I'm sorry I'm a little slow, but I want to be sure I understand the mod. The stock form of the bike uses only the leaning rider for steering and you made a rod to connect the rider to the forks so that the wheel turns in the opposite direction that the rider leans. With this mod, the motorcycle drives well enough that the crash bars are not needed in order to drive.
You had to install a servo to make the mod, so you also replaced the electronics with your own transmitter/receiver and ESC...that about right? I don't suppose you took pictures as you were working, did you? I would love to see!
請問該如何改電裝?
台灣只有賣一種頻率~
一直苦惱無法跟朋友們一同玩車!
acemaxkimo 2 years ago
必須改裝的部份為: 接收器,電變 和 轉向伺服機servo.
原有的電裝 無法只改變頻率.所以要全換.
otobike 2 years ago
但我整台拆開過!
扣掉Servo裡面所剩的空間已經不多了
還能放入何種電變與接收呢?
能推薦一下嗎!感謝~~
acemaxkimo 2 years ago
how fast is the bike?
thanks for answear
freestyler1914 3 years ago
Not fast, but if you change the stock battery from 4.8V to 6.0V, will be a little fast.
There are two small motors in this bike.
otobike 3 years ago
i got 1 of these for christmas but your much better at steering it than me when i turn it turns to sharp
mattkiwi318 3 years ago
Happy New Year!
otobike 3 years ago
Not sure Irving but I think for a small track the direct steering might be better what you think??
Blacklamass 3 years ago
The leaning rider + direct steering are double effects to make a turn.
We tried this bike at a big space,
It is big enough to run without bars very interesting.
I will try 60cm pin curve MiniZ track next time.
Thank you.
otobike 3 years ago
I'm sorry I'm a little slow, but I want to be sure I understand the mod. The stock form of the bike uses only the leaning rider for steering and you made a rod to connect the rider to the forks so that the wheel turns in the opposite direction that the rider leans. With this mod, the motorcycle drives well enough that the crash bars are not needed in order to drive.
icecreamjason 3 years ago
You had to install a servo to make the mod, so you also replaced the electronics with your own transmitter/receiver and ESC...that about right? I don't suppose you took pictures as you were working, did you? I would love to see!
icecreamjason 3 years ago
I tried several times to reply your question, but didn't work.
We changed the receiver, ESC and servo.
I had some pics at rcgroups motorcycles forum.
otobike 3 years ago
Thanks! I found the site with the details. : )
icecreamjason 3 years ago
Is that box stock motor and batteries with just a steering modification to direct link?
I'm liking that a lot!
Desawa82 3 years ago
Hi,
Yes there still are 2 small stock motors and 4.8V battery.
The part one is the stock bike.
Part II is the moded bike with receiver, ESC and servo.
The direct link rod connected rider and steering forks.
otobike 3 years ago