How to Make a Full Auto Airsoft Mini Gun [Halo Inspired Mobile Turret]

[juniorscasual]

vete al ´pilin 

[chance1234asdf]

dude, i love you so much right now! you just fuking blew my mind

[lbgundead]

Cool ideas man, keep up the good work

[thatmidget22]

could i put two handles on each side instead of one? or that wouldnt work? cuz i think it would look cool with two handles

[butterypopcorn99]

It's too gangster for me man!

[Karl23extreme]

pyro is heavy!

[Karl23extreme]

it's basically a strafer...

[Jester7941]

This is a great idea my only question is how long does it tend to hold enough pressure for firing before needing to be re pressurized again?

[MarSOCftw]

What size did you drill the hole because mine keeps leaking.

Please help..

[Nighthawkinlight]

@MarSOCftw The only hope to fix the leak is to coat the hole and the threads of whatever is threaded into it with PVC cement. Screw the fitting back in and wait 24 hours before testing.

[MarSOCftw]

@Nighthawkinlight Thanks what size drill bit did you use or did you tap it.

[Nighthawkinlight]

@MarSOCftw I don't remember. I used a stepped bit until it was the right size for the threads to bite into.

[cool248dj]

@Nighthawkinlight going to make this with my dad thx for the video

[Megachibitan]

which one holds better pressure? (bottle or pvc pipe)??

[Nighthawkinlight]

@Megachibitan PVC is rated to higher pressures, but a bottle is safer because it would cause less damage if it burst.

[RawrsRazium]

Just a quick question, is it possible to modify this design so that it shoots the ninja darts made for the hand cannon? I've done it but it would be nice if you posted a video to show you doing it.

[Nighthawkinlight]

@RawrsRazium All you need to do is push one down the barrel and it will fire.

[rmhoutz]

Ever taken this to a chronograph do you know the FPS? Schedule 40 max PSI is 106 lbs ever taken it up beyond 60lbs?

[Nighthawkinlight]

@rmhoutz I don't know where you learned that sch40 was only rated to 106 psi, but that's incorrect. It varies depending on the size of the pipe. My 2" is rated to 280 psi, 1.5" at 330, and 1/2" over 500. My normal operating pressure is 100-120 psi.

[rmhoutz]

@Nighthawkinlight Sorry I got my info from engineeringtoolbox com but I was basing that pressure off of 6" pipe I thought that is what you used for the air chamber. Being the pressure is higher for 2" and you use 100+psi have you used a chronograph to determing the FPS?

[Nighthawkinlight]

@rmhoutz No, I don't have one. Maybe eventually.

[UMCWarrior]

what size drill bits did you use

[rytardedRYAN]

nighthawkinlight > kipkay

[mrproffer1]

holy crap this is awesom!!!!!!!!!!!!!!!!!!!!!! how did you ever make this wwwwwwwwwwoooooooooooooooooooo­oooowwwwwwwwwwwwwwwwww cool vid thanks

[ItEaChUsTuNtS]

Wait What tools Do I need?

[ItEaChUsTuNtS]

Thanks.Now I can Kick my friend's ass in Airsoft. He owns a 200dollar "Automatic Rifle" Let see him Face my 50-60dollars Machinegun.

[berskergan]

people read the description it costs around 50-60 dollars

[noble6andchief]

how much does it cost does it make

[noble6andchief]

how much does it cost

[jacobaley]

wander how hard it would be to mod it into a semi auto sniper...

[ROFLMAORYSST]

The glue you used, is that epoxy? Do you need to outside to use it? I've heard its dangerous stuff :P

[Nighthawkinlight]

@ROFLMAORYSST PVC cement. It is made specifically for this purpose. The vapors are strong and very flammable, so you do need to be outdoors or have good ventilation to use it.

[00legoman00]

Lol sounds like it farting

[awiao]

Glad my dads a plumber!

[mathieuhebert17]

@Nighthawkinlight Can i use a CO2 bottle with an adapter so it can attach to the gun?? And i would use ABS plastic tubes, not pvc.... would that work??

