Apparently you don't know about the hydrogen rotary engine, rotary engines respond better to it than piston engines. Also 2 rotor engines weigh about 100 lbs. less than a standard v6 engines. Not saying i'm for or against any kind of engine. If it makes a lot of power i'm good.
They are reliable, they do wear out faster than most piston engines but they do so at a reliable rate and with proper care can last just as long without any problems related to having a valvetrain, burning oil isn't a problem, yes they do get heavier the bigger you build them like anything else, once Mazda makes non cast iron housings that are strong enough they will be much lighter, fuel economy isn't that bad, and emissions aren't that important honestly.
You are an idiot, Burning oil is a problem. Only the obsolete 2 cycle engine does that along with the rotary. The rotary is outdated and obsolete also. It probably won't be around much longer and all of your idiotic drivel will end. Mazda non-cast iron housings are for race only if you can find them and the aftermarket aluminum are the same and DO wear faster, If you are going to talk about the junk rotary at least know what you are talking about moron.
Mazda is developing a 1.6L aluminum housing for their street cars, yeah aluminum ears faster than iron, burning oil isn't /that much/ of a problem, and you don't have to insult me. =/
LOL..and his engine is fine. You are an idiot using logic like that. Rotary powered cars usually break down due to engine issues. The rotary is garbage. Mine was on it's second engine when I bought it. They are junk.
just using your logic dipshit haha I drove to the store today in my rx7, it didn't break down, you probably just pissed in the gas tank and tried to drive home on it.
WRONG. That is your distorted view. The rotary will run on for quite some time. However they have poor life to them usually ruining far earlier than their piston counterparts. My Rx7 has 140K and was on its second engine.
huh, in one of the other hundreds of rotary threads you fuck around in you stated you put an ls1 in your rx7 then sold it. Oh well you're just a lying douche I'm running a 7 well over 200k original everything zero problems, admit it, your daddy raped you in a 7 didn't he?
You are an idiot and can't even get anything right, and you expect those that read your posts to give you any credibility whatsoever.
I NEVER stated that I sold my car. You made it up just like you made up how many miles you have on your car and that it is still in perfect condition. You are a lying sack of shit. Nothing more, nothing less.
Is there an echo in here? You're lying No you're lying NO you're lying! haha you've commented so fucking much on every rotary video on youtube every rotary fan here fucking hates you, You sir have no credibility, so until I see your v8 fd I'll keep mocking your dumb ass. and why would I make up shit about my cars? they actually exist, as in I can take pictures!
Yeah there is an echo in here..it is in your empty head. I do not have an Fd. I have an Fc. You would make shit up about your cars as you are an idiot rotard. So far from what I have seen on here, the most ignorant people out of all the automobile enthusiasts. That is why.
your the only douche on here clogging the rotary video's with your god awful spam. If it was possible to search through every piece of trash you've written on here I'd find out right where you talked about your dad's fd and the ls1 in it along with the ls1 in your fc and about how you like to take it in the butt while getting jizzed on in the face
LOL At my foot up your ass, man are you seriously like 7 or what? take the dick out of your ass and realize that there is something else out there that works besides your fossil engine-
besides my car runs, even if it didn't at least it exists- LOL at that bitch
You are a complete idiot at calling piston engines as fossil engines. From what I see the rotary and the 2 cycle engines are the ones that are endangered as they haven't changed enough to suit the industry. You better go back to school moron.
from what I see the reference to fossil is the engine being older? are you denying the piston engine is not older? didn't think so fuck ass, you are the one who needs to go back to school if you think fossil and endangered are the same word.
LOL..The piston has been around longer and will outlast the junk rotary. Only a moron like you will hang on to a poor powerplant like that. I call the rotary a fossil as it hasn't really evolved because the original issues with the engine are still there. Burns excessive amounts of oil, low torque, uses fuel like an engine 4times its size, very dirty in emissions, finicky, and unreliable. The automobile industry has spoken. You are a moron to not accept that.
