtr Sure the bedini circuit works but it does Not generate overunity. It runs as a motor but thats no big deal. The guy was talking about a magnetic monopole, thats a hypothetical particle where there would be a South pole with no north pole. jus so u know. Do you have one of these bedini motors powering you house???
A HDD bearing setup is designed to spin at 5400-15000 rpm which is within the range of the bedini circuit. Floating sphere magnets (inside an copper coil, where the steel should go) spin with minimal resistance and can do 300,000rpm on a teency weency battery making you stacks of power that the lamo govt and corps dont tell you about otherwise no cut for them.
i dont know anything about these things,but cant you attach that thing to a generator head and make it spin that fast ?i dont know if it wont because generator head is more powerful than this.but isnt a good idea?but you need bigger magnats. good luck
Wow! There are so many generators like this one. Very, very nice job!! Someone needs to shell out some funding cash and get generators like this developed for residential and commercial use. Seriously.
ChronicMist ... This is not electronics, its mysticism. If you think your so smart how about an explanation of how this Bedini motor works. We can go from there.
All motors do not work the same way. This by the way is not claimed to be a motor since it drives nothing. It is supposed to convert power & in the process gain energy somehow.
No..it does work and it collects the negative energy, like south pole magnets, that you cant see and dont get taught about, otherwise you might go against the grain and build something that can charge batteries 24/7 to keep your lights on when the power goes out. When all of your batteries are full a Grid Tie Inverter can take the excess power to the grid. Whatever you create on your side of your power meter charges the house and doesnt suck electricity from the grid that you pay for. Simple.
Oh I see, so you have one of these generators??? I suppose you make a living selling power back to the grid? You know as well as I do that no device like this has ever been publicly demonstrated. They only work on youtube videos. If you could show an actual working device the investors would beat your door down. By the way, where did you get this south pole magnet, on the mothership?
Gday Tex, I have seen many generators on the YouTubes but none 1 on 1. The bedini resonant charger was all I needed for proof and soldering mine together right now. How narrow minded are we as a civilisation if we think power comes only from power stations. Drive down the street and look how much space and disgrace your average town's powerlines take up. If there was a higher form of life they must laugh at us from sunday to saturday. South Pole = Newton out Leedskalnin In. RP2012
utubefreemind. Ok the nonexisting unipole generator. Well since you believe the bedini generator works you might want to buy the kit from the inventor himself Bedini. Instead of selling his technology to build power plants he sells kits for people to "experiment". I really dont see many people generating their own power and selling it back to the grid with these generators but when you do how about letting me know. I wonder how you determined this worked by watching the video?
@Texmurphy51 well gee tex the problem with that is,the power plants are not interested in such technolgy,and "NEVER WILL BE".cause it's "Free Energy"and they are in the Profit Energy Business.and i doubt anyone will be ALLOWED to Purchase Mr Bedini's generator.
@myleftnutts Well I can tell you that countries like China, where the Gov owns everything & takes all the profit would be interested. They want cheap power for their people & if they could stop using coal & oil they would. No one would stop you from selling a complete unit in the US either. If that was true the kits would also be banned. By the way do YOU have a working unit? Can you show anyone who does?
@myleftnutts What do you mean Of What, what the hell are we talking about, what is this video about? A Free Energy Device of any type. Your such an expert on telling me about it I thought that you have more proof that it exists. You can by the way purchace plans and Kits of many of these devices from the inventors. So much for those Evil Energy Business blocking the technology. Bedini has a 10 coil kit you can buy.
@myleftnutts I am telling you this because you posted that this technology never will be ALLOWED to purchase the Bedini generator. I would not buy one because its a sham. If you believe it why dont you build or buy one?
@myleftnutts Free energy based on magnetic motors is just like the old Perpetual Motion machines that tried to use gravity as a source of power. It will not work. I say they are a sham because they only sell "experimental Kits" which means they dont have to work, legally. If someone had a working device they would have so many investors to propell it forward you could not stop it.
@Unstr810d Yeh I agree but what happens to all the electricity/ energy companies.. Things like this but bigger have been produced but I haven't seen it in the commercial world....I wonder why...
tolles Video ! Ich habe zwar keine Ahnung, aber eine Frage sei erlaubt:
Du benutzt also 15 Volt DC , 1,5 Amp = 22,5 Watt und bekommst 127 Volt, 0,65 Amp = 82 Watt Outputt.
Ist das auch so wenn du einen Verbraucher anschließt , oder geht dann die Drehzahl runter ? Wenn nicht müßtest du ja mit einer vollen Autobattery 3,6 leere Batterien aufladen können. Richtig oder Falsch ?
Ich würde es nicht als Spannungswandler bezeichnen. Das 131 Volt ist laut meine Meinung das tatsächliche Back EMF und nach meinen Experimenten weiß ich, daß du nach dem Spule keinen faulen Trick wie z.B. einen Transformator verwendet hast. Ich würde lieber die Spannung von Back EMF erhöhen völlig ungeachtet davon ob ich es als eine freie Energie Generator sehen will oder nicht. Es sollte eine "Back EMF Generator" sein und kein Generator im herkömmlichen Sinne.