[250yzyamahamaster]

@mathieuhebert17 that would work, but you would go broke from all the co2 you would go through. and the abs would be more flimsey. i would stick with the original design bro.

[WhatzzHisName]

Hey this is really cool I was just wondering if there would be anyway to get a bigger mag capacity and I was also wondering how long you can shoot without loosing pressure?

[01eggy10]

the smallest tubing i can find is 6.2 mm. will that work pretty good.



[Nighthawkinlight]

@01eggy10 If it fits the pellets it will work fine. You can also use a brake line from an auto parts store like I do in my most recent video.

[AndrewJGames]

what is fps is it more powerful than 15$ make

[MrJorrritt]

0:39 Wet Fart XD

[IceWolve67]

How long and how far can he shoot ?

[toxicapathy]

I absolutely love your idea here. Do you think there'd be a way to do something like this, but more like a bolt action rifle? Just wondering, as stopping to pull out a bike pump up for a few minutes after 10 seconds of shooting seems like it'd be a pain.

[Nighthawkinlight]

@toxicapathy Single shot, yes. The same way real airsoft guns operate with a piston. Multishot, possibly. There is a design I've been working on that could be quite effective, but I've been doing a lot of airsoft videos recently and might save that idea for the future.

[toxicapathy]

@Nighthawkinlight I was talking about single shot haha. Multishot with bolt action would just feel awkward in my opinion. Any idea what the fps would be on something like this?

[Nighthawkinlight]

@toxicapathy Single shot you are way better off to just buy an airsoft gun. There's no way you could make something half as nice as a factory made airsoft sniper rifle for any less money.

[toxicapathy]

@Nighthawkinlight Kinda what I figured. No harm in asking though.

[LouTan1996]

In case of zombie apocalypse Im coming to your house

[dooch9]

Pause at 0:15. Fuck Yeah.

[TeoFirefox15]

omg beautifullllll

[kule48]

you're great

[EZnewby]

What would the fps be with .20 gram bbs?

[IceWolve67]

I didn't get it ( sorry , I m not english but I ll try to explain ) the air reservoir in filled with a compressor or just with a pomp for bike ?

[mariyuso]

@IceWolve67 with a bike pump

[68Boer]

how many fps is it

[SlowDownSmutty]

How do you make an airsoft nuke ?

[UMCWarrior]

What kind of blow gun did you use because all of the ones I found weren't usable for what you did? I want to use it as a trench clearing device btw.

[Nighthawkinlight]

@UMCWarrior It was an older model that probably cannot be found anymore. There are plenty out there that will work though. Or you could make the machine gun I show in my most recent video featured on my channel instead.

[BlackLegionAirsoftTV]

@Nighthawkinlight Hey i was wondering could this work with multiple barrels and how exactly does this work, because i want to make a airsoft machine gun based of you like design but with a different look. Would you mind explaining, does it all work through air pressure? like when you release the valve air is let into the barrel/ammo tube and forces bb's out? or is it another way?

Thanks! :)

[crazywhiteguy135]

The gun is great, but i was wondering how you would attach a bi-pod to this gun and a sight?

[JonahBabona]

Could you use a bigger tube for the bbs so you can get more in there? 2 handfuls of bbs at 50rps isn't very much...

[Woahbegoners]

Hey I love the idea, any chance you might know how to make one that uses paintball CO2 tanks as a power source? I need a stationary/portable machine gun for my position as a tanker, but while looking badass at the same time. any chance you attempted this?

[Nighthawkinlight]

@Woahbegoners It's not a good idea to use CO2 in PVC because it gets cold and makes the pipe brittle. If you watch my most recent video though you will see a different sort of machine gun that could be made just as accurate and powerful as this one if you used a longer barrel. In the next few days I will be uploading a video showing how to attach that machine gun to an air chamber that can be carried around in a backpack (or mounted to a tank).

[zacski56]

Do you have the Fps?

[WOOTWOOTHALLA]

Not bad dude.

[907867yt]

Ice wolf he uses a bike pump dumbass. You could usea compressor if you wanted though

[sunshinebrand]

resevwire



[IceWolve67]

Can anyone explain me, did he use a compressor to reload the gas ?