low torque? dirty? finicky? unreliable? WRONG! the torque is roughly equal to the horse power- low torque compared to a diesel maybe- rotary's have passed calli emissions for years just takes a cat just like a diesel- they are reliable and if maintained will last just like any other engine- you repeat the same shit over and over and over everyone hates you I hate you you have no valid points shut the fuck up! that gets an LOL
You are a liar and an idiot. The torque is NOT equal to the h,p. Look at the 2009 Rx8. They are NOT reliable as many have ditched the junk rotary for a piston engine. Others that are too stupid to get rid of the junk powerplant are still complaining on Rx- websites about having to rebuild their engine. THEY are NOT just like any other powerplant. I have valid points. All you have is lies.
what the fuck are you talking about? 212hp/180ft/lbs of torque is pretty even- but forget the rx8 the renesis is junk i am only talking about peripheral exhaust the FB 12a was 100hp 95ft/lb and FB 13b was 135hp/135ft/lbs- FC had 146hp/135ft/lbs s4 NA- it went just like this- there is a point where it plains off on torque around 300hp but we are talking street here- now that is a valid point, besides on rx7club or any of the other forums I use NO ONE ever complains about rebuilds cause its easy!
2nd: How could the renesis be junk if it offers more hp than any other N/A rotary. According to Mazda the renesis was their acheivement over older rotary designs. I think I will believe Mazda over some idiot poster on youtube.
3rd: You are full of shit if you don't see anyone complaining about rebuilds on rx7 club. Rebuilds may be easy but it is a pain to have to do it in the first place.
dude, 99.9999999% of all rebuilds people talk about on rx7 club are done to port their engines, not because something failed! 20 bucks says its a hell of a lot easier to rebuild and port a rotary for me than it is for you to pull your head reseat the valves and port them on your neon, and lets see your shitty engine increase 100hp simply by cutting away some metal with a dermal
Wrong moron. You don't complain about adding performance to your engine. You do however complain about having to rebuild over and over again trying to chase down piston engines. LOL..you are too funny.
@aji8 you have a better chance of failure with 40+ moving parts in a normal piston engine... more moving parts= more chance of failure simple fact.. they get swapped cuz they are expensive to build... and this comin from a guy who ownes a 355 small block chevy........
From the window of an 06 at the dealership where I work! where the hell did you get 159?
but besides you didn't listen to me when I said the renisis is fucking JUNK!!!! they increased port length to decrease over lap to increase fuel efficency- longer burn higher power they didn't realize the other problems that causes- besides that I proved you wrong! basicaly every other rotary has equal torque mazda got the engine right 30 damn years ago my gsl-se gets 135hp/135ft/lbs 26city/30hyw!
You are a liar. I told you where the 159 came from and until you actually come up with a viable source, you are a liar just like all the other idiot rotards. You are a liar about your gsl too. Go figure.
dude dont listen to that douchebag.. he's been all over rotary vids talking shit he cant back up.. hes a 36 year old virgin most likely since no guy is gay enough to fuck him in the ass..
please english
murat70tr 1 year ago
please english
murat70tr 1 year ago
AMAZING, If "Felix Wankel" could see that.....
ChrisLuxembourg 1 year ago
WARNING!!...........This video carries an infection...........its called the aji8 bullshit bug.....careful now.....its contagious!!!
Wankellover 1 year ago
12a's made 100 hp on 70ci if it had 350ci like some small block piston engines we all know it would have 500 n/a what is there not to like?
whitelightnin13 2 years ago
very good engine and design !!! but crappy fuel economy
JuanPapaNicolao 2 years ago
Стоящее))
MultiPatriote 2 years ago
Apparently you don't know about the hydrogen rotary engine, rotary engines respond better to it than piston engines. Also 2 rotor engines weigh about 100 lbs. less than a standard v6 engines. Not saying i'm for or against any kind of engine. If it makes a lot of power i'm good.
ragnaroker85 2 years ago
Rotary engine is garbage. Why would you patent that?
aji8 2 years ago
you know nothing...
vdub2002 2 years ago 4
More than you obviously.
aji8 2 years ago
and you do o_0
vdub2002 2 years ago
Yes I do!
aji8 2 years ago
Please explain why the rotary is garbage.. if you must cast your opion , give a reason
bdbl0 2 years ago
I have many times. Unreliable, burns oil like a 2 cycle, gets heavy when start making more than a 2 rotor, terrible fuel economy, high emissions.
aji8 2 years ago
They are reliable, they do wear out faster than most piston engines but they do so at a reliable rate and with proper care can last just as long without any problems related to having a valvetrain, burning oil isn't a problem, yes they do get heavier the bigger you build them like anything else, once Mazda makes non cast iron housings that are strong enough they will be much lighter, fuel economy isn't that bad, and emissions aren't that important honestly.
