Has anybody had any problems with the Twister starting up by itself... full throttle and no control from the radio? If so do you have any ideas or solutions?
@Lexorfly just because you have a cp heli doesn't mean you can fly 3d...I stepped up from coaxials with a walkera UflyS...I couldn't even hover it, and then i bought a Trex450 and a Trex250 and i can now fly circuits with them...3D helis are much easier than FP helis...
I have just started using my Twister 3D and do not understand what I should adjust to make the main rotor spin faster, it seems to spin very slowly and the tail rotor spins out of control, could you tell me what I can change on the settings to rectify the problem
check if you have moved the gyro switch from the stock position to the other one, be sure you have enough pitch to counter the movement, adjust moving the tail servo frwrd or bkward til the tail's close to perfect as posible then adjust with the trim on your TX, always when seting up, get as close as possible to stable mechalically frst (with the servo links) then adjust the trim. if you have any other question related with helis, just pm and i'll be happy to help, there is no stupid question
this is the second twister "3d" video i've seen with no inverted action. Do these choppers actually make it upside down or is this just a marketing tactic?
Has anybody had any problems with the Twister starting up by itself... full throttle and no control from the radio? If so do you have any ideas or solutions?
davidamosphotography 1 year ago
Looking forward to getting this, learned by flying the T CP2, man was that a nervous little bugger ... so now it's time to ramp it up and learn 3D
AtlasRedux 1 year ago
congratulations nice flight, I am learning a fly the same way and I am succeeding almost
MISTERBLADE56 1 year ago
what does it mean by 3d?cos its 3d you cant have a 2d heli flying!...can you?
cartoontom9 1 year ago
why have a 3D heli and not fly 3D ?..
Lexorfly 1 year ago
@Lexorfly I do but only on the Sim, It's far cheaper in the long run, and anyway I am no young topgun anymore!
mhoyle0121 1 year ago
@Lexorfly just because you have a cp heli doesn't mean you can fly 3d...I stepped up from coaxials with a walkera UflyS...I couldn't even hover it, and then i bought a Trex450 and a Trex250 and i can now fly circuits with them...3D helis are much easier than FP helis...
dukeofdream 5 months ago
any 1 know what Body Shell that is?
kingphil19 2 years ago
I have just started using my Twister 3D and do not understand what I should adjust to make the main rotor spin faster, it seems to spin very slowly and the tail rotor spins out of control, could you tell me what I can change on the settings to rectify the problem
gecube88 3 years ago
check if you have moved the gyro switch from the stock position to the other one, be sure you have enough pitch to counter the movement, adjust moving the tail servo frwrd or bkward til the tail's close to perfect as posible then adjust with the trim on your TX, always when seting up, get as close as possible to stable mechalically frst (with the servo links) then adjust the trim. if you have any other question related with helis, just pm and i'll be happy to help, there is no stupid question
luisg877 3 years ago
For your normal flight mode, what pitch curve settings are you using?
tpodi 3 years ago
this is the second twister "3d" video i've seen with no inverted action. Do these choppers actually make it upside down or is this just a marketing tactic?
Keithwoodhall 3 years ago
This is a 450 class heli.....no?
girrocks12345 3 years ago
yes
knifeedge63 3 years ago
What transmitter are you using on your Twister?
tpodi 3 years ago
Also how are your flight times?
chrisbofh 4 years ago
How much practice have you had?
I'm learning on a simulator and about to buy my Twister.
chrisbofh 4 years ago
cool
mryandao54 4 years ago