How to Build a BB Machine Gun

[rexmorgan72]

I really enjoy the simplicity of your videos.  One really can get a basic understanding of some complex principles and expand upon them.

[InYourAtomicFace]

I'm looking for a video thats very cheap and easy but It's not to bad. Like I don't want a pen airsoft gun but neither do I want to buy a lot of parts... So do you guys have a video.

[lengzai981]

i wan to make

[Neil461]

have you built the bbmg using the exact plans on burnt latke?im still making the vortex right now but was woundering how this gun works and if i should just keep the vortex black and use some different plans

[porthopebloodboy]

all u need is ...holy fuck ....screw that

[pepsicolaromania]

WHY IS THIS FLAGGED????

[luke3854]

yeah why?? im confused

[AcePilot101]

Now this is useful information.

I plan to try it out on my neighbors.

:)

[I8DEAN8I]

lolz

[FIRINMAJLAZOR]

@AcePilot101 then your family gets sued and your parents can go to jail

[leasm5]

lololol

[HybridForces]

nice!

[HollyTheFireNinja]

If you want a gun, get a gun.

If you want rifling in a pneumatic/combustion gun, get a gun.

If you want something that shoots metal, get a gun.

Honestly, in my years in making spud guns, I can promise your life can't depend on a bunch of ABS or steel pipes. It's a hobby making and shooting them guys, don't make it something else. (Or illegal.)

[suzuki834]

i made a combustion gun that shoots .50 cal ball throgh 12 inches of ballistics gel and then it went throgh a wooden fence i dont really know what that has to do with what u said thogh

[HollyTheFireNinja]

I don't get your point, if there is even one. My point was, you can't be spraying hairspray to save your life. Spudding is only a hobby.

[suzuki834]

i know thats y i said i dont know what that had to do with what u said

but uhh my gub would definatly kill some one and it uses gas not hair spray

[jarnail01]

thanks

[utopianvirtuoso]

how do i convert bb rifle and bb pistol into shot gun and pistol?

[merkonerko2]

for the pistol, get a metal cap gun and take the trigger assembly and hammer out of the cap gun, and put it in the BB pistol, then you should probably put some grooves on the inside of the barrel so the bullet curves when leaving the barrel giving it more momentum, it beats me how to make an actual bullet though...

[sludgewig]

drill small hole into sum wood, then melt sum coat hanger or sumin into it when its dried gouge it out

[merkonerko2]

oh ya, i didn't think about making a mold, but where would someone get the powder to go in the shell portion of the cartridge?

[Aresftfun]

it cant be done, because the metal on it isnt strong enough.(unless your nccot talking about airsoft guns, then with bb guns, i dont know if it can be done.)

[subs2all4fun]

Your question makes no sense at all.

[Zato1chi]

idk, how do I convert youtube question and youtube nonsense into remotely understandable and legible?

[cmp6491]

haha good one

[Goobzerz]

Use the Greasemonkey extension in firefox, you can install a script that filters stupid comments, or makes them more legible.

[nightfoxx26]

with tools

[VuurwerkOssOost]

Verrynice man!!

I gona try !

[cody3245678runescape]

dame! that'd be fun XD

[Bran247]

Yes in the article I think they ate up a milk jug with it. I kept the advertisement for several years till I could afford one lol and tried to call them about 15 years ago and no one answered. I held 1500 BB's and looked pretty neat, like a small M-16/grease gun submachine gun.

[LLgangs]

Yeah right!!!

[nickdanger12345]

well since the M16 and the Grease gun are 2 different things entirely, that really isnt possible,

[Bran247]

I remember they used to sell a BB Machine Gun that used a freon can for power. This was back in like 1977. Guns and Ammo did a feature on it and it was advertised in the mag...shot like 1500 BB's. So I bet a Freon can could be hooked up to this also instead of a compressor.

[BettyJuan]

That BB machine gun was called "The Annihilator" and they sold it in all the magazines. In the ad, they showed a street sign full of holes next to the weapon. I always wanted one, but couldn't afford the $45 for it as a teenager back in 1978.

[spinafire]

Does it shoot one at a time or multiple BBs, like an auto-airsoftgun? And would you lose all of your air if you used an airtank?

[BlessxOurxSoldiers]

Just use an air-compressor, it doesn't run out of air since as its used, it draws air from outside the tank.

[spinafire]

I can't get an aircompresser though... That's why I wanted a scheap airtank :*(

[MegaSwordman]

It will shoot out multiple BBs very rapidly. It is, like you described, an auto-airsoftgun.

You can make a small airtank for this, but the problem is it will drain very quickly since this requires a lot of air.

[guitarlord247]

then couldnt you get an empty propane tank and fill it with air and have it mounted on a bipod or something?

[Abrar91]

hey guys...

I'm a bit interested by all these vids...tell me, what basic materials will I need to make something like this, and how much would it cost? Cos there are some good ones out there on the net and I wanna save some money=p

Nice vid btw

Cheers

[MegaSwordman]

Al the materials are described in the video, a majority of them being PVC parts.

The cost can vary whether or not you have the tools, but the basic parts should not exceed $20.

[speedy7722]

How could you fit a vortex block in that?

[MegaSwordman]

This is a different type of BBMG. This one is called a cloud and just uses air.

If you search for Burnt Latke's spudgun site, they have a good tutorial on how to build a BBMG that utilizes a vortex block.

[will01r]

ive added this as favourites

[atomicengineer]

I tryed to make one of these types machine guns, but this design is very bad and the gun is unpredictable and it jams alot. In order to build a good BB machine gun you need to have a regulator inside, that way you can controle how many BB's shoot. My BB machine gun has this and it can fire fully or semiatomatic.

[spudinator2]

yeah all mine use the vortex design this is the cloud design

[sabresfn2661]

can you make a video of it in action and a how-to?

[Rudster816]

you pull the trigger of the air hose and PLLLLTPPPPP goes the BBS

[LaCharminBoon]

The vortex chamber does all the work of pushing lots of bb's out the barrel, but I've only seen guns w/ 125psi. shop air. A more useful version would be self-contained/portable firing .25 ball-bearings @ 500fps or greater, @ least 200rpm.

[zmaxcars]

hey cool video but how do you load it and how does the self loading work please respond thanx

[MegaSwordman]

The threaded endcap in the back unscrews and you pour the BB's in through there and screw the endcap back in place.

The self loading system works by the amount of air flowing through the chamber. All the air rushes out through the barrel and it pushes the BB's along with it.

[reefermadnice]

hello mate,like the machine gun,but i dont know what would power the blowgun,what do you hook it up to? i never heard of a blowgun before

[NamesROverated]

an air compressor