Paper Gun Mechanism tutorial part 2/2

[PaperGlock17]

can u make a tutorial on how to make the whole colt

[terrance800]

greeat vid for my gun jus 1 question, how do i make it look like a gun :P

[MultiCpfan101]

u should've made fake bullets u know

[MultiCpfan101]

this really helped i scared my brother with a fake gun lol it was so funnyyyyyy

[minecrafterswagg]

the end song sounds like an african chant i like it : )

[M0nst3r022]

bbooooooo!!!!



[MetaOutCastHD]

10 people got paper cuts (:

[MultiBoy109]

is this a shoot mechanism

[MrCatalinh]

THIS WAS THE SINGLE TUT THAT RLY WORKED FOR ME!!! THE MECHANISM REALLY WORKS!!!! THANKS DUDE!!!

[MasteryMan836]

dude very nice but have u thought to do a hole pistol tutorial and not part of him

[HunterDragonflame]

ok now i have the sliding mechanism wheres the rest?

[jordanmiller99999999]

hey sweet tutorial but how would u make the cover for it to go on the pistol

[ChrisMusicPage]

who made the song flower it's been three days and i can't find it

[charzard1404]

great imma use that naoo! what was the song at the end?

[alienbrett]

I didn't understand it, and you said you would show us how to make a gun, not a mechanism. Thanks for wasting 12 minutes.

[0003darkangel]

i don get it make a better one

[0003darkangel]

i don t get it

[Deviljin296]

can u make a video on how to make paper guns that are fully functional :)

make a usp .45 and make it so when i slide and let go, it goes back to its original position :) but unless you cant do that then its okay. (Try pen springs cuz i got a ton)

[megafallenangle]

lol you are finish

[TheMrNiclas]

thx

[citizentray]

you kinda lost me

[TheAncientPaper]

@citizentray sorry dude, i had strep throat when i made his tutorial so i didn't want to talk. and i didn't expect this tutorial to be perfect. I was hoping that everyone would watch the actual process instead of my confusing text tutorial XD

[citizentray]

@TheAncientPaper its ok i got it now thanks anyway

[foolzfool]

Thanks for the tutorial! I am waiting for the next video of the completion...

[ichigo9995303]

TIP:ROLE UR PAPER OVER A PENCIL FOR A SMALL TUBE.:)

[Jay21Nov]

now how 2 attach to handle

[SuperDamon12]

man i thought you was going to show how you did the outside of the gun too.

[PAPERofROCK]

is this excacally how you make it on your colt because i cant put things together you know what i mean?

[PAPERofROCK]

do you think crystal clear tape is good?? because i use it, and i hate ruban invisible cause its weak and not realy invisible

[YaginBori]

2nd part to cunfuzing

[PandaBearBling]

wow. lots of tubes...

[TheAncientPaper]

@PandaBearBling is it? ;p lol

[Thatwascool221]

Haha for your thumbs up I give you a thumbs up

[TheAncientPaper]

i suck at explaining things. sorry the text is confusing! hopefully the actual work-through was helpful :P

[minatovssouji]

@TheAncientPaper how do you tape the bottom thing wear the handle goes on?Answer please

[NammyBoys]

hey cool video! you should do a video on how to use a trigger system on a gun because i don't know how to do that lol. Anyways great video 5/5 thumbs up. keep up the good work! =D

[ngameros2000]

thnx alot i love your videos

[Bossness123]

UR THE BIGGEST CUNT IVE EVER SEEN U FUKER

[insane0p0tat0]

pretty good!...the only thing i would say is to either back the camera up or make sure you keep your hands in the frame

[TheAncientPaper]

@insane0p0tat0 at that time, i didn't have a tripod of my camera :S i had it stacked on shoe boxes and the dock that came with it. BUT i have one now so the camera will be sitting farther :)

[NammyBoys]

@TheAncientPaper hey cool video! you should do a video on how to use a trigger system on a gun because i don't know how to do that lol. Anyways great video 5/5 thumbs up. keep up the good work! =D

[2good2be4gotten100]

hey guys just give hi a break. he tried to help you retards.

i know it would have been much better if he made a tutorial on how to make a paper colt 1911. plz make a tut.

[2good2be4gotten100]

hey guys just give hi a break. he tried to help you retards.

i know it would have been much better if he made a tutorial on how to make a paper colt 1911. plz make a tut.

[jor3122]

SSSAAAHWHEEEAT. i don't see what the big problem is for these people, make the gun as you go along, right?

[DeuxsGotsMethos]

I followed every step even your mistakes i followed but i was succesful in making the Gun Mechanism. I owe you a Subscription.

[empoleon002]

omg. I can't understand! this is so confusing ....

[wujcio4]

wow 5/5

[mact39]

lol

[aynakuuu]

how to make a bullet and i was thinking?pls ans.......

[mrbasketballguy3]

that sucked i wanted to know how to make the whole gun...and why don't you just talk because the writing made it more confusing...

[TheAncientPaper]

@mrbasketballguy3 i'm terrible at speaking. no i'm not some little 5 year old kid before you ask about that :p Plus when I made this video, i had a sore throat.

[rabbitfish2222]

dude ur fuking awesome 5/5 : ) fuking gret jobb man : ) :)

[2videomaker]

ur a dumbass, we wanted to see how it shoots not a fuckin gay slide rail

[TheAncientPaper]

really..? did you ever once think of the whole point of the video was about? if you want to see how a blowgun works, go wiki the tutorial on a BLOWGUN. anyways, without this tutorial, you could not make it shoot correctly so be more courteous or i will block you.