Hallo! Bedinini hat für seiner Gerät 300V als "Back EMF" Spannung erwähnt. Mein Gerät liefert etwa 105 Volt. Hast du eine Idee wie ich diese "Back EMF" Spannung erhöhen könnte? Meine Spule ist aus 0,3 Lackdraht mit etwa 13ohm Wiederstand auf 10mm Eisenkern und es ist 70mm lang. Es besteht aus 3 Drähten. Ich habe schon versucht 2 Drähten statt einen fürs Antrieb benutzen, aber das etwa 105 Volt blieb konstant nach dem Kondensator.
Nimm einfach als Primärwicklung einen dickeren draht, 1-1,2 MM ca. 12meter länge.Ich hatte mit solch einer spule mehr als 600 Volt Back EMF am ausgang.
Weißt du zufällig wieso laut Bedini immer die Nordpolen von Magneten benutzen sollte?
Weißt du wie lange dauert Back EMF? Laut meinen Informationen nur 30 ms und wenn es so ist dann hätte ich eine Idee für wesentliche Verbesserung von dieser BEMF-Generator.
Der Nordpol übt gerigfügig mehr kraft aus , als der Südpol(denkt man).Die Back EMF dauer richtet sich nach dem Eigenwiederstand der spule,je größer der wierderstand um so länger die dauer der spannung ,die im leiter zurück schlägt.Deshalb ,je mehr kupferdraht ,desto besser der effekt.
Danke für die Erklärung. Ich habe eine große praktische Erfahrung mit der Magneten und ich gebe dir Recht, daß ihre Polkräfte, Anziehung, Abstoßung nicht umbedingt gleich sind. Es gibt interessante Phänomene. Was du über dauer der Back EMF ist auch okay sagst okay. Laut meinen Kenntnissen Back EMF meldet sich nur bei jenen Augenblick als das Magnet den Eisenkern verläßt und nicht ständig zusammen mit normaler Induktion.
Laut meine Meinung bei dieser Experiment sollte Induktion völlig unwichtig sein und wenn Induktion unwichtig ist, sollten die rotor Magneten und das EIsenkern von Elekromagneten unter keinen Umständen kreisförmig sein sonst ich würde für beiden eine sagen wir eine Stirnfläche von 30x2 mm vorschlagen. Was sagst du dazu?
Wieso nicht kreisförmig? Ich finde das die form der magnete und auch der spulen keine rolle spielen.Habe mit verschiedenen magneten und spulen experimentiert ,immer mit dem selben ergebnis.
Diese ursprünglichen "Bedinis" sind leider hoffnungslos veraltet. Die erzeugbaren Energiemengen sind im Verhältnis zu den erforderlichen Rotordimendsionen (auch bei dichterer Besetzung mit Permanentmagneten) "mikroskopisch" klein. Ein besserer Ansatz ist mit flüssigen Magneten (Suspension von Elementarmagneten in einer niedrigviskosen Flüssigkeit mit genügender - hoher! - Dichte.
und was genau schlagen Sie vor? Soll man nun motoren bauen auf flüssiger basis mit magnetfluriden etwa?Warum sollte das nun besser funktionieren?Zeigen Sie doch mal einen versuchsaufbau,bin gespannt.
Kauf dir das Buch "Die Bruderschaft der Glocke". Darin rotiert eine Flüssigkeit in einer Glocke so schnell, daß sie die Zeit beschleuningt und alles drumherum altert schnell. Wenn du ein Magneten in fellofuild reinlässt und dann ein Begini Neosphere baust dann kannst du sehen wie es durchknallt.
This is interesting thank you - please can you tell me what the wheel is attached to? and where can you get them. (the plastic wheel is attached to baring, which allows it to spin freely)
Can someone please translate it in English, i love the videos and experiment are clean. It will really help if someone can post details like size of plate, magnets details about electromagnets etc
Nein so ist es nicht.Der festplatten motor ist nicht angeschlossen.Nur noch das lager ist vorhanden.Die außeren spulen erzeugen ein EM-feld und stoßen den Rotor ab.Dei spannung von 126 Volt resultiert durch den Back EMF wenn das EM-feld der spulen kolabiert.
na dann hab ich das aber mal total falsch verstanden, vielen Dank für die schnelle korrektur!
aah jetzt glaub ich hab ichs verstanden:
mir war vorher nicht klar, dass die kleineren spulen vor den kupferspulen in einem seperaten stromkreis sind[was ja eigentlich klar sein müsste, aber das hatte ich nicht überrissen]
also diese kleineren spulen sind an ein messgerät angeschlossen..
wenn der rotor mit den magneten von den feldern der äußeren bewegt wird, rufen die magneten...
