I am about to purchase a nitrous kit. I have a 1982 Mustang coupe, original 302 HO with a fresh rebuild with hypereutectic pistons and moly rings, mild cam, stock 70cc, 8.2:1 heads which I purposely kept so I could use nitrous, Edelbrock carb, headers, exhaust etc. I did not gap the rings for nitrous or anything, just made sure they were within the manufacturer's specs. Will I be okay to use nitrous(150 shot max)? Also, I want to use an AOD with 3500 stall, how much power can a stock AOD handle?
i have juice on my car but its only a 150 shot. are you running cam fuel or 93? is your car fuel injected or carbed? what do you have for heads? can you tell me what you got?
@chaoticXdisaster If you want to stay running pump gas, the highest shot that NOS will recommend is a 150, IIRC. Running on race gas, you can get as high of a shot as you want, as long as it's plumbed correctly and you retard the timing enough. If you try to run advanced timing, you're gonna have one fancy hand grenade. You can, however, get away with running larger than a 150 shot on pump gas, if you retard the timing a few more degrees than recommended. Be careful on that block, though.
@stmpeed lol its a honda motor wich at a certain rpm it engages vtec (Variable Valve Timing and Lift Electronic Control) and it goes from a weak sound to a big sound
nope especially a moron who asks a question as dumb as that. and you say im a retard? you shouldn't use such derogatory words people might take offense. im physically and mentally sound, thank you very much.
Oh lord baby Jesus lol damn.........
Ish2504 1 month ago
Thanks asshole I now have a raging hard-on and can not stand up.
Omega47 5 months ago
holy gooose bumps that went from like 2500 rpm to like 7500 in like .0000000002 seconds lol wow how long or how well is it holding up ?
f100lover91 7 months ago
thats how ya wake a stang up!!
Rone170 7 months ago 4
when the car rose up so did my dick
gtracer56 11 months ago
I am about to purchase a nitrous kit. I have a 1982 Mustang coupe, original 302 HO with a fresh rebuild with hypereutectic pistons and moly rings, mild cam, stock 70cc, 8.2:1 heads which I purposely kept so I could use nitrous, Edelbrock carb, headers, exhaust etc. I did not gap the rings for nitrous or anything, just made sure they were within the manufacturer's specs. Will I be okay to use nitrous(150 shot max)? Also, I want to use an AOD with 3500 stall, how much power can a stock AOD handle?
gtdrummerdude 1 year ago
@gtdrummerdude You'll be fine with a 150 shot, even with Hyper pistons. But spraying with a stock AOD=Dead AOD.
408Mustangs 1 year ago
what was the dyno numbers..how how can it withstand 300 shot?
chaoticXdisaster 2 years ago
converter is too tight or it drove through the clutch. souds good tho. good response
maro69355 2 years ago
This shop should invest in a bigger fan
StriderTacticaL 2 years ago
Very nice. Just evil man. A++++
mustangpapi76 2 years ago
dude thats sick that thing leaped!!! thats a big shot
danielson631 2 years ago
sick car, congrat's!
Xarmy187 3 years ago
got a question
i have a 347 stroker
ford racing x cam
cobra intake
24 lb injectors
forged inturnals
whats the biggest hp jet i can run and not blow my engine up?
200hp shot?
keep in mind i will not be usein the nos all the time
chaoticXdisaster 3 years ago
Are your rings gapped for nos?
well you be useing pump gas?
You need a cooler plug and pull out 2Drg pre
50 horse shot. I would start with a 100 and work my way up keeping a close eye on the plugs.
stmpeed 3 years ago
i have juice on my car but its only a 150 shot. are you running cam fuel or 93? is your car fuel injected or carbed? what do you have for heads? can you tell me what you got?
gsxr32686 2 years ago
@chaoticXdisaster If you want to stay running pump gas, the highest shot that NOS will recommend is a 150, IIRC. Running on race gas, you can get as high of a shot as you want, as long as it's plumbed correctly and you retard the timing enough. If you try to run advanced timing, you're gonna have one fancy hand grenade. You can, however, get away with running larger than a 150 shot on pump gas, if you retard the timing a few more degrees than recommended. Be careful on that block, though.
lazybum54321 1 year ago
what size motor and how big of a shot was it?
chaoticXdisaster 3 years ago
the motor is asbf 428ci with a 300 shot.
best time so is 5.56 at 127mph
stmpeed 3 years ago
how did you put vtec into your mustang?!
penilesecretions 3 years ago
what is a vtec? i have a sbf 428ci motor
stmpeed 3 years ago 5
@stmpeed lol its a honda motor wich at a certain rpm it engages vtec (Variable Valve Timing and Lift Electronic Control) and it goes from a weak sound to a big sound
lilfelipe14 1 year ago
@stmpeed he was making a joke, well was making fun of ricer guys that freak out over their v-tech. it's honda's version of a 4v modular.
DEMONSPEEDIN 1 year ago
thats a honda motor dude... wtf?
mullikin 3 years ago
hahahaha fail
overcast56 2 years ago
wow i hope thats not a serious question
your the second idiot i saw on youtube that said something about a muscle car having v-tec.
danielson631 2 years ago
nothing gets by you, does it retard?
penilesecretions 2 years ago
Comment removed
danielson631 2 years ago
This has been flagged as spam show
nope especially a moron who asks a question as dumb as that. and you say im a retard? you shouldn't use such derogatory words people might take offense. im physically and mentally sound, thank you very much.
danielson631 2 years ago
@penilesecretions I know that this comment was over a year ago but LOL you made me laugh that was too good
89MustangGuy 1 year ago
id hit it!
SSnthe10s 3 years ago
Isn't nitrous fun!!!
docknotts 4 years ago 3
hell yeah it is! im running a 100hp shot on my 95gt... i wish my motor would take a 300hp shot!
mullikin 3 years ago 2
holy fuck that was awesome.
blade7764 4 years ago 5
Damn!
blacksslumina 4 years ago 2