Exercise Equipment and Treadmill Repair Service

[dhide14]

this is all a scam people

[MsGloww]

i live in queens new york . my treadmill needs a belt and it knocks loud how to fix that?

thanks

[joepolaro]

The deck looks worn

[thugstylef]

my basement flooded and water got into my treadmill it turns on but the belt wont run, please help.

[jtatum1763]

I have a Proform 350, I can set the speed and it will run for 3-5 seconds then it will stop, the panel still works and you can select a speed and it will do the same thing, what is your website, can you help me please?

[MegaAtchy]

I can walk on my treadmill for about 7 or 8 minutes and then the motor/belt just stop. I can restart it by pressing "stop" and then "start" again, but once it happens the first time, it happens every couple of minutes. Is this something I can fix?

[GreekGodUSA]

After watching this video I realize the machine im working on could have one of two issues. When a load is placed on the walking belt, either the drive belt slips on the front roller drive wheel or the walking belt is slipping on the front roller? Is there a way to test which is the problem? Hoping I just have to tighten something somewhere? Thanks.

[ralphas56]

Good video. I lost my manual and this really helps. thanks

[Ostnizdasht206]

My treadmill will work for a couple minutes and then slow down then stop then go again slowly then stop. What could be causing that?

[dboempire]

hey my treadmill turns on fine but then stops running after about a minute of walking or running but if i get off it starts going again

[JDJLIVE1]

need help with my treadmill. keeps shutting off when i turn it on. what is your website. can you help me please

[genus2]

Seem like you have a short of some sort. Contact me at 973-782-4186

[JDJLIVE1]

Having problems with my treadmill. Shuts off as soon as you turn it on. Can you help me please

[NervousNerdReview]

im having problems putting back on my drive belt, its ridiculously hard to get back on i have a 10 year old free spirit i replaced the big belt where you run but the drive belt is the problem now i can't continue until i get that on

[genus2]

Try putting the belt on the motor first...then roll the belt on from the side up onto the front roller flywheel

[NervousNerdReview]

@genus2 thank you! i managed to get it on

one more question please, how do I know I'm adjusting the walking belt too tight?

i read somewhere that I should be able to pull the walking belt upwards in the center 2-3 inches?

[genus2]

@NervousNerdReview You should be able to lift the belt about 3 inches and no more. Another way to know when to stop tightening, is when the slipping stops.

[JDJLIVE1]

GREAT VIDEO! IF MY TREADMILL BREAKS I DON'T KNOW IF I SHOULD CALL YOU OR FIX IT MYSELF. GUESS I SHOULD CALL YOU. HOW DO I KNOW WHICH PART NEEDS FIXING?

[genus2]

Call us. We can get a guy out to fix it for you. Its also pretty hard to tell what part you will need unless you give me more details. If you have a question you can ask us tho. 866-278-3014 if you want to get info.

[genus2]

Its hard to say, especially if its a noise problem

[imurphster]

Hi can anyone help, I have a trimline 2600 treadmill.

The belt is slipping when any weight is put on the belt, I have taken the plastic cover off and narrowed it down to the Treadmill Drive Roller Pulley Wheel.

Can you put me in the right direction as to where i can get on1 please, and are they all standard fit?

Any advise on what to look out for would be great.

THANKS IN ADVANCE

[AfreeQueen]

@imurphster I'm having the same problem with my tredmuill runner.It seems to be warped. Did anyone get back with you about your problem?

[genus2]

You will need to replace the walking belt. Call 866-278-3014 or go to our website for help.

[genus2]

This treadmill is no longer being made and the parts are hard to come by. The roller will need to be repaired. You may be able to get a roller on ebay.

[genus2]

Did you try tightening the belt? You can get support and schedule an appt at 866-278-3014

[Yoursoul101]

Is that what technicians do mostly? Replace the whole motor? Sounds easy enough for a single person to do. I imagine the motor itself already costs a lot by itself so it would suck to be charged a lot for labor.

[genus2]

Techmotion charge $130 flat fee for labor

[dunnyboi64]

you are suppose to flip a deck or replace the deck when replacing the stride belt

[genus2]

If the deck is one that can be flipped, yes.

[shesobreezy]

Good video how do you learn how to fix treadmills?

[shesobreezy]

And lol how do you know whats is broken? thanks

[genus2]

We do have to check your equipment first. Someone do have to look at it.

[genus2]

You need a mechanical and electrical background. Then you can apply to do training with us.

[genus2]

@shesobreezy You can apply for a job with us. We will train you.