and the thing is HE INCHED HIS WAY IN CUZ HE WASNT SURE IF IT WOULD FIT CUZ THE PILOT TRUCKS LEFT HIM..... IF THEY WOULD HAVE LISTENED TO HIM THEY WOULDNT HAVE HAD SUCH A PROBLEM OF COURSE HES MAD WHEN IDIOTS ARE TRYING TO BOSS HIM AROUND
omg seriously he driver truck for a living and cuts steel with torches for a living.... fisrt cutting the eyelets would have worked and second BACKING UP WOULD HAVE WORKED HE BARELY WEDGED IN . all they had had to do was back up the traffic third its sooo not his fault his pilot cars ditched him a little ways back THAT MAN HAS DRIVEN MORE KMS IN REVERSE THAN THOSE TWIGS HAVE FORWARDS.....
This is the second video clip of this show I've ever seen, and again these Ohare towing guys are proving to be completely incompetent. It'd take an Oxy-Acet torch set about 10 minutes to cut through each of those eyelets. It's not rocket science, but then again neither is driving a tow truck so I'm confused as to why they're having such problems.
driver -1 for getting caught but you will notice he in fact is not stuck he just needs to cut off the lifting eyes so he can go ahead..probably was on route..in chicago oversize can be a crap mshoot especially if your from out of town and happen to make a wrong turn.... this just reinforces my opinion that Joey is an grandstanding amateur.. he don't know if his torch can cut it.. what an idiot. and on tv.. hahaha
That driver was an idiot. What made him think that he could dictate with the tow truck driver when the d":"khead got it stuck under there in the first place. You have sooo much patience with your "customer". In New Zealand he would have received a huge fine and lost his licence for at least 6 months for dangerous driving. bloody idiot. Good work Ohare.
@rawiri091 thing is he wasnt stuck.... if they would have listened to him in the first place none of this would have happened,.... yes the wires were in the way that was the only thing stopping him for getting out before they all showed up
It seems that not many people like this company.... Why is that??? i'm from the uk so dont know them. We were meant to get the show here but have'nt yet.
Joey dont know what the fuck he's talking about or he dont know how to use a cutting torch. and if the truck driver tells him to cut them off the liability is on the truck driver so shut the fuck up and cut them off!
@mrbobie93 i've cut railroad track with a normal torch just takes a while. and if youre doing recovery work such as o'hare claims to do you should have a good sized torch to start with. maybe if you had ever used a torch for more than sweating pipes you'd realize it
lol it was the truck drivers fault the truck got stuck to begin with. the dumb ass took a 14ft 3" load under a 14ft bridge. i guess basic math skill are not a pre-requisite to be a truck driver........
@SuperTransmission ;Torch the eyes off? Then what? those eyes are there for loading & unloading this unit off the trailer. You think Ohare's bill will be big for getting him out, wait till he gets to the receiver, & see the bill for the crane used to unload this unit, with no eyes. Once they are cut off, you can't just weld them back on. Those eyes are a part of the frame ,so if you cut them off, you have to rebuild the whole thing!!!
nice vid the driver stood up to ohare thiefs dont ever get hooked by these pricks
they will give you a bill that looks like a phone number . fat ass bill and down syndrome joey will fuck your ass hard and you can park a wide and high load in your ass when these fucks are done with you
@drumaster24 i've been under that bridge theres a dip in the road under it and until you haul some stuff like this i guess you dont realize that the state of illinois and cook county do this shit to oversize loads all the time.
I could cut the whole thing up an put it in a skip in an hour with a gas axe with a 1/8 nozzle never mind two lifting eyes. But wheres the torch, all i see is a disc cutter dumb ass. I guess your charging by the hour and making the job last
@cmscania1971 exactly .....cut the shit or go home .....talk about milking a job
the guy with the oversized load is about to be in deep sh*t when his permits all run out he will get 2 sit on the side of the road for a week or more. that is why he has no time to play f*ching kid games!!!
@piglett2195 I agree. I'm no tow professional, but damn they just talk about milking it. Tow driver wanted to back out, they wont let him. UMM, its his truck, NOT Ohares! Again they just try and milk the bill. "HOld on sir we have 3 more rigs on the way and a flagger!"
and the thing is HE INCHED HIS WAY IN CUZ HE WASNT SURE IF IT WOULD FIT CUZ THE PILOT TRUCKS LEFT HIM..... IF THEY WOULD HAVE LISTENED TO HIM THEY WOULDNT HAVE HAD SUCH A PROBLEM OF COURSE HES MAD WHEN IDIOTS ARE TRYING TO BOSS HIM AROUND
TheRawrYA 3 weeks ago
omg seriously he driver truck for a living and cuts steel with torches for a living.... fisrt cutting the eyelets would have worked and second BACKING UP WOULD HAVE WORKED HE BARELY WEDGED IN . all they had had to do was back up the traffic third its sooo not his fault his pilot cars ditched him a little ways back THAT MAN HAS DRIVEN MORE KMS IN REVERSE THAN THOSE TWIGS HAVE FORWARDS.....
TheRawrYA 3 weeks ago
This is the second video clip of this show I've ever seen, and again these Ohare towing guys are proving to be completely incompetent. It'd take an Oxy-Acet torch set about 10 minutes to cut through each of those eyelets. It's not rocket science, but then again neither is driving a tow truck so I'm confused as to why they're having such problems.
gymkhanadog 2 months ago
Yeah, no way a standard torch would cut through full 2 in. steel, that thing is a massive heatsink - it takes a good torch to heat it up enough.