TKDWolf 2 years ago
You are an idiot, Burning oil is a problem. Only the obsolete 2 cycle engine does that along with the rotary. The rotary is outdated and obsolete also. It probably won't be around much longer and all of your idiotic drivel will end. Mazda non-cast iron housings are for race only if you can find them and the aftermarket aluminum are the same and DO wear faster, If you are going to talk about the junk rotary at least know what you are talking about moron.
aji8 2 years ago
Mazda is developing a 1.6L aluminum housing for their street cars, yeah aluminum ears faster than iron, burning oil isn't /that much/ of a problem, and you don't have to insult me. =/
TKDWolf 2 years ago
I will believe it when I see it rotard. LOL..Mazda should get smart and invest their money in something else. I think the rotary will be gone soon.
aji8 2 years ago
you would be against 2 stroke too. Rotaries are better than pistons but when it comes to piston engines the two stroke destroys 4 stroke
13brotary 2 years ago
Rotarys are junk. Pistons are more reliable.
aji8 2 years ago
Pistons are junk. Rotaries are more reliable end of story. just today my friends truck broke down, powered by pistons, that means they all suck.
13brotary 2 years ago
LOL..and his engine is fine. You are an idiot using logic like that. Rotary powered cars usually break down due to engine issues. The rotary is garbage. Mine was on it's second engine when I bought it. They are junk.
aji8 2 years ago
just using your logic dipshit haha I drove to the store today in my rx7, it didn't break down, you probably just pissed in the gas tank and tried to drive home on it.
13brotary 2 years ago
WRONG. That is your distorted view. The rotary will run on for quite some time. However they have poor life to them usually ruining far earlier than their piston counterparts. My Rx7 has 140K and was on its second engine.
aji8 2 years ago
huh, in one of the other hundreds of rotary threads you fuck around in you stated you put an ls1 in your rx7 then sold it. Oh well you're just a lying douche I'm running a 7 well over 200k original everything zero problems, admit it, your daddy raped you in a 7 didn't he?
13brotary 2 years ago
You are an idiot and can't even get anything right, and you expect those that read your posts to give you any credibility whatsoever.
I NEVER stated that I sold my car. You made it up just like you made up how many miles you have on your car and that it is still in perfect condition. You are a lying sack of shit. Nothing more, nothing less.
aji8 2 years ago
Is there an echo in here? You're lying No you're lying NO you're lying! haha you've commented so fucking much on every rotary video on youtube every rotary fan here fucking hates you, You sir have no credibility, so until I see your v8 fd I'll keep mocking your dumb ass. and why would I make up shit about my cars? they actually exist, as in I can take pictures!
13brotary 2 years ago
Yeah there is an echo in here..it is in your empty head. I do not have an Fd. I have an Fc. You would make shit up about your cars as you are an idiot rotard. So far from what I have seen on here, the most ignorant people out of all the automobile enthusiasts. That is why.
aji8 2 years ago
your the only douche on here clogging the rotary video's with your god awful spam. If it was possible to search through every piece of trash you've written on here I'd find out right where you talked about your dad's fd and the ls1 in it along with the ls1 in your fc and about how you like to take it in the butt while getting jizzed on in the face
13brotary 2 years ago
Sorry you can't handle the truth. Get a clue moron.
aji8 2 years ago
how about we race then, your v8 rx7 vs my real rx7 that will probably give you a clue
13brotary 2 years ago
Your car probably doesn't even run. If it does it is unreliable. Racing should be the last thing on your mind...LOL
aji8 2 years ago
LOL At my foot up your ass, man are you seriously like 7 or what? take the dick out of your ass and realize that there is something else out there that works besides your fossil engine-
besides my car runs, even if it didn't at least it exists- LOL at that bitch
13brotary 2 years ago
You are a complete idiot at calling piston engines as fossil engines. From what I see the rotary and the 2 cycle engines are the ones that are endangered as they haven't changed enough to suit the industry. You better go back to school moron.
aji8 2 years ago
from what I see the reference to fossil is the engine being older? are you denying the piston engine is not older? didn't think so fuck ass, you are the one who needs to go back to school if you think fossil and endangered are the same word.
