Swamp Series on Grizzly 700

[mrskillz8910]

Is it much louder than stock? do you have quiet core in it? thanks

[bbyrd77]

i have a 700 just like this but with snorkels and i want to get a optimizer..because i need to level out my fuel intake to my o2 intake i think its gettin to much air and not enough fuel and it doesnt have the same power. so shoud the optimizer help that or do i need to do sumin different? any suggestions??

[plow0www]

is it me or does the stock pipe sound exsactly like the hmf swamp series?

shoulda got the hmf swamp xl series

[irishaj302]

how hard is it to set the optimizer up after you install it?? i saw a video on here about it but it didnt really explain much...

[cleanyota20]

Honestly, knowing what I know now.... I'd recommend buying a Power Commander or a Copperhead VDI box instead of the Optimizer. If you plan on doing anything besides an exhaust, don't waste your money on the Optimizer. All you can do is add fuel with it. When you snorkel a bike or want to tune one, a lot of the time, you have to remove fuel and with the Optimizer.... you just can't do this. Save your money and buy a REAL tuner. JMO

[homegade]

do u hafe to have the optamizer

[cleanyota20]

It's highly recommended. You're changing the volume of exhaust flow, so, you need to compensate with your fuel for that. You could run lean, on the fuel side, if you don't get one

[blakepilot]

thanks!

[Blanchard45]

how hard is it to put on the optimizer ????

[cleanyota20]

very easy! all you have to do is unplug your fuel injector connection and connect one end into that and the other end into where it was plugged. then ground the optimizer to the bike and it's all set

[Blanchard45]

cool thanks

[kloostra93]

was there a big diffrence in power and torque when you attached it?

[cleanyota20]

there was a noticeable increase. I recommend this exhaust.  it's awesome

[atvrider666]

how long did it take to put on?

[cleanyota20]

not long at all man. probably ten minutes maybe, that's taking the old one off and putting the new one on

[salazar6168]

Does it have the silencer in it or spark arester.

[ghmsfootball58]

is it hard to put em on?

[cleanyota20]

no man... it's pretty straight forward. Just remove the old, and bolt the new one on. Hence the name.... slip-on.

[XxJamieOvertonxX]

yea the only problem tho is that i cant find one.

[XxJamieOvertonxX]

plz message my page

[cleanyota20]

You might be able to make it work, but it's not going to bolt directly onto it. That's for sure. Remember, this pipe has been tuned for the 700. I think you would do better to choose another pipe that is tuned for your specific application.

[XxJamieOvertonxX]

do you know if this pipe would fit on an 08 grizzly 400

[rafa671]

butiful sound!!!

[cleanyota20]

thanks. I like. Good power increase, without the high noise level of the utility series