[TheGreenbeanman]

@IceWolve67 its not gas its air

[XxDeathHead12xX]

You just made me into the....JUGERNAUGHT HAHHA

[TheThelegend684]

this guy is like parkers tutorial

[TheGreenbeanman]

how much would all of this cost?

[MuffinKnight101]

what is the fps on this

[MuffinKnight101]

what is the fps on this gun?

[1000nerfboy]

1:59 he said elmo instead of elbow

[xXJRD913Xx]

0:32-0:39 it sounds like someone farting.......

[n0Cma]

how long can it shoot with one air load ?

[pandadude321]

2:43

[sam1000H]

dont forget to paint the tip

[sf2400]

lol at 0:32 it sounds like the gun is shitting out some juicy ones

[visser396388]

Great videos love em! I was wondering if it was possible to create the air compartments into a backpack and possibly enlarge them and wear it on your back while you extend the hose and then use the gun? To where it kinda looks like a flamethrower?

[puckhound95]

Do a "How-to" on a flashbang grenade for airsoft. Like one that would legitimately blind and deafen but on a minor scale.

[madlaxgoalie98]

what is the fps on the gun and how long can u keep shooting the gun also r u a blue to convert it to battery powered

[onlyspitfire]

ffs, its aluminium, not aloominum, and reservoir, not reservwyer.

[LukeNoShizz]

26 people live in a town where there's no home depot nor lowes

[JoshuaDaPeck]

can you figure out how to make a much cheaper one of these i'm really short on cash so that would make me super happy. and you should put a bipod, grip, crude sight. you should try to design it from 25-35 bucks. i'm going to a airsoft game on april 21'st and need a cheaper weapon like this to be used on a jeep. and also for shits and giggles :P . . . also i dont want to sound stupid but this would make me SOOOO happy if you did :)

[Nighthawkinlight]

@JoshuaDaPeck I guess it's your lucky day. Just yesterday I posted a new version that can be made for $15. Check my channel.

[JoshuaDaPeck]

@Nighthawkinlight do you know who easy this is to do? i might wana try to make my own version.

[JoshuaDaPeck]

@Nighthawkinlight Dont take offense but that kinda was just thinking something like this rather than a pistol type thing. i kinda need something to be mounted on a vehicle . does it realy matter how you design it or hypothetically could i make it somewhat different than this?

[Nighthawkinlight]

@JoshuaDaPeck The bigger you want to make it the stronger the materials are going to need to be, so you will have to spend more money. Redesign however you want though.

[MrDrAlfonso]

@Nighthawkinlight hey nighthawk... i have a very important question how much pressure do u think pvc pipe can hold with air pressure? b/c im planning on making a paintball flamethrower or "paint thrower" i have the idea on how to make it but will 5in diameter 2ft long pvc hold up to 50~ 100 psi?? without it exploding? thanks alot b/c i dont want to explode lol!

[Nighthawkinlight]

@MrDrAlfonso If the pipe and every single fitting is pressure rated, AND if you use the proper methods to prime and glue all fittings. PVC is not made for air pressure, use no more than half of the printed rating on the pipe.

[MrDrAlfonso]

@Nighthawkinlight ok thanks alot and thanks for a very quick response. so just to be clear if i have a pipe rated for 300 (psi meaning water pressure for pipes) i should be safe to use 100 (i dont plan to go over 100 psi ever) so i have nothing to worry? thanks alot u helped me from exploding lol!

[Nighthawkinlight]

@MrDrAlfonso I can't guarantee that for you, it depends how good of a job you do putting it together. If it's done right then the pipe rated for 300 should have no trouble holding 100, but that doesn't mean you don't have to be careful with it. PVC is brittle, and if you drop a pressurized tank on a hard surface it can explode no matter what the rating is.

[JoshuaDaPeck]

@JoshuaDaPeck I know what im asking is kinda stupid and not possible but also if you could make it hold LOTS of ammo and maybe abble to shoot for a while without pumping that would be cool too.

[JoshuaDaPeck]

fps? I want to use this at a airsoftgame but i dont want to hurt anyone.

