hello every one I need help I have xfx 630i mother board my mother board work problem heating Mother board temperature 40 to 45 degree centigrade I know is ok but chipset is heat after close pc I touch my chipset is heat 3 second touch my fingers burn but mother board cooling temperature is 40 to 45 degree centigrade plz evey one help me comment I have core 2 due E6750 xfx gt 240 1 gb and ram 2 gb plz send me moither board ok or fault?
Good luck with RMA ing your board had the same problem with the xfx 750 i motherboard .. it took the xfx support team 4 months to issue an RMA .. and even then they couldnt get it right .... XFX = waste of money
@richardnja you are an idiot. You have never setup your own motherboard or you would know that this is fixed the way it was, in the non- noobs section of the computer, the bios.
im having same problem too except i cant even go into bios(c-mos) it just freeze at the bios splash please someone help me. i have the same exact motherboard
mine does too. but my keyboard dont work at all even a usb and or ps/2 also all the recognizing is very slow. i have a evga 790i ultra sli. i was stupid and didn't sign up for the warranty
I bought this exact same motherboard brand new and it had a defective memory bus (which I cannot repair myself). I sent it in to be replaced and the replacement was also defective (and appeared used). So I sent that in for replacement. When I got the third one in I tested it one time and sold it on eBay. Never buy XFX motherboards. Huge waste of time.
also that CMOS checksum error doesnt look good... many motherboards when dieing shows that message as if there were no cmos battery plugged in the circuit.
i have the same problem, everytime i turn on my pc it says searching NVRAM and nothing happens afterwards, but sometimes it start booting without a problem, but most of the times, the problem occurs.
my pc is brand new with 3gig of RAM, 80HDD, and VISTA ULTIMATE OS...
what do you think the problem is? can you help me guys???
i have the same motherboard combo as that it did not turn on it was the fan was not pluged in the fan slot of the case fan.make shure that the cpu fan and the case fan are pluged in.
QUOTE : gamer2284 (1 month ago) Show Hide 0 Marked as spam Reply | Spam Wow noob or what, if you have a floppy on, but theres not floppy installed, it thinks it disconnected, and wont start, wow, always check your shit, im 16 and i can build them without ever having a problem.
disable floppy drive in the bios and u should have no more problems with that any more and far the f1 key not responding maybe its disable ps/2 connection.
Wow noob or what, if you have a floppy on, but theres not floppy installed, it thinks it disconnected, and wont start, wow, always check your shit, im 16 and i can build them without ever having a problem.
hello every one I need help I have xfx 630i mother board my mother board work problem heating Mother board temperature 40 to 45 degree centigrade I know is ok but chipset is heat after close pc I touch my chipset is heat 3 second touch my fingers burn but mother board cooling temperature is 40 to 45 degree centigrade plz evey one help me comment I have core 2 due E6750 xfx gt 240 1 gb and ram 2 gb plz send me moither board ok or fault?
baber70 8 months ago
clear the bios and update the new one
ratona441 10 months ago
Good luck with RMA ing your board had the same problem with the xfx 750 i motherboard .. it took the xfx support team 4 months to issue an RMA .. and even then they couldnt get it right .... XFX = waste of money
ieatpeas24 1 year ago
RMA THE BOARD!!
richardnja 1 year ago
@richardnja you are an idiot. You have never setup your own motherboard or you would know that this is fixed the way it was, in the non- noobs section of the computer, the bios.
NeekoTheFreeko 1 year ago
im having same problem too except i cant even go into bios(c-mos) it just freeze at the bios splash please someone help me. i have the same exact motherboard
stockton209kid 2 years ago
chek ur hardisk connecter if its well pluged
noomi11 2 years ago
mine does too. but my keyboard dont work at all even a usb and or ps/2 also all the recognizing is very slow. i have a evga 790i ultra sli. i was stupid and didn't sign up for the warranty
ccubsfan94 2 years ago
i have had this board for 2 yrs or so and only had one problem and i fixed that myself i love this board!!!!!!!