WoW das is ja der hammer... Hast nicht zufällig noch'n plan von deinem werk liegen den du mir mal schicken könntest???lieb frag
DuskitTray 1 week ago in playlist Favorite videos
Was ist das???????????????????????????????
tironakuqe 2 weeks ago
deine spulen sehen so komisch aus....kannst du mir irgendwie zukommen lassen wie du die gebaut hast und auch schaltplan mit den drei spulen? falls email oder skype gern per PN
WrongBirthday 1 month ago
KONNEN SIE FÜR MICH EIN BEDINI MOTOR ZU BAUEN !! NUR DIE 12 SPULEN BRAUCHE ICH UND DREHZAHLSTELLER ... 12V 50Ah ????? ALLES WIRD BEZAHLT
RUSSKIJify 1 month ago
126 Volt ausgang ? wow
WrongBirthday 1 month ago in playlist Favorite videos
@WrongBirthday das sind nur die Back EMF spitzen ,keine nennleistung.
querdenker79 1 month ago
from what type of hard drive did you remove the motor spinner?
Mrinfoone 1 month ago
ich frage mich, ob das Energie-effizienter ist als ein normaler Bürstenmotor mit gleicher Leistung.
RCRobN 4 months ago
Du caralho :)
lineuve 5 months ago
change gear!
pvcmonkey 6 months ago
Hi, i want to know how much amps my moter is using how do I do this. So the red lead from the meter gos to positive on the battery what about the black lead
333kgb 7 months ago
Dare you to lick it.
5ilent5hift 9 months ago
how do you make it?
what components are needed, and how his circuit, can you tell me
bajakanbanget 9 months ago
The negative on the primary battery go’s to the inner 20 gauge wire on the coil which also go’s to the emitter on the transistor and the inner 24 gauge wire from the coil go’s to the collator on the transistor then the neon bulb is connected to the emitter and collator does it matter which way I put the neon bulb? And is there any problems you see in this hookup? Thanks for you help!
333kgb 9 months ago
The potentiometer is connected to a 24 gauge outside coil wire. My 1N4007 diode is connected to the positive on the secondary battery. Then the outside 20 gauge wire runs to negative on the secondary battery and on the positive on the primary battery.
333kgb 9 months ago
Nice video! Hi I have been trying to get the bedini motor to work, but the wheel just comes to a stop. My setup is 1N4001 diode is connected on the emitter to the base on the transistor. Then the base is connected to a 470 resister. Then resister is connected to the potentiometer.
333kgb 9 months ago
people still working on bendini??? Stupid.
maxinpains 9 months ago
Ich werde dieses Projekt fuer die schule machen und habe noch eine kleine Frage...
Welchen Durchmesser sollen die zwei draehte haben?? Kann ich 0.1mm und 0.05mm draehte benutzen? Oder duerfen beide Draehte 0.05mm Durchmesser haben?
Oder Kann da was mit so einem duennem draht schiefgehen? Z.B. dass der Draht durchbrennt? Welchen Draht hast du benutzt?
Danke im Voraus
XLosSantosX 10 months ago
@XLosSantosX Nimm einfach für beide spulen einen draht von 0,5mm, dann gibt es keine probleme.
querdenker79 10 months ago
This has been flagged as spam show
Hello , I'm letting go of my personal copy of energy from the vacuum DVD part 2 , part 6 ,part 12 ,and part 20 on '' eBay '' for a discount thank you
cushionofair 10 months ago
Comment removed
cushionofair 10 months ago
if one magnet would get free at 10 degrees angle aimed to your head which means by 1/36 chance at 1.29, you would be killed by your own design. Be sceptical. At least little.
tapperxx 11 months ago 2
Comment removed
tapperxx 11 months ago
sorry, i'm knew to the idea of bedini cirquit, but how is this suppsoed to work? the magnets are attracted to some sort of metal inside the coil, making them spin when it gets close, but there's too much motion, to it goes past? or is the electricity drawn from the magnets helping the magnetets push past, continuing the cycle? please reply.
Blu0tuth0ninja 11 months ago
I'm wondering about what RPM the Plastic Disc separates from the balances on the outer perimeter ..... brave man.
orangeboxchina 11 months ago
hey there @querdenker79 i though of an idea on how to give you some extra power in this design, " static electricity" rig up a whool winter hat and a rubber band or baloon somehow should work good. Just an idea
thelth88 1 year ago
Can you give the schematics of the cirquit?
peter3d 1 year ago
I wonder if it may help to inset the magnets into the plastic so the edges of the magnets are the same as the edge of the plastic. I don't know.... Just an idea! good luck!
Landotter1 1 year ago
Wow die meisten Menschen tun das kühle Hochgeschwindigkeitsspinnen Magnete sind Deutsch, verstehe ich nicht Deutsch, ich spreche hier nur auf Deutsch, weil ich mit Google übersetzen bin. Sie haben ein sehr guter Mechanismus machte auch!
This was all by Google translate soo.....
