You are right.. in answering .. "Email" "comments" "Direct YouTube Mail"... I do some times get short.. I don't believe the "BLANK" plates are at that voltage because of the distance from the source.. Keep getting after me I will try better...
Hi John, I've been a fan for a while now and your work is inspiring -- thank you for sharing all your hard work.
Now if I am not mistaking what your blank plates are picking up is what Stan Meyer refers to as "positive/negative voltage potential" in his explanation of the "electrical polarization process". Simply put -- through electrolysis, as the Hydrogen and Oxygen electron bond is canceled-out, electrons are liberated from their shared atomic orbits, hence your mystery voltage.
hi john my name is ray i have been watching your work for a while now and have made my own that I am running on my truck. i just wanted to thank you and tell you keep up the good work.
Hi John, facinating work .....is the reading your getting from the 'blank plates' polarised. Would you get a negative value if you reversed the hook up?
There must be a way to build a series of gen's that power themselves, like using one cell as a power source and the others as gas producers. I'm working on it.
Hi John. I have been playing with a new setup that I'm working on at the moment to go in my new car. I was doing some tests earlier trying to find some way of using the excess heat that the cells produces, and I also thought that there must be a way to recycle the electricity that the cell produces. After about 10 min's of running the cell I switched off and the cell was putting out around 1.5 volts. This was about 5 hours ago and I've just checked after seeing this vid and it's at 0.04 volts.
This is really interesting. Makes me wonder if some of the voltage "used" is recoverable. Also spurs me to try a new configuration utilizing two independent batteries into one cell. Batteries are (1) & (2). Cell plates would be configured (1+)N(2+)N(1-)N(2-)...etc. or something similar. However, I'll have to isolate both batteries via diode(s) so as to prevent "feedback" voltage. That could be dangerous.
You need to keep that gas vented somehow, one spark could take you out ... then who would vindicate Stan. We are all counting on you. Keep pumping blood!! :-)
I think what you are seeing is old. The "Blank" plates are acting like a battery in the electrolyte solution. Great video thou. Always enjoy watching and I would be where I am without your testing and sharing. Wish I knew more about posting video so I could share.
What you are relating to is wrong.. If you watched .... you might notice that there was a load on the "blank plates" and that the voltage went away as soon as the "FOCUS" voltage went away....
Very interesting John. Just curious I noticed that when you had the buzzer hooked up it wasnt drawing any amps however the capacitor plates did lose some voltage also with the LED similar things happend except there was a current draw from the blank plates. Just curious if you have extra voltage across the two blank plates if you were too introduce a diode and connect it back too the power supply if this would help charge a battery? Thanks again John for all your research I think you are on it.
I should never have used that buzzer... it was using current but to little to meter.. The reason for the buzzer was that I didn't think I would get any current from the "blank plates"... let alone enough to power a led.
John, I had the same thing happen this afternoon. I am working with a tube electrolyser and noticed that when the lead was put in the water off to the sid, the unit was producing gas. I picked up a hacksaw blade and connected it to the positive lead on the side of the jar and the cell started producing gas. I think that the current is going through the water and back to the positive plates.
Hi john how di you trick the air sensor in your honda please? Kepp up the great research
ysh25 3 years ago
In my last run.. I did nothing to the o2 sensors.
John AArons
johnaarons 3 years ago
Isn't the electrolyte acting as a conductor? Also, each neutral plate loses voltage the further away from the source, correct?
patro46 3 years ago
You are missing the point..
John AArons
johnaarons 3 years ago
Whew! I'm sure glad you cleared that up for us. Thanks for the vivid explanation. I learned something today...though I'm not sure what it was.
patro46 3 years ago
You are right.. in answering .. "Email" "comments" "Direct YouTube Mail"... I do some times get short.. I don't believe the "BLANK" plates are at that voltage because of the distance from the source.. Keep getting after me I will try better...
John AArons
johnaarons 3 years ago
John, do us all a favor and protect yourself with some ventilation! Last thing we all need is a sick John Aarons... :(
basementexperiments 3 years ago
So what happens if you run 2 power sources in the same cell ? Or stagger the poles so they rapidly change from + to - & - to + ??
wingnut4427 3 years ago
Hi John, I've been a fan for a while now and your work is inspiring -- thank you for sharing all your hard work.
Now if I am not mistaking what your blank plates are picking up is what Stan Meyer refers to as "positive/negative voltage potential" in his explanation of the "electrical polarization process". Simply put -- through electrolysis, as the Hydrogen and Oxygen electron bond is canceled-out, electrons are liberated from their shared atomic orbits, hence your mystery voltage.
Budatrek 3 years ago
I will have to think about that one..