[SnAk31580]

would you recommend shooting someone with this gun

[Numbah1Namek]

Would it be possible to invert the design of this project so that the blower valve is facing downwards instead of upwards to mimic the structure of a M249 SAW or other Light Machine gun type weapon? If so, would mounting a bi-pod be possible?

[Nighthawkinlight]

@Numbah1Namek Yes & yes.

[SuperSpaucy123]

You must really piss off the home depot employes if you ask where any of this stuff is.

[sls567]

25 people were turned into aluminium cola cans for him to shoot.

[BrandonKAli]

hey man great videos question though whats the range ?

[MrRainbowdust]

that is badass bro

[airshitfuker]

how long does the compressed air last while firing the gun?

[Nighthawkinlight]

@airshitfuker 10 seconds or so of constant firing. If you would like more duration the air chambers can be made larger.

[shaphown]

Does anyone know the fps of this weapon?

[stealthball29]

0:32 - 0:40 sounds like one of my farts

[DANisTHEman812]

Dayum!!!

[CheifPwnsanoob]

@Nighthawkinlight It sounds like a fart. :O

[THEMAKER888]

at 4:20 if you sanded the letters and crap off the end caps flat you could get a perfect seal between them :)

[itsadeadmansparty]

ahahahaha So Awesome! man your good at designing, your really good!

[Tacomylizzzard]

Can you adapt an co2 canister to it?

[mozarkozark]

I did it.

[theclubdog]

what is the range

[Zorleboss]

+1 for @NightHawkIL ...After doing my shopping list for the build ... I discovered this little detail is an essential detail right? ... So I asked in a way ... rather hostile and not at all polite. I offer my sincere apologies To have said that it was a fake. =/

[commander187]

@Nighthawkinlight I am gonna build one similar to yours for my tank with a clean out instead of a plug so it can be reloaded in the turret if necessary. Thank you for the info.

[Nighthawkinlight]

@commander187 Wait for my new video in a few days. I will be posting a new type of airsoft machine gun that you may want to use instead.

[commander187]

@Nighthawkinlight Right on.

[mathieuhebert17]

@commander187 could you post a video about it??!!

[commander187]

@mathieuhebert17 The gun or the tank?

[mathieuhebert17]

@commander187 the gun! please!

[136steeler]

what fps



[TeamOneBillion]

[✔ Like] Hey Ben!! So is that your Twitter account or someone else make it? @NightHawkIL and are you from Illinois too? JW.. Check out my videos, I have 2 that I have made with your insperation. It would be awesome if you could use one as a video response!ol Thanks and love the videos! Oh and btw I am @TeamOneBillion on Twitter and will get you many followers so check you twitter here the next few days and watch it grow!! Anyone else wants #Promos you know where to find me!

[BlackOpsSkidoo]

possibly the most epic thing I've ever seen

[opticscratch]

What kind of valve is it

[min4899]

Kinda reminds me of team fortress 2 pyro flamethrower

[MynameisScruffy]

@Zorleboss the flow of 60 psi air is enough to pick up a .12 gram bb and where else can the air escape along with the bbs but out the barrel

[Phantom3575]

that sounded like me on a toilet last night

[mathieuhebert17]

Can you also make the shooting longer.... more psi or more psi capacity???

[mathieuhebert17]

can ii use ABS pipe???? cose its i think allot safer??? ohhh ya can i make the bbs capcity higher and make th rond per second lower!???? Please help

ps: nice freacking work! i love it!

[Zorleboss]

The BB's CAn't go in the barrel' , this Vidéo is just a FAKE

[MynameisScruffy]

check out EZ airsoft gun video same prinicple in both videos

[Justis302]

You should load it with fire ants

[Nighthawkinlight]

@Mojotronic I'll be posting a video soon of a simpler design that will work better in a flamethrower style. I do not recommend a portable air compressor because they are able to reach dangerous pressures in PVC.

[Mojotronic]

@Nighthawkinlight i looked the PVC up so it has a pressure holding up to 10 bar, the compressor can only produce 2,8 bar...

or would the compressor produce so long 2,8 bar till it would blow up?