DemonHunter2k7 1 year ago
i hear only 2450-2500 rpm
Turbocharge1000 1 year ago
this sounds like a honda dyno session if you close your eyes
bleachworthy 1 year ago 7
stick your finger in it
growdankdank 1 year ago
This has been flagged as spam show
Free inexhaustible energy is real!But the Oil companies want these technologies unknown to the masses,Find a motor that needs no fuel or input at LT-MAGNET-MOTORdotCOM ,The revolution begins!
dharmastipulate 1 year ago
Is it possible to travel through time with this device?
Kunibuler 1 year ago 26
This has been flagged as spam show
finde ich absolut klasse und es bestätigt doch, dass wir nicht aufgeben sollen.
HeinrichDreier 1 year ago
finde ich absolut klasse und es bestätigt doch, dass wier nicht aufgeben sollen.
HeinrichDreier 1 year ago
hannst du mri die bauanleitung für die spulen geben ? ich habe kein plan was das ist ^^ und wieviel strom fresen die dinger ?
LordTianYou 1 year ago
i like that wind sound! :D
iagohs 1 year ago
This has been flagged as spam show
Free Energy is real but the coverup is strong, if you are interested in a REAL free energy machine then
just search for the LT MAGNET MOTOR in the youtube video search , it is probably the ONLY working magnet
motor out there. Join the free energy revolution!!
hungarylnnjsd 1 year ago
are those neodymium magnets on the ends and what rpm is that motor?
hootergirlsrhot 1 year ago
@hootergirlsrhot 20x5 disk neodymium magnets ...rpm 5000U/min
querdenker79 1 year ago
That looks so dangerous when that collapses
killerbeenl 1 year ago
how it stop???automatik or manual??
dzjukiey 1 year ago
PLEASE TRANSLATE!
Taylaron1 1 year ago
NEEEEEIIN MAGNET LAGER SIND BESSER
jakub0306 1 year ago
good day!! its a good test....can you post the steps of how to make this
gsm010669 1 year ago
klingt wien automotor, hat nen guten sound !
Ficker0180 1 year ago
fail
Cascraft 1 year ago
did you use the hard disc drive motor?
perongs 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source that contradicts the law of energy conservation. I have a PROOF that there are electrodynamic phenomena that contradict the law of energy conservation. I am looking for $300 000 for a prototype and for $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of energy produced yearly $5400.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
very impressive. I am convinced now!
humanalive 1 year ago
where does the power come from to power the magnets???
bagredositio 1 year ago
its very dangrerous so look out
rolandlub 1 year ago
Have u tried to invert the principle, and try to generate power with it? In theory, correct me if I'm wrong, a triple coil would output triple the amount.
SilverTissues 1 year ago
Keep up te good work neighbor. One question, the coils that u use are Rodin coils, correct?
SilverTissues 1 year ago
@SilverTissues no, there are normal coils, bifilar
querdenker79 1 year ago
here u have it! the solution of global warming!
ForTuxinet 1 year ago
unbelievably STUPID IDEA TO CONTINUE
maxinpains 1 year ago
@maxinpains wtf?
gaussman08 1 year ago
This has been flagged as spam show
@gaussman08 I said unbelievably STUPID IDEA TO CONTINUE .
maxinpains 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of energy conservation. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and for $3M for patents. Making a 15 kW generator will cost $1200 in mass production, value of the energy produced yearly about $10 000.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of the energy produced per year $5400.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena which violate the law of energy conservation. I am looking for $30 000 for a prototype and $3M for patents. Making a 6 kW generator will cost $1200 in mass production, value of the energy produced per year $5400.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
welche Polung haben die magnete an der aussenseite ?
Alle + oder - oder +-+- ?
Cenobite1988 1 year ago
@Cenobite1988 weiß nicht mehr genau ,aber alle mit dem gleichen pol nach außen.So das die spulen die magnete abstoßen und nicht anziehen.
MfG
querdenker79 1 year ago
@Cenobite1988 bei meinem motor sind alle nordpool nach aussen
fischfreung 1 year ago
CAR DRAG SOUND GEİL GEİL GEİL !!!!!!!!
mustafa007ceylan 1 year ago
ok I got the point, is 126.8 Volts, but how many Amps??..or is maybe 0.18 A...P1 = P2....
GRATZIANI2002 1 year ago
@GRATZIANI2002 is will bve lower than 15V*1.5A=I*126.8V and than the efficiency of this thing
themassau 1 year ago
wow very nice!!!
saagiebawlz 1 year ago
now put your finger in there lol
Blaster7492 1 year ago
Hello.
Do you have a draft for the coil? Thickness and length of copper wire with inner and outer diameter of the bed is?
Thank you.
ugurparlayan 1 year ago
wow that looks unsafe O_o
Immaculite 1 year ago
@Immaculite no kidding as fast as that thing is going one of those magnets come off and your in the way and your screwed
Cyzerball 1 year ago
This has been flagged as spam show
I invented a breakthrough energy source which violates the law of conservation of energy. I have a PROOF that there are electrodynamic phenomena that violate the law of energy conservation. I am looking for $6M for a prototype and patents.