[high01ranked01playa]

@2videomaker NOT WE YOU

[UnusualDilemna]

Mechanism? MECHANISM!?!?!? That's just the barrel!! I wanted to know how to make it SHOOT.

[TheAncientPaper]

@UnusualDilemna oh save me the trouble and learn how a paper gun works before bantering me about this..

[vietor33]

THANK YOU

[gman248]

i didnt see the end around 6:37 i think.

you covered the whole slide with hand :/

[reebokgoalie88]

dude plz make vid or tell me how to make a gun with this slide in it plz????

[TheBadBoy1005]

thanks so much dude

[coolsoundsfunlike]

i dont get it.... Where do we start from

[TheAncientPaper]

@coolsoundsfunlike

try starting from part 1

[rares508]

Yea aerosmith760 suck!!!

he even cant make a gun!

ANCIENT PAPER u R The first 1 on youtube!

[tyraniking]

tytytytyty thank you so much i made one with your instructions see the video above again ty so much!

[xxnrod13xx]

due i like ur vid wit da colt when u test it and crap tht waz lik amazizizing. i paused it and made one my self and made the blow tube and crap and it came out pretty good thanks 5/5 plus i subscried u

[TheAncientPaper]

@xxnrod13xx

Thanks dude!

[GriManiac]

man fuck you your bitch ass go fuck your mom with a strap on dick

[sesam140]

6:35 what slide??

[TheAncientPaper]

@sesam140 if you see the piece i wrapped around both barrels, thats where you tape

[33cc22bb11aa]

ok dude no offense bu ur hole barrel making stuff was confusing!

make a revised making it easier to do

[TheAncientPaper]

@33cc22bb11aa sorry about that :\

[Forrasy]

yo i finished all of this but can u make instructions for the outer look?

[TheAncientPaper]

no, sorry. the outer look is up to you.

[Forrasy]

aha ok well i kinda made an outer look but i need to make it more sturdy and thicker.

[AznProPain]

ur tut kinda confuses me

[TheAncientPaper]

i thought it would slightly, this is my first tutorial so i wasn't expecting it to be perfect.

[BenderBitch]

whats the transformingfreaks prob yo

[Jacoustiic]

hey..

how did you make the handle/grip? =S

[TheAncientPaper]

....?

[ravi930]

can you post a tutorial on how to design and all that stuff

[CROSSFIRE145]

yeh i know wtf ???????????????

[DontClickOurURL]

ok, before i loose my mind and explode, the handle is not called a handle, it is a grip, if you disagree, i will give you all the links that prove i am right

[TheAncientPaper]

and this goes to..

[DontClickOurURL]

it goes to all the idiots who call it a handle! it isnt a handle! it is a grip

[jb649]

i remember this song

[claudem82]

i done exactly what you did but when i pull back the slide the fucking slide comes out all the way

[TheAncientPaper]

you did something wrong. cause what i did in the video, thats ALL that i did to it, and my slide doesn't slide out all the way

[TheAncientPaper]

i think you might be missing 5:52 where i put the slide cover

[NoScopingKing01]

can u put up how to make the grips and clif ant slide

[claudem82]

maybe a fucking tutorial for the rest of the gun would be FUCKING nice

[TheAncientPaper]

their are other ways to ask for a tutorial, and you pick the only one that only an 8 year old has to say, "FUCKING." here's my "8" year old response "Go fuck yourself" i said in my channel that i only make tutorials for my mechanisms, not the full thing, i don't have a lot of time to make the video, manipulate on iMovie and send to youtube.

[7145159]

pls make a part 3

on the handle,clip,details,rest of the gun

[DontClickOurURL]

i dont think the rest needs a tutorial. the grip is very easy to make as well as the magazine.

[rossckajjen]

...and would you be able to make a tutoral on how to do the rest of the gun like the trigger, handle, clip, etc, etc. thanks =]

[I3UDDYLOVE]

you rock dude, do you think you can make a mechanism tutorial for your other gun? i subscribed and rated all your vids 5/5.

[ink13jr]

do u thing u could make a tutorial plz dude it would be awsome

[TheAncientPaper]

uh..? look @ the video?

[Letsgo2Tescos]

r u blind this is a tut

[ink13jr]

no i ment for the whole gun dumbass no shit this is a tut

[TheAncientPaper]

y did you not say "whole gun" then it would have been easier to understand you if you did : ]

[Letsgo2Tescos]

that would be awesome

[astropop2]

um maybe just skin it over???

[rossckajjen]

roflmao!!! are you stupid or something man???

[TheAncientPaper]

may i ask to whom that comment goes to? lol

[rossckajjen]

lol sorry it went to ink13jr =/ 5/5 m8 =]

[darkpikmin2964]

Awesome! I made the whole gun and it realistically functions! Perfect!

[DracoTommy]

dude did you make the mag?

[TheAncientPaper]

yes i made the clip.

[insanegunfreak]

Thx so much! bcuz of u i was able to solve the pistol mechanism mistery!!!

[Papergman999]

thanks i mean great video

[matthewsolo101]

is part 3 coming out

[TheAncientPaper]

did you not watch the video

[PaperGTutorials]

how do u make the rest of the gun

[TheAncientPaper]

i said i will only make the tuts for the mechanisms, the rest is for you to find out. i want the community to realize that they should find their style, not take it from someone else. i made my PG's from my own perspective.

[johncenamaniac100]

just tape a rail to the part the DOESNT slide and your all set

[papergunnerboi]

very well thought