[minichinny1]

@Nighthawkinlight hey love the vid you should put on a handle so it would be easier to shoot

[Mojotronic]

i have a question..

i got the idea to use a 12V battery (such as a car battery) with a mini compressor (air compressor with 12V up to about 2,8 bar) as energy for the mini-gun (i would design a backpack and have it like a flamethrower from WW2 if you know what i mean)..

right now my problem is should i use a "air-tank" and then put the rest (barrel etc.) at it or can i just leave it away

and how should i attach the bullets the best way (as a tank directly at the barrel or backpack with a hose)?

[Obsidianpaintingfan]

how far into the ammo tube do you put the aluminum tube?

[Nighthawkinlight]

@Obsidianpaintingfan It doesn't matter. If it's flush with the inside of the end cap that will be fine.

[orpingtondood]

@Nighthawkinlight its a sort of suction force that carries the bb's through the tube right ?

[lootingtoday]

KIPKAY?

[8602970]

how do i know when to stop puttin the barrel in???

[Mrmodernwarfare2ify]

will it mess up if u make the ammo barrel any bigger or attatch a ammo clip to it plz respond

[shaneorocks123]

LJHJJJJJJJJJJJJJJJJJJJJJJJJJJJ­JJJJJJJJJJJJJJJJJJJJJJJJJ67RRR­RRRRRRRRRRRRRRRRRRRRRRRRRRRETE­TETETETETETETETETETETETETETETE­TETETETETETETETETETETETETETETE­TETETETETETETETETETETETETETETE­TETETETETETETETETETETET8RH9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9H9H9H9H­9H9H9H9H9H9H9H9H9H9H9H9NNNNNNN­NNNNNNNNNNNNNNNNNNNNNNNNNNNNNN­NNNNNNNNNNNNNNNNNNNNNNNNNNNNNN­NFMRRRRRRRRRRRRRRR8.

[ZACY29]

Will making the ammo chamber bigger affect things much?

[Nighthawkinlight]

@ZACY29 No, should work fine.

[shaneorocks123]

and also range  :0

[shaneorocks123]

fps anybody

[xXCREEKSTARXx]

@shaneorocks123

It smashed right through the cans so i would say its like 350 Fps, atleast.

[shaneorocks123]

@xXCREEKSTARXx

Thanks looks awsome and sounds epic

[tideboy123]

any idea on price on all of the stuff

[justpocketg0dman]

lol gunna make one and shoot pp:p

[mymetalworks1]

dose it hurt



[Thechaucer84]

like for those who waited for adds 0:01

[DCwurk]

made one today it is amazing man you'r really smart and i used it in a airsoft war and i let my friend shoot me and i had it a 80 psi woooooo it left some marks ahahah but again thanks man really cool

[mushmush161]

:0 i made one of these about 2 years ago... different design (my own) but works the same way. i also know of improvements but i have yet to implement them because of cost. i need an extra $100 :L

[CelticRocker42]

can I make it hold more ammo?

[250yzyamahamaster]

@CelticRocker42 put a larger diameter PVC chamber for the ammunition compartment. it wont affect anything other than carrying capacity!! Hope this helps ;)

[Captbuckshot]

im thing make it in to like a flame thrower with a back pack with like 4in pipe

[250yzyamahamaster]

Okay man!! Thank you so much for this video!!! Most definatley building one!!!!!

[SuperBennettboy]

this guy is smart

[FxPred]

would this actualy be practical for airsoft?

[jasonbob78]

@FxPred sure why not

[ryanram98]

THANKS for the tutorial! my dad, brother and I spent all week end making it but we would have had it done friday night but we bought a wrong part lol, it works prety good, it shoots like a shotgun and has a lot of power but we are probably puting more than 60 psi in it and we used a plastic basket thing and it tore it up lol

[EDit23452]

do you how how much fps it shoots at?

[burningsponge]

by the way, is there a place to get 4.5mm pipe? so you can use those metal bb's used in red ryders and hunting bb guns?

[Nighthawkinlight]

@burningsponge Steel brake lines come in many sizes.

[burningsponge]

wait, so it's like a pneumatic potato cannon with a hopper and 6mm barrel?

finally! something i can make!

[MrJarednator]

is that just a regular tire pump?