H. Tomasz Grzybowski
tel. +48-512-933-540
henrykay01 1 year ago
hey someone just stole ur car outside
TheJd45 1 year ago
i like how you set this up. would it be possible to make a vid on how u made it?
likine0 1 year ago
tools that use to run the engines?
turkian8 1 year ago
rpm??
SROCB 1 year ago
Is this a running voltage of the motor here (1:55 ) 126.8 Volts?
mksboysal 1 year ago
@mksboysal
run voltage is 15V 1,5Amp
126,8V is the output Back EMF
querdenker79 1 year ago
Very nice motor by the way. Excellent job! I was just responding to the infinite free energy comments below.
MPaulHolmes 1 year ago
I make motor controllers for electric cars, and the most common question I get is, "Can you just hook up a fan or something to recharge the batteries while the car moves?" Is conservation of energy really that hard to understand? Negative energy? What in the heck is that? I'm so sick of this stupid crap.
MPaulHolmes 1 year ago
This has been flagged as spam show
hui am really honny today! Anybody is bored too and want to msg meh
CareeLamberte4 1 year ago
Texmurphy51, u gotta b kidding,, jus so u know, the south pole is on the other side of the magnet's north pole. that was a test right? o brother!
bedini circuit works. end of story
mijdtr 1 year ago
mijdtr Sure the bedini circuit works but it does Not generate overunity. It runs as a motor but thats no big deal. The guy was talking about a magnetic monopole, thats a hypothetical particle where there would be a South pole with no north pole. jus so u know. Do you have one of these bedini motors powering you house???
Texmurphy51 1 year ago
Very cool, but what does it have to do with hard drives?
Pizzscn 1 year ago
A HDD bearing setup is designed to spin at 5400-15000 rpm which is within the range of the bedini circuit. Floating sphere magnets (inside an copper coil, where the steel should go) spin with minimal resistance and can do 300,000rpm on a teency weency battery making you stacks of power that the lamo govt and corps dont tell you about otherwise no cut for them.
UTubeFreeMind 1 year ago
i dont know what the fuck it is .but its fast ..and noisey..awesome ..
johnghadlington 1 year ago
i dont know anything about these things,but cant you attach that thing to a generator head and make it spin that fast ?i dont know if it wont because generator head is more powerful than this.but isnt a good idea?but you need bigger magnats. good luck
mouayad888 1 year ago
how do you built the trasformators? the energy of magnetic field, is caught by copper loops and transformed in electricity?
Vegeth24 1 year ago
Wow! There are so many generators like this one. Very, very nice job!! Someone needs to shell out some funding cash and get generators like this developed for residential and commercial use. Seriously.
Unstr810d 1 year ago 7
If this actually worked dont you think someone would have funded its development? Its just a spinning rotor driven by pulsing magnets.
Texmurphy51 1 year ago
texmurphy51, kid you're clueless about electronics
ChronicMist 1 year ago
ChronicMist ... This is not electronics, its mysticism. If you think your so smart how about an explanation of how this Bedini motor works. We can go from there.
Texmurphy51 1 year ago
Dude, that is how all motors are
Pizzscn 1 year ago
All motors do not work the same way. This by the way is not claimed to be a motor since it drives nothing. It is supposed to convert power & in the process gain energy somehow.
Texmurphy51 1 year ago
No..it does work and it collects the negative energy, like south pole magnets, that you cant see and dont get taught about, otherwise you might go against the grain and build something that can charge batteries 24/7 to keep your lights on when the power goes out. When all of your batteries are full a Grid Tie Inverter can take the excess power to the grid. Whatever you create on your side of your power meter charges the house and doesnt suck electricity from the grid that you pay for. Simple.
UTubeFreeMind 1 year ago
Oh I see, so you have one of these generators??? I suppose you make a living selling power back to the grid? You know as well as I do that no device like this has ever been publicly demonstrated. They only work on youtube videos. If you could show an actual working device the investors would beat your door down. By the way, where did you get this south pole magnet, on the mothership?
Texmurphy51 1 year ago
Gday Tex, I have seen many generators on the YouTubes but none 1 on 1. The bedini resonant charger was all I needed for proof and soldering mine together right now. How narrow minded are we as a civilisation if we think power comes only from power stations. Drive down the street and look how much space and disgrace your average town's powerlines take up. If there was a higher form of life they must laugh at us from sunday to saturday. South Pole = Newton out Leedskalnin In. RP2012
UTubeFreeMind 1 year ago
utubefreemind. Ok the nonexisting unipole generator. Well since you believe the bedini generator works you might want to buy the kit from the inventor himself Bedini. Instead of selling his technology to build power plants he sells kits for people to "experiment". I really dont see many people generating their own power and selling it back to the grid with these generators but when you do how about letting me know. I wonder how you determined this worked by watching the video?