John AArons
johnaarons 3 years ago
hi john my name is ray i have been watching your work for a while now and have made my own that I am running on my truck. i just wanted to thank you and tell you keep up the good work.
thomas76820 3 years ago
Great... enough people do this and the Govern't might just decide to act on something.. I hope we are not too late...
John AArons
johnaarons 3 years ago
Hi John, facinating work .....is the reading your getting from the 'blank plates' polarised. Would you get a negative value if you reversed the hook up?
graffile 3 years ago
That is not stray voltage..
John AArons
johnaarons 3 years ago
There must be a way to build a series of gen's that power themselves, like using one cell as a power source and the others as gas producers. I'm working on it.
babyella07 3 years ago
Hi John. I have been playing with a new setup that I'm working on at the moment to go in my new car. I was doing some tests earlier trying to find some way of using the excess heat that the cells produces, and I also thought that there must be a way to recycle the electricity that the cell produces. After about 10 min's of running the cell I switched off and the cell was putting out around 1.5 volts. This was about 5 hours ago and I've just checked after seeing this vid and it's at 0.04 volts.
babyella07 3 years ago
Keep thinking....
John AArons
johnaarons 3 years ago
I think you should re- look..
John AArons
johnaarons 3 years ago
could you put the the power on the blank plates and have your focus cell with nothing connected and see what happenes to the focus
skylover7 3 years ago
Did that won't work..
John AArons
johnaarons 3 years ago
i would call them electron extraction electrodes...
m3sca1 3 years ago
Hey John,
This is really interesting. Makes me wonder if some of the voltage "used" is recoverable. Also spurs me to try a new configuration utilizing two independent batteries into one cell. Batteries are (1) & (2). Cell plates would be configured (1+)N(2+)N(1-)N(2-)...etc. or something similar. However, I'll have to isolate both batteries via diode(s) so as to prevent "feedback" voltage. That could be dangerous.
-Dave
hoosierinva 3 years ago
Have you ever tried using RF instead of direct current? I was under the impression that's how Stan Meyers did it.
kinnear25 3 years ago
Yes ... didn't work .. for me..
John AArons
johnaarons 3 years ago
have you tried putting a charge on the two end plates.
does this prove that anything in the water is neutral like as i said?
crob227 3 years ago
This proves that there is more to learn... The problem is that this and more is needed to get there... and we are running out of time..
If you want to prove something... Do something.. If you have ideas... get to work..
This is not a put down.. Time is getting sort and if something is not found soon... "LIGHTS OUT" .. JOhn AArons
johnaarons 3 years ago
try adding vacuum to the cell when its in the car ;)
itsallwood 3 years ago
When the cell is in the car ... it is under vacuum.
John AArons
johnaarons 3 years ago
surface skin effect
john102045 3 years ago
You need to keep that gas vented somehow, one spark could take you out ... then who would vindicate Stan. We are all counting on you. Keep pumping blood!! :-)
JukeBoxBear 3 years ago
I think what you are seeing is old. The "Blank" plates are acting like a battery in the electrolyte solution. Great video thou. Always enjoy watching and I would be where I am without your testing and sharing. Wish I knew more about posting video so I could share.
Drew2bBlue 3 years ago
What you are relating to is wrong.. If you watched .... you might notice that there was a load on the "blank plates" and that the voltage went away as soon as the "FOCUS" voltage went away....
John AArons
johnaarons 3 years ago
Very interesting John. Just curious I noticed that when you had the buzzer hooked up it wasnt drawing any amps however the capacitor plates did lose some voltage also with the LED similar things happend except there was a current draw from the blank plates. Just curious if you have extra voltage across the two blank plates if you were too introduce a diode and connect it back too the power supply if this would help charge a battery? Thanks again John for all your research I think you are on it.
asiaollie 3 years ago
I should never have used that buzzer... it was using current but to little to meter.. The reason for the buzzer was that I didn't think I would get any current from the "blank plates"... let alone enough to power a led.
John AArons
johnaarons 3 years ago
John, I had the same thing happen this afternoon. I am working with a tube electrolyser and noticed that when the lead was put in the water off to the sid, the unit was producing gas. I picked up a hacksaw blade and connected it to the positive lead on the side of the jar and the cell started producing gas. I think that the current is going through the water and back to the positive plates.
scibug57 3 years ago
At this point... any one could be right..
John AArons
johnaarons 3 years ago
"I think that the current is going through the water and back to the positive plates."
Concur.
eversincealways 3 years ago
What this proves (to me) is that the voltage is not going from positive to negative.. it is more like a light going in all directions...
John AArons
johnaarons 3 years ago
you should open a window.
bradq 3 years ago 2