How to bypass BMW Passenger Seat Occupancy Mat sensor for passenger Airbag

[lbsnowboarding]

has anyone figured out how to connect this bypass to a three wire. white(data), brown(ground), red(12v)? What does the blue and white wire stand for?

[vehix411]

you need seat emulator

[bbbd01]

@vehix411 where can I find that and what is it

[bbbd01]

I have the brown, red and yellow module...how do I find it and bypass it?

[Sonnybutt789]

Hi mate will that work on bmw 520d m sport it looks like its a common fault on them

[pauloeadie]

Hi Mate, will this method work on an E65 and would I use same size diode / resistors?

[thainosz]

It's serve also to 318TI E36 M44 1997?

[evethang]

Vehix411, my seat does not have a blue/white wire nor a black box. Mine has 3 wires coming from the seat sensor and plugging into another wire which goes to a yellow unit under the seat towards the front. Please help as I do need a bypass for this one. Thank you.

[japemw]

Hello there! I make this connection. Error dissapeared after clearing the error memory. But then I check with INPA livedata from airbagsystem and it tells that nobody sits on the passenger seat. I think that the passenger airbag does not work with this connection.

[VoidRunner100]

Will the same method work for 2004 330xi

[vehix411]

no 100 ohms only

[georgec83]

if i used Resistors 820 Ohm will this work?

[foppe71]

thanks dude the BYPASS WORKS.

I follow your instruction. it cost me 1 EUROS.

i had this error from cARSOFT diagnosis :

24 left sattillite (sensor for sidebag) or presure sensor passenger

16 belt switch, drivers side.

my BMW is: 318 TDS 1998

After reset the AIRBAG light not turn on again

THANKS

[vehix411]

try IN4007 mini diode it should take care of that

[lapingapatodoelmundo]

i have a question... what happens with the seat belt? i will have to click it all times even if is no body seated so i don't have to hear the alarm sound?

[vehix411]

Sometimes it reset automatically sometimes you need the tool to do that

i just did a car last week and it turn off automatically

[calderondean]

someone already asked this quetion but i see no answer so I will try and ask it again. After installing this bypass will it automatically turn the airbag light off or will we need the reset tool to turn it off ?

[BoogityBoogityBoo]

do I need the reset tool to turn off the light after installing the bypass? or will installing actually turn off light?

[vehix411]

this will bypass the pass seat sensor and will tell your airbag module thet someone is sitting their all the time and should activate your passenger airbag in an accident

[sario22152]

what if it activate the air bag??????

[vehix411]

it should make the pass airbag active

[M6BrokeMe]

Will your fix enable the airbag(s) to work correctly?