Texmurphy51 1 year ago
@Texmurphy51 well gee tex the problem with that is,the power plants are not interested in such technolgy,and "NEVER WILL BE".cause it's "Free Energy"and they are in the Profit Energy Business.and i doubt anyone will be ALLOWED to Purchase Mr Bedini's generator.
myleftnutts 1 year ago
@myleftnutts Well I can tell you that countries like China, where the Gov owns everything & takes all the profit would be interested. They want cheap power for their people & if they could stop using coal & oil they would. No one would stop you from selling a complete unit in the US either. If that was true the kits would also be banned. By the way do YOU have a working unit? Can you show anyone who does?
Texmurphy51 1 year ago
@Texmurphy51 a working unit???. of what???.
myleftnutts 1 year ago
@myleftnutts What do you mean Of What, what the hell are we talking about, what is this video about? A Free Energy Device of any type. Your such an expert on telling me about it I thought that you have more proof that it exists. You can by the way purchace plans and Kits of many of these devices from the inventors. So much for those Evil Energy Business blocking the technology. Bedini has a 10 coil kit you can buy.
Texmurphy51 1 year ago
@Texmurphy51 i never told i had a unit.have u purchased the bedini coil?.
myleftnutts 1 year ago
@myleftnutts I am telling you this because you posted that this technology never will be ALLOWED to purchase the Bedini generator. I would not buy one because its a sham. If you believe it why dont you build or buy one?
Texmurphy51 1 year ago
@Texmurphy51 what makes u think it's a sham???.and when u say this do u mean just the bedini device or free energy as a whole???.
myleftnutts 1 year ago
@myleftnutts Free energy based on magnetic motors is just like the old Perpetual Motion machines that tried to use gravity as a source of power. It will not work. I say they are a sham because they only sell "experimental Kits" which means they dont have to work, legally. If someone had a working device they would have so many investors to propell it forward you could not stop it.
Texmurphy51 1 year ago
@Unstr810d Yeh I agree but what happens to all the electricity/ energy companies.. Things like this but bigger have been produced but I haven't seen it in the commercial world....I wonder why...
lak94 7 months ago
@lak94 here is no more energy. This is only the back EMF
querdenker79 7 months ago
Man with that much speed you need to try an output coil.
The voltage output increases by the speed, but mechanical drag is only related to output current...
With a transformer you can step down high voltage into large current and charge your batteries.
Just a thought...
Nabo00o 1 year ago
Can you tell me what you used for this project?
ironknightzero 1 year ago
hast du dich mal verletzt ?
bei 10k touren xD
klecar2 2 years ago
mal ne "doofe" frage hier von mir: ist das ein over-unity-teil ?
TimewarpLabs 2 years ago
@TimewarpLabs
ganz klares NEIN...:-)
MfG
querdenker79 2 years ago
Moin Moin,
tolles Video ! Ich habe zwar keine Ahnung, aber eine Frage sei erlaubt:
Du benutzt also 15 Volt DC , 1,5 Amp = 22,5 Watt und bekommst 127 Volt, 0,65 Amp = 82 Watt Outputt.
Ist das auch so wenn du einen Verbraucher anschließt , oder geht dann die Drehzahl runter ? Wenn nicht müßtest du ja mit einer vollen Autobattery 3,6 leere Batterien aufladen können. Richtig oder Falsch ?
SuperDaddy1964 2 years ago
Die spannung geht natürlich runter ,wenn ein verbraucher angeschlossen ist.Ich messe ja keine generierte spannung ,sondern die Back EMF spitzen.
MfG
querdenker79 2 years ago
UND FUER WAS SOLL DAS GUT SEIN ?
rolfinator1 2 years ago
...nicht für Dich...schon OK,schau Dich weiter um.
querdenker79 2 years ago
gm,vngjkfdnvksjdf
vftdhys 2 years ago
Ich würde es nicht als Spannungswandler bezeichnen. Das 131 Volt ist laut meine Meinung das tatsächliche Back EMF und nach meinen Experimenten weiß ich, daß du nach dem Spule keinen faulen Trick wie z.B. einen Transformator verwendet hast. Ich würde lieber die Spannung von Back EMF erhöhen völlig ungeachtet davon ob ich es als eine freie Energie Generator sehen will oder nicht. Es sollte eine "Back EMF Generator" sein und kein Generator im herkömmlichen Sinne.
MitzFritz 2 years ago
:-) bin ganz Deiner meinung.
MfG
querdenker79 2 years ago
Wow! 600Volt ist schon was. Danke für die Antwort.
MfG
MitzFritz 2 years ago
Fast!
tubecat72072 2 years ago
this is fast as hell XD
tomasiop 2 years ago
Wenn der Motor nach dem Abschalten ausläuft, müsste man ja noch Spannung am Output messen können. Ist das so?
finnmako 2 years ago
Ja ,genauso ist es.Die spannung steigt sogar für ein paar sek. an auf ca. 136Volt.
MfG
querdenker79 2 years ago
Heißt das, dass die input Spulen die output Spulen " behindern " ?
Ist es denkbar bei einer anderen Anordnung z.B. zwei Etagen, das dieser Effekt verschwindet, so das immer 136V zu liefern währen ?
