@gasripper2 thats cause ford has been ripping motorists off for long enough theyd more than 50 billion layin round to pay people off from sayin shit nuf said
@chevynut71570 Doesnt matter what GM did...they payed all their money back and are now the best selling automobile manufacturer in the world once again...General Motors cannot be matched....no ford will ever beat a gm car..I'm replacing head gaskets on a96 POS mustang right now for my friend....lol Im on this video showing him that it happens to EVERY mustang owner of this year lol
The good news is, These cars are real easy to change the gaskets out on. Could be done in a day. Grab yourself some GT40 Turbo swirls or some Explorer heads.(They are the same as GT40 irons) and change them out when you do the gasket. You'll be glad you did.
@Sidewinder9877 The GT40 iron head (part no.F3ZE-AA) will have the spark plug reach into the chamber and the volume should be ~68cc. THe other head has a prefix of E7TE and I don't remember the suffix.
My brother has a 1990 Lincoln mark7 with a 5.0, ford cobra intake, cammed, pulley, swapped 5 speed trans, and computer, flowmastet exhaust, and 3.73 gear that fucker hauls!
hey wats with the hot air intake i see alot of mustangs with that its not a coldair intake unless it get cold air all ur doing is sucking in hot air get a fender weld intake or put the stock back on with k/n
@orangestoneface not the the valve cover gasket, the head gasket, the gasket between the cylinder head and engine block, which can let go causing coolant to leek through to the cylinders. And this engine does not have a timing belt, it has a timing chain, therefore it has a different cover, which sits practically on the complete front of the engine. when i inspected the gasket, i found deterioration around the coolant ports, allowing it to go straight into the oil supply.
Did you sort your head out? lol I mean head gasket of course.
I just did mine. 3 days work spread out over a month. On a 95 525i. Cost 50 quid to do it myself otherwise id have had to pay between 400 n 500 quid to a garage.
i currently have the motor stripped down to bare block, waiting for some money to start rebuilding it. turns out it was not the head gaskets, it was the timing cover leaking :( i didnt find this out until i had the heads off, and i figured if i was that far, i would just do the whole thing...)
just cant wait till its on the road again, hopefully this summer!
good song
Joeyem1122 3 months ago
ford doing what it does best
ghostie112004 6 months ago
The only thing worse than milk shakin is peptobismol and mayo in the transmission.
polarablues64 7 months ago
YESSSSSSSSSSS! THE HEAD GASKET!!!!
WizzoPro9476 7 months ago
5.0 head gasket isn't near as bad as changing one on an 5.7lt1, you have to take off everything!
RedResurrections 8 months ago
At least FORD did not get a 50 billion dollar bail out just to stay in business! Our tax dollars hard at work! Who sucks now!
gasripper2 8 months ago
@gasripper2 LOL I used to hate Fords but they've earned my respect over the last decade... Now if only they'd sell the Focus RS here!
nightmathzombieethan 6 months ago 3
@gasripper2 thats cause ford has been ripping motorists off for long enough theyd more than 50 billion layin round to pay people off from sayin shit nuf said
ghostie112004 6 months ago
@ghostie112004 You mad? You mad
gasripper2 6 months ago
@gasripper2 Ford didnt have to get the bailout because they are owed by MAZDA! you dipshit! At least GM didnt sell out to the japs!
chevynut71570 4 months ago
@chevynut71570 Mazda doesnt own Ford. Ford owns a share in Mazda. Get your facts right
Backtrack1302 3 months ago
@chevynut71570 Doesnt matter what GM did...they payed all their money back and are now the best selling automobile manufacturer in the world once again...General Motors cannot be matched....no ford will ever beat a gm car..I'm replacing head gaskets on a96 POS mustang right now for my friend....lol Im on this video showing him that it happens to EVERY mustang owner of this year lol
Deciblaster 1 month ago
At least FORD did not 50 billion dollars of tax dollars to stay in business!!! Who sucks now!
gasripper2 8 months ago
F-O-R-D....fixed-or-repaired-daily..
merredover 8 months ago
F-O-R-D....fixed-or-repaired-daily.....jk
merredover 8 months ago
That sucks but not as much as the music does.
tallbergs 9 months ago
@chevyslayer1 i have a better one "Fucked On Race Day"
xXxchipperchopperxXx 9 months ago
The good news is, These cars are real easy to change the gaskets out on. Could be done in a day. Grab yourself some GT40 Turbo swirls or some Explorer heads.(They are the same as GT40 irons) and change them out when you do the gasket. You'll be glad you did.
Sidewinder9877 9 months ago
@Sidewinder9877 The GT40 iron head (part no.F3ZE-AA) will have the spark plug reach into the chamber and the volume should be ~68cc. THe other head has a prefix of E7TE and I don't remember the suffix.
PASCHDigiMedia 7 months ago
@PASCHDigiMedia E7TE heads are the stock ones. Those were actually borrowed from trucks.
Sidewinder9877 7 months ago
Nothing quite like the sinking feeling you get when chocolate milk appears in your oil.
Zilch79 10 months ago
thats because its a ford.....Found On Road Dead.
motogp017 11 months ago
@motogp017 how clever and witty that was. what other clever Ford acronyms do we have to share with the rest of the class?
stangman021 10 months ago
@motogp017 it Found Off Road Dead
xXxchipperchopperxXx 9 months ago
Keep that 5.0 in the road!!
My brother has a 1990 Lincoln mark7 with a 5.0, ford cobra intake, cammed, pulley, swapped 5 speed trans, and computer, flowmastet exhaust, and 3.73 gear that fucker hauls!
YOUFORD89 1 year ago
@barcode625 hahaha, I just realized that. How dumb of me lol I don't see many mustangs here in australia
suzukiholdenman 1 year ago
what was in the oil i have a 88 gt wiht samw motor in it and it has gas in the oil and i dont know how or y
nickdelp1 1 year ago
What's with straight 6's blowing head gaskets?
suzukiholdenman 1 year ago
@suzukiholdenman thats a 5.0....v8
barcode625 1 year ago
hey wats with the hot air intake i see alot of mustangs with that its not a coldair intake unless it get cold air all ur doing is sucking in hot air get a fender weld intake or put the stock back on with k/n
donnienordan 1 year ago
how can a leaky valve cover put water in the oil, or timebelt cover , I think not, as far as I know, wich is not much.
orangestoneface 1 year ago
@orangestoneface not the the valve cover gasket, the head gasket, the gasket between the cylinder head and engine block, which can let go causing coolant to leek through to the cylinders. And this engine does not have a timing belt, it has a timing chain, therefore it has a different cover, which sits practically on the complete front of the engine. when i inspected the gasket, i found deterioration around the coolant ports, allowing it to go straight into the oil supply.
TheBlindDoctor 1 year ago
Did you sort your head out? lol I mean head gasket of course.
I just did mine. 3 days work spread out over a month. On a 95 525i. Cost 50 quid to do it myself otherwise id have had to pay between 400 n 500 quid to a garage.
marcusarelius23 1 year ago
sorry to hear it!! would like to know what happened
therockkkkher 2 years ago
i currently have the motor stripped down to bare block, waiting for some money to start rebuilding it. turns out it was not the head gaskets, it was the timing cover leaking :( i didnt find this out until i had the heads off, and i figured if i was that far, i would just do the whole thing...)
just cant wait till its on the road again, hopefully this summer!
xWARBRINGER 2 years ago 2
At least it's not OHC, the work shouldn't be that hard :)
pickupman1995 2 years ago