WowMike2002 7 months ago
if the lifting eyes or 2 in thick hes not going to cut with a standard torch, good call !!!
grumpydumper 10 months ago
driver -1 for getting caught but you will notice he in fact is not stuck he just needs to cut off the lifting eyes so he can go ahead..probably was on route..in chicago oversize can be a crap mshoot especially if your from out of town and happen to make a wrong turn.... this just reinforces my opinion that Joey is an grandstanding amateur.. he don't know if his torch can cut it.. what an idiot. and on tv.. hahaha
richardtheone 11 months ago
Maybe Joe could have tried with the torches . Looked pretty easy and fast to me .
harveysims 11 months ago
That driver was an idiot. What made him think that he could dictate with the tow truck driver when the d":"khead got it stuck under there in the first place. You have sooo much patience with your "customer". In New Zealand he would have received a huge fine and lost his licence for at least 6 months for dangerous driving. bloody idiot. Good work Ohare.
rawiri091 1 year ago
@rawiri091 thing is he wasnt stuck.... if they would have listened to him in the first place none of this would have happened,.... yes the wires were in the way that was the only thing stopping him for getting out before they all showed up
TheRawrYA 3 weeks ago
Shoulda read the permit. Shoulda read the 14 ft sign.Shouldn't got the "Swift" equivilant heavy hauler outfit.
keendriver2753 1 year ago
Driver is an asshole. He needs the dick smacked out of his mouth.
Audiolaboratory 1 year ago
where is the rest dont start if you wont finish
taterheadkiley 1 year ago
It seems that not many people like this company.... Why is that??? i'm from the uk so dont know them. We were meant to get the show here but have'nt yet.
philly780 1 year ago
It seems that not many people like this company.... Why is that???
philly780 1 year ago
poor truck driver, just trying to make a living. all of this assholes just there to suck out of his misery and love in it
bykashka75 1 year ago
Joey dont know what the fuck he's talking about or he dont know how to use a cutting torch. and if the truck driver tells him to cut them off the liability is on the truck driver so shut the fuck up and cut them off!
truckerjay1 1 year ago 6
@truckerjay1 i want to see you post a video of you cutting through 2 in steel with a standard torch.
mrbobie93 10 months ago
@mrbobie93 i've cut railroad track with a normal torch just takes a while. and if youre doing recovery work such as o'hare claims to do you should have a good sized torch to start with. maybe if you had ever used a torch for more than sweating pipes you'd realize it
truckerjay1 10 months ago
Dislike this teaser shit. Fuck speed channel.
wsbowdown1 1 year ago
lol it was the truck drivers fault the truck got stuck to begin with. the dumb ass took a 14ft 3" load under a 14ft bridge. i guess basic math skill are not a pre-requisite to be a truck driver........
MegaSuxification 1 year ago
@MegaSuxification wrong it was the pilot cars that had the info on the hight and they left him
TheRawrYA 3 weeks ago
man fuck that driver joe an trike are jus doin there job to the best of there abilities plus you know there risking there lives everyday. thumbs up
MultiMonster69 1 year ago
@MultiMonster69 joe should have listened to the driver he knew what he was talking about trust me
TheRawrYA 3 weeks ago
# 2 tip will cut 2'' of steel get out of the way dumb ass joey give the guy the tortch
stupid ass. they should show the rest of this vid no doe joe goes home with no money ha. ha.
SuperTransmission 1 year ago
@SuperTransmission ;Torch the eyes off? Then what? those eyes are there for loading & unloading this unit off the trailer. You think Ohare's bill will be big for getting him out, wait till he gets to the receiver, & see the bill for the crane used to unload this unit, with no eyes. Once they are cut off, you can't just weld them back on. Those eyes are a part of the frame ,so if you cut them off, you have to rebuild the whole thing!!!
cowboyblue55 1 year ago
nice vid the driver stood up to ohare thiefs dont ever get hooked by these pricks
they will give you a bill that looks like a phone number . fat ass bill and down syndrome joey will fuck your ass hard and you can park a wide and high load in your ass when these fucks are done with you
SuperTransmission 1 year ago
Don't waste your time watching this. The clip is only a teaser.
ULTRA1BOB 1 year ago
I know I can't see how many axles there are up front,but there is only 5 at the back,so who counted 15 axles on this rig?
chuck738 2 years ago
this wouldn't have happened if the dumbass driver would have paid attention to the height of his trailer.
drumaster24 2 years ago 9
@drumaster24 i've been under that bridge theres a dip in the road under it and until you haul some stuff like this i guess you dont realize that the state of illinois and cook county do this shit to oversize loads all the time.
truckerjay1 1 year ago
@drumaster24 this wouldnt have happened if his pilot cars hadnt have left him
TheRawrYA 3 weeks ago
@drumaster24 its the fault of the pilot cars that had the height info and left him before he got to the bridge
TheRawrYA 3 weeks ago
flatten the tyres?
Ripzta13B 2 years ago
I could cut the whole thing up an put it in a skip in an hour with a gas axe with a 1/8 nozzle never mind two lifting eyes. But wheres the torch, all i see is a disc cutter dumb ass. I guess your charging by the hour and making the job last
cmscania1971 2 years ago
@cmscania1971 exactly .....cut the shit or go home .....talk about milking a job
the guy with the oversized load is about to be in deep sh*t when his permits all run out he will get 2 sit on the side of the road for a week or more. that is why he has no time to play f*ching kid games!!!
piglett2195 1 year ago
@piglett2195 I agree. I'm no tow professional, but damn they just talk about milking it. Tow driver wanted to back out, they wont let him. UMM, its his truck, NOT Ohares! Again they just try and milk the bill. "HOld on sir we have 3 more rigs on the way and a flagger!"
studpuppy69 1 year ago
nice video!
zanjani13 2 years ago