MFG
finnmako 2 years ago
Selbst wenn ja...dann ist es nichts weiter ,als nur ein spannungswandler.
Hat nichts mit Free Energy zu tun.
MfG
querdenker79 2 years ago
Hallo! Bedinini hat für seiner Gerät 300V als "Back EMF" Spannung erwähnt. Mein Gerät liefert etwa 105 Volt. Hast du eine Idee wie ich diese "Back EMF" Spannung erhöhen könnte? Meine Spule ist aus 0,3 Lackdraht mit etwa 13ohm Wiederstand auf 10mm Eisenkern und es ist 70mm lang. Es besteht aus 3 Drähten. Ich habe schon versucht 2 Drähten statt einen fürs Antrieb benutzen, aber das etwa 105 Volt blieb konstant nach dem Kondensator.
MfG
MitzFritz 2 years ago
Nimm einfach als Primärwicklung einen dickeren draht, 1-1,2 MM ca. 12meter länge.Ich hatte mit solch einer spule mehr als 600 Volt Back EMF am ausgang.
MfG
querdenker79 2 years ago
Weißt du zufällig wieso laut Bedini immer die Nordpolen von Magneten benutzen sollte?
Weißt du wie lange dauert Back EMF? Laut meinen Informationen nur 30 ms und wenn es so ist dann hätte ich eine Idee für wesentliche Verbesserung von dieser BEMF-Generator.
MitzFritz 2 years ago
Der Nordpol übt gerigfügig mehr kraft aus , als der Südpol(denkt man).Die Back EMF dauer richtet sich nach dem Eigenwiederstand der spule,je größer der wierderstand um so länger die dauer der spannung ,die im leiter zurück schlägt.Deshalb ,je mehr kupferdraht ,desto besser der effekt.
MfG
querdenker79 2 years ago
Danke für die Erklärung. Ich habe eine große praktische Erfahrung mit der Magneten und ich gebe dir Recht, daß ihre Polkräfte, Anziehung, Abstoßung nicht umbedingt gleich sind. Es gibt interessante Phänomene. Was du über dauer der Back EMF ist auch okay sagst okay. Laut meinen Kenntnissen Back EMF meldet sich nur bei jenen Augenblick als das Magnet den Eisenkern verläßt und nicht ständig zusammen mit normaler Induktion.
MitzFritz 2 years ago
Laut meine Meinung bei dieser Experiment sollte Induktion völlig unwichtig sein und wenn Induktion unwichtig ist, sollten die rotor Magneten und das EIsenkern von Elekromagneten unter keinen Umständen kreisförmig sein sonst ich würde für beiden eine sagen wir eine Stirnfläche von 30x2 mm vorschlagen. Was sagst du dazu?
MitzFritz 2 years ago
Wieso nicht kreisförmig? Ich finde das die form der magnete und auch der spulen keine rolle spielen.Habe mit verschiedenen magneten und spulen experimentiert ,immer mit dem selben ergebnis.
MfG
querdenker79 2 years ago
Part 4 REGENERATIVE ACCELERATION using 1/4 HP DC Motor. (VIDEO)
this is what i mean. the motor will cause the power to increase the speed of the rotor.
whitlcj1 2 years ago
if you use a generator for the center wheel, does the added power increase the amperages through the system and make the wheel turn faster?
whitlcj1 2 years ago
Diese ursprünglichen "Bedinis" sind leider hoffnungslos veraltet. Die erzeugbaren Energiemengen sind im Verhältnis zu den erforderlichen Rotordimendsionen (auch bei dichterer Besetzung mit Permanentmagneten) "mikroskopisch" klein. Ein besserer Ansatz ist mit flüssigen Magneten (Suspension von Elementarmagneten in einer niedrigviskosen Flüssigkeit mit genügender - hoher! - Dichte.
kleenex3000 2 years ago
und was genau schlagen Sie vor? Soll man nun motoren bauen auf flüssiger basis mit magnetfluriden etwa?Warum sollte das nun besser funktionieren?Zeigen Sie doch mal einen versuchsaufbau,bin gespannt.
MfG
querdenker79 2 years ago
ferro fluid mein freund. Ich habe dazu ein video in meine Uploads.
Subspace4d 2 years ago
Ich kenne dieses zeug,aber wie willst Du damit einen motor bauen???Dein gedankengang ist mir nicht ganz klar???
MfG
querdenker79 2 years ago
Kauf dir das Buch "Die Bruderschaft der Glocke". Darin rotiert eine Flüssigkeit in einer Glocke so schnell, daß sie die Zeit beschleuningt und alles drumherum altert schnell. Wenn du ein Magneten in fellofuild reinlässt und dann ein Begini Neosphere baust dann kannst du sehen wie es durchknallt.
Subspace4d 2 years ago
Du sollst nicht alles glauben was Du ließt.Ich bleib lieber auf dem boden der tatsachen ohne die zeit zu beschleunigen.
