Sounds great I get my spintechs on monday. I really like the sound of your s i may have to pick up an x pipe also. Did you replace the resonators with the X pipe?
wait all you did was replace the stock mufflers with spin tech and got an X pipe from magna flow?.... and just wondering how much did that cost i looking into for my 04 which is coming soon
It sounds great, dont get me wrong, i just want to sound different than your typical camaro or disgustang. So far it's either the loud mouth 1 or the super pro streets.
It sounds sort of like a truck exhaust on start up. I have the magnaflows on my 06 and its way too quiet, so im searching for a different exhaust. Trying to keep an open mind.
Alright this video just convinced me that I'll be getting an x-pipe for mine. There's a video of a guy with spintechs and an h-pipe, and I like the sound of the x much better. Nice sounding Goat.
are thos 4inch tips or stock the reason iam asking is because iam ordering the same exhaust next week and iam trying to figure out if i should get the 4 inch tips or keep the stock tips
The academy is...
maggied06goat 2 months ago
nice mustang in the reflection there ;)
Mattco92 10 months ago
vw1610, how much horse power gain did you get with this system?
25sportbiker 10 months ago
where did you get the magna flow x pipe and what size ?
hotkeepr7 1 year ago
@hotkeepr7 i think i got it from maryland speed. but that was 3 years ago. i found it on amazon for 80$. and the size is 2.5".
vw1610 1 year ago
This has been flagged as spam show
are these the super pro series? or just pro series?
URLOSN 1 year ago
are these the super pro series? or just pro series?
URLOSN 1 year ago
@URLOSN they are the super pro series. very loud
vw1610 1 year ago
are these the super pro series? or just pro series?
URLOSN 1 year ago
It's the stock gto rear end. Not sure the ratio.
vw1610 2 years ago
3.42 is the gto rear end.
mustangtomiata 2 years ago
@mustangtomiata close stock ratio is actually 3.46
mountaw 1 year ago
@vw1610 3.66 i think
killpeople20 1 year ago
@vw1610 stock ratio is 3.46
mountaw 1 year ago
what kind of rear end is that?
ibanezkid07 2 years ago
dude thtz a '70 Mustang Mach1 in the reflection huh??
327malibu66 2 years ago
its actually just a plain mustang :/
vw1610 2 years ago
@vw1610 you got an LS1 ? Ls2? im thinkin: '63 Chevy II w/ LS2 camm'd...bout 430hp..
327malibu66 2 years ago
its an ls2.
any early nova with an LS engine would be a great ride :)
vw1610 2 years ago
got tha '63...i found an LS1 w/ Tremec for $1k. i really want an LS2 tho
327malibu66 2 years ago
Sounds great I get my spintechs on monday. I really like the sound of your s i may have to pick up an x pipe also. Did you replace the resonators with the X pipe?
stingbee202 2 years ago
wait all you did was replace the stock mufflers with spin tech and got an X pipe from magna flow?.... and just wondering how much did that cost i looking into for my 04 which is coming soon
Mig25foxhound 2 years ago
yes thats all i did.
i think it cost about 160$
vw1610 2 years ago
This has been flagged as spam show
wow that sounds great. i just made a mess in my pants.
codecommando 2 years ago
I like your reflection in your car. You are so sexy
jrichy12 2 years ago
Hey does it sound the same inside when u had the resonator on?
sort117 2 years ago
how much did that set up run you?
gatorbaitallthetime 2 years ago
the x pipe was 60$ and the mufflers were like 40$ a piece. i installed it myself so 140$ total.
vw1610 2 years ago
did you buy them online
gatorbaitallthetime 2 years ago
i bought the spintechs on ebay, i think they are called the "super pro streets"
and i got the magnaflow xpipe from some performance vendor. do not buy them from magnaflow, they charge like 200$ for it.
vw1610 2 years ago
alright man thanks
gatorbaitallthetime 2 years ago
Yea man i got mine for 80 buckaroos from maryland speed.
sort117 2 years ago
thats exactly where i got mine. i can't believe that magnaflow charges like 230$ for the xpipe from there web site.
vw1610 2 years ago
Hey did u notice a change in the sound and power?
sort117 2 years ago
it sounds soooo much better. can;t you tell??
vw1610 2 years ago
Hey did u get the axle back spintech mufflers? or the whole thing?
sort117 2 years ago
i bought the mufflers themselves and replaced the stock ones.
vw1610 2 years ago
It sounds great, dont get me wrong, i just want to sound different than your typical camaro or disgustang. So far it's either the loud mouth 1 or the super pro streets.
1qwkgoat 2 years ago
it sounds distinctly different than a mustang. my buddy has a cobra and compared to his the gto has a more european flavor to it.
ill try to get another video up with me taking off down the street.
vw1610 2 years ago
It sounds sort of like a truck exhaust on start up. I have the magnaflows on my 06 and its way too quiet, so im searching for a different exhaust. Trying to keep an open mind.
1qwkgoat 2 years ago
trust me it sounds like nothing else on the road. it sounds like a pissed off monster... lol
ive gotten many compliments from people while driving the car.
vw1610 2 years ago
i looove how this guy took the cam inside the car aswell!!!
all should da dat!!
5
*
morocanpilot 3 years ago
Sounds great!!
IrishChris1979 3 years ago
Alright this video just convinced me that I'll be getting an x-pipe for mine. There's a video of a guy with spintechs and an h-pipe, and I like the sound of the x much better. Nice sounding Goat.
afguy0127 3 years ago
fuck ya
raulcane 3 years ago
are thos 4inch tips or stock the reason iam asking is because iam ordering the same exhaust next week and iam trying to figure out if i should get the 4 inch tips or keep the stock tips
SSracer192 3 years ago
these are the stock gto 2005-2006 tips.
vw1610 3 years ago
This has been flagged as spam show
Is 1 Chamber Flowmasters louder than spintech exhaust
Kareem2369 3 years ago
i like the stang in the reflection too haha
budntrucks1 4 years ago
how much did that set-up cost you?
whtcanbrwnd04u 4 years ago
80 for the spintechs and 80 for the x pipe. and installed by myself for free:)
vw1610 4 years ago
did you bolt the x-pipe on the flanges where the resonator goes, or did you just cut and weld it? also, whered you get the x-pipe?
sleepyta 4 years ago
sorry for the late response.
i had to cut and weld the x pipe in place. i bought the x pipe from an aftermarket company for 80$. i forgot the name of the company.
vw1610 3 years ago
thats niiiiice
whtcanbrwnd04u 4 years ago
Are you getting any drone with this set up?
CelestialGhoul 4 years ago
is this with the resonator deleted?
Landshark1 4 years ago
yes. you cut the res. out and place the xpipe in its location.
vw1610 4 years ago