AlaskanFlounder 2 years ago
I bought this exact same motherboard brand new and it had a defective memory bus (which I cannot repair myself). I sent it in to be replaced and the replacement was also defective (and appeared used). So I sent that in for replacement. When I got the third one in I tested it one time and sold it on eBay. Never buy XFX motherboards. Huge waste of time.
majesticlizard 2 years ago
also that CMOS checksum error doesnt look good... many motherboards when dieing shows that message as if there were no cmos battery plugged in the circuit.
party4fun 2 years ago
and remember to only use appropriate screwdrivers and take care with electro static.
party4fun 2 years ago
lol there's a spark coming out of one of the memory sticks.... something is wrong.
if i were you i would unmount that case and test only motherboard+cpu+speaker to see if it beeps and no sparks anymore lol
party4fun 2 years ago
thats not a 680i lt sli thats just a normal 680i
cod4source 2 years ago
its an lt.. notice the missing PCIe slot...
worthyofgod1 2 years ago
lol that spark did not look cool
mayers000 2 years ago
lol i know dude got pwned lol or his pc did :)
Prmtyme2 2 years ago
um where do i find the product number on this motherboard? i need to update the bios
photonarbiter 2 years ago
turn off the floppy disk.. and flash the yout bios version. That`s all.
Johnypcd 3 years ago
i have a few questions
1) is this a pci-e x16 2.0 motherboard
2)how many USB ports can you get max out of it
3)does it overclock well
4)does it look nice in your case
thanks
liascm 3 years ago
you proly are using the old wires foir the hard drive which they have a new one for but I really have nbo clue this is just a shot in the dark guess
upplsuckimcool16 3 years ago
i have the same problem, everytime i turn on my pc it says searching NVRAM and nothing happens afterwards, but sometimes it start booting without a problem, but most of the times, the problem occurs.
my pc is brand new with 3gig of RAM, 80HDD, and VISTA ULTIMATE OS...
what do you think the problem is? can you help me guys???
ryebin022 3 years ago
If u have an USB keyboard then u have to enable it frmo BIOS...
I had the same problem but my friend frixed it..
All i know that u have to enable the USB keyboard...
Mine was stucked at the place where u put Windows CD in and it tells you :"press any key to boot from CD" I pressed and nothing happened too...
I hope it helps you..
Henzzzzz15 3 years ago
at least yours starts. mine started restarting every 5 min. a day later it died and i cant get it to do anything
pvgangster 3 years ago
i have the same motherboard combo as that it did not turn on it was the fan was not pluged in the fan slot of the case fan.make shure that the cpu fan and the case fan are pluged in.
colinstienke 3 years ago
theres a spark in your system ram at 0.19 -0.22 wtf!
hustler6t9 3 years ago 13
WOW shit there is lol
pitbike2006 3 years ago
QUOTE : gamer2284 (1 month ago) Show Hide 0 Marked as spam Reply | Spam Wow noob or what, if you have a floppy on, but theres not floppy installed, it thinks it disconnected, and wont start, wow, always check your shit, im 16 and i can build them without ever having a problem.
FUCK YOU.
G33K76 3 years ago
You have to go into the bios and disable the floppy and after that you bedder check your ram.
Then if nothing helped you bedder put out the battary wait 5 minutes and then put it back in!!!
If nothing helped again ,change your mobo !!!
KILLA1915 3 years ago
disable floppy drive in the bios and u should have no more problems with that any more and far the f1 key not responding maybe its disable ps/2 connection.
21boxhead 3 years ago
the message the floppy disk[s] error
CDWalkthroughAG 3 years ago
toss that piece of crap into trash and buy AMD/ATI combination
Bogdan901 3 years ago
How does this come to the Motherboard/Floppy problem?
Fejespatrik 3 years ago
lol i was making and fixing PC's at 11 and im 14.....=-P i out underage you...hehehe...
btw my gaming pc is probly better then u gamer
bogangamer 3 years ago
Wow noob or what, if you have a floppy on, but theres not floppy installed, it thinks it disconnected, and wont start, wow, always check your shit, im 16 and i can build them without ever having a problem.
gamer2284 3 years ago
wow your the biggest ass hole i've seen all day, do all 16 year old's who can slap a computer together and think they're badass act like this???
GET A LIFE, STOP TROLLIN, IT AIN'T THAT HARD!
bookshelffury 3 years ago
if it was disconnected then why would it not be able to boot?.
also, by default. BIOS are set to start off of your hard drive, sometimes your CD drive...Jeeze.
BlackPheonix81 3 years ago
This comment has received too many negative votes show
my rig kills yours
modxo34 3 years ago
XFX rocks
yopperpo2 3 years ago
can u put the XFX 9800 gtx on here
CheenoToCool 3 years ago
i had to do that with mines
GearsTony 3 years ago
i agree wit buzzin92
G33K76 3 years ago
I also agree with buzzin92.
You have the exact same set up as me, I was like WTF?!?!?!
DANDthekid 3 years ago
yeah i agree with buzzin92 disable the floppy in the setup...
FeLLoNeY 3 years ago
set ur floppy drive controller to disable in bios, that should work
buzzin92 3 years ago