MfG
querdenker79 2 years ago
i like the sound
DcCornnnnn 2 years ago
kinda sounds like a honda with a fartcan exaust with no revlimiter
ARR016a 2 years ago
Und was genau habe ich da jetzt gerade gesehen? Ne Scheibe die sich schnell dreht und zwar mittels Magnetkraft (richtig?) .. und fuer was?
Rodnox 2 years ago
Wenn Du nicht verstehst worum es hier geht ,dann schlage ich vor einfach mal bei Google nachzuschlagen,stichwort "Bedini motor"
MfG
querdenker79 2 years ago
Erklaers doch einfach unter "Video Description" ... "First runn..." sagt nicht viel.
Rodnox 2 years ago
ist das so ne glasplatte aus der microwelle oder wie hast du dieses ding an das andfere ding befestigt? =D
MsSoylu 2 years ago
This is interesting thank you - please can you tell me what the wheel is attached to? and where can you get them. (the plastic wheel is attached to baring, which allows it to spin freely)
DiyEcoProjects 2 years ago
it's from a hard drive, take apart an old computer hard drive and you will find the part your looking for.
pkrska 2 years ago
its fixem on a HDD motor
bibiricat 2 years ago
Looks pretty good - but is there some kind of a requirement that ALL of these "free energy" videos be out of focus, shaky, and poorly lit!?
chillinator 2 years ago
Idea: Try using 1 more magnet than coilss. (4 Coils = 3 Mags, 10 coils = 9 Mags, etc...) Is it a better design?
SyTyger 2 years ago
das spielt keine rolle,egal wieviele magnete man anbringt.
querdenker79 2 years ago
..in den kleineren spulen durch induktion(die magneten mit ihren feldern sind im bereich der spule und bewegt) den stom hervor??
hab ichs jetzt richtig?
gut ab auf jeden fall von dem technischen aufbau, ich könnte das bei weitem nicht so gut zusammenbasteln.
mfg
tranquillity91 2 years ago
Nein ,mit induktion hat das nichts zu tun, nur mit Back EMF durch gepulste gleichspannung.
MfG
querdenker79 2 years ago
oh mein fehler, ist ja ein festplattenmotor ^^^^
Axel2989 2 years ago
jagt er da 127 V drauf ^^, schon mal die rpm gemessen? sicher sehr schnell
Axel2989 2 years ago
127V bei 0,65Amp sind am ausgang messbar.
Die eingangsspannung liegt bei 15V.. 1.5 Amp.
querdenker79 2 years ago
Man ey ich wil wissen wir man des baut ....
1eurojopper 2 years ago
The following information in this site is the result of many hours of professional research and I hope it will help you:
Energy2020Today(DOT)com
mondocata 2 years ago
bin zu doof dafür
Zattoo20 2 years ago
brilliant! I´m building one so I can use my laptop at the forest during a expedition
jeanpaolo 2 years ago
wie geil will auch so ein teil haben
Zattoo20 2 years ago
Bau Dir eines.Kostenfaktor ca.30 Euro.
MfG
querdenker79 2 years ago
Sehr viel schön. du beglückwünschst.....
Roobert33 2 years ago
was soll denn dass???
sszherti 2 years ago
Very Nice. Keep up the great work !
rainmanp7 2 years ago
Can someone please translate it in English, i love the videos and experiment are clean. It will really help if someone can post details like size of plate, magnets details about electromagnets etc
thank you
mohit2308 2 years ago 3
the same for me :)
vito591 2 years ago
basically, from what i gathered from it, the drive had magnets on it. and was generating 126v of current
misfitmatt87 2 years ago
haha, I wont claim to understand the language better than you but something about measuring current in volts tells me you are wrong
encantarebelde 2 years ago
as far as I get it right, there is a hhd motor unter the disk with the attached magnets.
The hdd motor is powered by 15v/1,5amp.
through electromagnetic induction in the coils, the output equals 126v/0,65amp.
this is basically another way to transformate current, if I got it right
tranquillity91 2 years ago
Nein so ist es nicht.Der festplatten motor ist nicht angeschlossen.Nur noch das lager ist vorhanden.Die außeren spulen erzeugen ein EM-feld und stoßen den Rotor ab.Dei spannung von 126 Volt resultiert durch den Back EMF wenn das EM-feld der spulen kolabiert.
MfG
querdenker79 2 years ago
na dann hab ich das aber mal total falsch verstanden, vielen Dank für die schnelle korrektur!
aah jetzt glaub ich hab ichs verstanden:
mir war vorher nicht klar, dass die kleineren spulen vor den kupferspulen in einem seperaten stromkreis sind[was ja eigentlich klar sein müsste, aber das hatte ich nicht überrissen]
also diese kleineren spulen sind an ein messgerät angeschlossen..
wenn der rotor mit den magneten von den feldern der äußeren bewegt wird, rufen die magneten...
tranquillity91 2 years ago
o my gosh its a clearplatter HDD!!
lol lk. nice one though :)
cheetawolf 2 years ago