KJW Full Metal M1911 Tactical Airsoft Gun Review

[englishmuffin909]

Co2 will not blow the slide off.I haven't been able to get green gas for about 6 months now and have used co2.you just have to oil it.

[TTThienTN]

If you are going to use CO2 Mags, keep your gun lubed well... Or like use green gas once in a while to get the lube in the gun. This gun is CO2 Ready that is why it has the red gas nozzle. Non co2 ready are black or white (information from airsoftgi) It is good to have a green gas mag for lubing. but you can also use the co2 mag, press the gas release button (empty) and spray silicon for a second or 2, then put co2 in, then it will be like green gas, just as co2 with lube but stronger.

[mrAmazing607]

Hey I was close

[FuckOff907]

lol u say the gun is really nice like 50 times

[TheFuggedaboutit]

1 question, I'm new in Airsoft because i paintball and I'm going to be an Airsoft sniper, CO2 can make the slide fly off? and i also heard green gas in propane, is that true?

[likeaboss130]

@TheFuggedaboutit Its basically propane without silicon. Which means it won't lubricate.

[1Peezy1]

...Isn't it TM compatible>?

[FrontlineFighterz]

actually the co2 mag works much better than the gas mag.

[counkev]

Is it good on gas, for example how many mags could you get off with a 5 second hold of gas ?

[mrxxhockeyxx]

does it come with a orange tip

[TheCrazyfaith]

what gram of bbs does this gun need to use?

[aaron3378]

@TheCrazyfaith .20 works great!

[mrAmazing607]

@aaron3378 You from Georgia or Texas

[aaron3378]

@mrAmazing607 Louisiana

[guitargamer57]

@mrAmazing607 I'm from Georgia but my parents are from New York and they passed down the accent

[AlliedAirsoft]

@TheCrazyfaith if you do less than ,20 you will break the gun eventually. there are 2 reasons for this: first the .12 bbs are almost always very badly made, and second they are so light that they tend to give the cylinder the same effect as dry-firing. (firing without a bb)

[Tbone155817]

@AlliedAirsoft Dry firing doesn't really matter all that much for gas guns, but you are right about .12's being badly made, I haven't ever seen any high quality ones.

[ApotheosisCM]

Get it from evike for $110 with a co2 mag for an extra $10

[GhillieMadness]

there is spare parts

[Airs0ftisMylif3126]

on evike this gun is only $109 so im thinkin of gettin it but then buyin the bb's and green gas is alot.Also how long will the co2 last?and do u fill green gas every mag?

[latdum]

did u chrono it does it accually shoot 330? because im looking for a pistol with blowback 330 fps or higher and this gun looks really nice

[aaron3378]

@latdum yea it might even shoot a little harder

[latdum]

thanks

[NockomuraLock]

ittl shoot harder if u get c02 go to evike and get the 2 mag upgrade its $10 less than gi and u can get an extra mag for 99c since this is a hi-cappa

[zune1421]

a better gun is the G&G Xtreme45 CO2 Blowback Pistol

[aaron3378]

@zune1421 eh not really this gun shoots really straight and far

[RebelPeach]

that gun is ok but 1, its farther from realistic, 2 with this u can use 2 different gas types. and this is full metal, i believe the frame on the Xtreme45 is plastic

[aaron3378]

@RebelPeach yea i have the off brand that 65 dollars same thing but full metal itsalot better

[amazinglyawesomedude]

use co2 just put silicone oil in it. it will be fine.

[zune1421]

umm the G&G Xtreme45 has more way more power and is cheaper and shoots 400+ fps also is very effective in long range wars

[Sillyasian4]

Wait, is Co2 bad? Because Co2 is the only access i have

[aaron3378]

@Sillyasian4 no but my friend has the same gun i do and his co2 mag fucked up the inside of gun but dont use c02 or green gas in the cold cause it wont work properly

[Wes945]

i think the worst co2 did to my gun was cause a shit load of slide jams and when this happens the barrel gets pushed forward and stops the slide mid cycle and if this happen and you dont fix it in time your gun could realase all the gas and thats not fun. also co2 can cause some bending of that slide release pin. it does work ok when it gets colder around like 50-60 but not when its any colder or the gun fires sporaticly. i tried it and it went auto on me then failed to cycle properly...

[Nazipankake]

wait im confused. completely ignore the whole co2 thing? cause i dont want to blow the top off.

[derka6262]

@Nazipankake this gun comes co2, green/red gas, and propane ready. ;)

[bluesman7788]

If CO2 caused problems they wouldnt sell CO2 mags also if you get tired of those scratches just take the gun apart and sand the barrel give it a nice tarnished look

[zzDoubleAzz]

The gun comes CO2 ready so it wont blow up. Ive used CO2 in my gun

[bf2142dude]

1. did u paint the tip black?

2. where do you buy the CO2 from?

[aaron3378]

1 yes

2. walmart

[bf2142dude]

what stores sell CO2 cans to put in the mags?

[Chiles]

If I'm correct, I see a .12g BB in your magazine, which will murder your gun. The CO2 mag isn't causing any problems, this gun is CO2 ready. What will mess it up is using those cheap BB's because at the velocity they come out they will shatter inside the gun and it'll be like running sand through a gearbox.

[SFEphobos]

CO2 doesn't do anything to this gun. I've been using mine for a year now running nothing but CO2 and I have had no problems.

This is a GREAT sidearm though. Everyone who plays airsoft should have one of these.

[TheAirFred]

I used mine with co2 (without any silicon though) and after like 6-7 co2 capsels, my loading nozzle broke in two pieces. But this is a really high quality gun, but my problem was that i used co2 without spraying any silicon on my bullets. Now its repaired but, i will never use co2 on this gun again...

[rmendyb91]

should you use silicon as well? or only co2 is straight?

[asimonds422]

people just dont know how to use silicone oil,and blame CO2 when its a c02 ready gun

[Kkr3wK]

Is that a .12g bb i See?

[nicolas9101]

I highly doubt it would blow the top off with co2 because the gun is made to be used with co2 as it says right in the title on airsplat.

[rejcted]

can you use co2 (not the cartridge) from paintball canisters in place of green gas?

[aaron3378]

Im not sure if it would fit

[hotwheels526]

i wouldnt. ive read some things online and the say the worst thing to do to a gun is to use co2 on a pistol from sources other than canisters

[driftinsti]

actually Tokyo marui hi-capa 5.1 parts are compatible with this gun. You can get spare parts at hong kong retailers