How to Assemble a Lan-Lan 2x2

[kevinisanaaron]

how do i loob this coob?

[astonfersa]

This video is very helpful ! Thanks !

[eezzstudios]

just got it figed out had to loosen a screw more i waited forever for my 2x2 to come and a week later it broke my mom would have gotten soooo mad thanks for saving my life!!!

[eezzstudios]

cant get last piece in i keep wiggling it a nd wiggling it and it wont go. Please help!!

[01Eddy10]

Thanks for uploading this video, really helped me alot

[indestructiblehero]

7:14 That's what she said.

[RobloxGamer423]

OMG thank u so much

[HmongZboy]

it would work but man i only have 7 black piece hmmm where can i get those

[MultiBuddycool]

this doesn´t work fuck u

[ILiveForMusic11]

Yeah it locked up on me because the middle piece popped out inside of it. Thanks for suggesting loosening a screw to get it back in. :) Thanks a lot!!

[gringuitox]

IT WORKED!! haha thanks a lot dude, it got fixed my 2x2

[TheNautn]

THANKS!. I just got my cube today, and a piece popped, and I was afraid I broke it. Thanks again.

[Krashman101]

for the last piece, the foot can't fit into the hole because it's too small, it's impossible for me to "wiggle it into place". plz help!

[thebackflipmaster]

@Krashman101 loosen one screw until the piece can pop in, then tighten the screw(s) to the tension you like

[xpunkxrocker48]

You seriously just saved my life. Not even half an hour after I got my 2x2, it got stuck and fell apart on it's own. THANK YOU.

[danwe10]

Thanks! This helped alot

[ThePaulG1]

I ended up with one edge left over and I can't get the last cornerpeice in! Please help!!!

[thebackflipmaster]

@ThePaulG1 I don't know what to say besides "Start over and try again. Good Luck."

[lx0]

really useful thanks :)

[puliukko13]

Helped MUCH! Thanks!

[pollo882]

you are god

[Lethalis1234]

i ordered 10 of these of off Cube4You and im SOO EXCITED. i got the others for my friends. :D wish me luck that my shipping is fast!!

[TeamVegasAirsoft]

Thank You soo much!

[vptennis77]

how do u actually take off the little corner piece in each of the seperate cubes. please reply!!!!!

[umphuss]

this is like the first video i have ever commented on that was positive because i like how you did things so thank you.

[Speedwastl]

Thank you :)

[dfy1012]

Does this work for a Ghost Hand 2x2? I heard it uses a similar mechanism, it that true?

[thebackflipmaster]

@dfy1012 i believe Ghost hands have a similar mech, but I don't have one. might work

[xlazmlx]

@thebackflipmaster i lost a piece of the core thingy and just one wat do i do it keeps freezing and it wont move even a little cuz its stuck then i have to dis and assemble all over again plz help!!!!

[thebackflipmaster]

@xlazmlx if you lost a piece, then you'll just have to get a new 2x2. :[

[xlazmlx]

@thebackflipmaster man that sucks! but i think its in my dads car idk hehehe

[TheShayminator]

i absolutely cannot get the final corner in.

[TheShayminator]

@TheShayminator i lied, i just had to work at it for like 20 minutes.

[vptennis77]

@TheShayminator just losen the other screws.

[Giveaways4Runescape]

lawl, just figure dit out myself :P

[BBBQ4]

MM green tea is good. I'm gonna get lanlan for x_mas if i make it :D

[GxETAKSx]

the fucking last piece wont go in HELP even with brute force

[firefacedj1997]

for some reason now when i turn it it jams and pops all the time and i cant turn a side a full 360 without it falling apart pleese help meeeeeee

[thebackflipmaster]

@firefacedj1997 does this only occur on one side? if so, take off the screw to that face and then re-screw it on.

[Jedi5412]

@thebackflipmaster this happened to me it has internal popping unscrew and place the internal part back

[zacintoshcomputers]

thanks alot man!!

[anthcybo]

Why is the orange side purple?

[lolBuNNiiEzZ]

@anthcybo cause tis not a rubiks brand cube

[dubefest]

please help with my comment below

[dubefest]

i did this accept now it wont tighten...as a matter of fact it won't loosen or tighten no matter how many times i rotate the screw.

[thebackflipmaster]

@dubefest the screw must be stuck, or it's tightened all the way. I'm not sure how to help. good luck.

[Om3gaTube]

@dubefest This might be because your core is defected. This has happened on My alpha V core.

[doubleB745]

@dubefest screws probably um, idk the word i forgot, but it broke sorta, and it'll jsut spin and spin, try getting either a new cube or a new screw? thats all i got.

[kckeanu]

my cube is telling me to thank u now,

thanks u saved his life

[lalaoha]

Thanks, you saved my cube ;)

[AssAssinscreed294]

Thanks



[ninja55035]

thanks man

[pokemonhunta]

thank you so much, i fixed my 2x2x2.

[tony41610]

thank you. that was useful =)

[cubedude7]

Thanks for the tutorial dude!

[speedcuber0210]

yes thanks this really helped!

[Seedot0001]

thanks! you just saved my life.

one of the mini center pieces in my cube fell out of place so yeah..

[imsmarturnot1234]

LOL @ 7:07 - 7:17

[RS192]

good tutorial

[jallenf6]

thanks!

[michael123425]

that core looks like the es 2x2 core

[UKSpeedCuber]

It's basically an ES 2x2 with screws and springs.