13brotary 2 years ago
LOL..The piston has been around longer and will outlast the junk rotary. Only a moron like you will hang on to a poor powerplant like that. I call the rotary a fossil as it hasn't really evolved because the original issues with the engine are still there. Burns excessive amounts of oil, low torque, uses fuel like an engine 4times its size, very dirty in emissions, finicky, and unreliable. The automobile industry has spoken. You are a moron to not accept that.
aji8 2 years ago
low torque? dirty? finicky? unreliable? WRONG! the torque is roughly equal to the horse power- low torque compared to a diesel maybe- rotary's have passed calli emissions for years just takes a cat just like a diesel- they are reliable and if maintained will last just like any other engine- you repeat the same shit over and over and over everyone hates you I hate you you have no valid points shut the fuck up! that gets an LOL
13brotary 2 years ago
You are a liar and an idiot. The torque is NOT equal to the h,p. Look at the 2009 Rx8. They are NOT reliable as many have ditched the junk rotary for a piston engine. Others that are too stupid to get rid of the junk powerplant are still complaining on Rx- websites about having to rebuild their engine. THEY are NOT just like any other powerplant. I have valid points. All you have is lies.
aji8 2 years ago
what the fuck are you talking about? 212hp/180ft/lbs of torque is pretty even- but forget the rx8 the renesis is junk i am only talking about peripheral exhaust the FB 12a was 100hp 95ft/lb and FB 13b was 135hp/135ft/lbs- FC had 146hp/135ft/lbs s4 NA- it went just like this- there is a point where it plains off on torque around 300hp but we are talking street here- now that is a valid point, besides on rx7club or any of the other forums I use NO ONE ever complains about rebuilds cause its easy!
13brotary 2 years ago
First off idiot, where do you get 180 ft/lbs?
Edmunds lists the 2009 Rx8 at 159 ft/lbs.
2nd: How could the renesis be junk if it offers more hp than any other N/A rotary. According to Mazda the renesis was their acheivement over older rotary designs. I think I will believe Mazda over some idiot poster on youtube.
3rd: You are full of shit if you don't see anyone complaining about rebuilds on rx7 club. Rebuilds may be easy but it is a pain to have to do it in the first place.
aji8 2 years ago
My piston engine does not require all these rebuilds!
aji8 2 years ago
dude, 99.9999999% of all rebuilds people talk about on rx7 club are done to port their engines, not because something failed! 20 bucks says its a hell of a lot easier to rebuild and port a rotary for me than it is for you to pull your head reseat the valves and port them on your neon, and lets see your shitty engine increase 100hp simply by cutting away some metal with a dermal
13brotary 2 years ago
Wrong moron. You don't complain about adding performance to your engine. You do however complain about having to rebuild over and over again trying to chase down piston engines. LOL..you are too funny.
aji8 2 years ago
NO ONE I have ever met on the club bitches about rebuilds only dumb ass you tube trollers like your bitch ass who has never done it
13brotary 2 years ago
Yeah everybody loves the rotary. That is why it gets swapped out so much.
LOL moron.
aji8 2 years ago
@aji8 you have a better chance of failure with 40+ moving parts in a normal piston engine... more moving parts= more chance of failure simple fact.. they get swapped cuz they are expensive to build... and this comin from a guy who ownes a 355 small block chevy........
phxkid 1 year ago
From the window of an 06 at the dealership where I work! where the hell did you get 159?
but besides you didn't listen to me when I said the renisis is fucking JUNK!!!! they increased port length to decrease over lap to increase fuel efficency- longer burn higher power they didn't realize the other problems that causes- besides that I proved you wrong! basicaly every other rotary has equal torque mazda got the engine right 30 damn years ago my gsl-se gets 135hp/135ft/lbs 26city/30hyw!
13brotary 2 years ago
You are a liar. I told you where the 159 came from and until you actually come up with a viable source, you are a liar just like all the other idiot rotards. You are a liar about your gsl too. Go figure.
aji8 2 years ago
once again you didn't reply to anything I said with anything but a bunch of shit, go drink comet and die fag
13brotary 2 years ago
@aji8 they are 2 cycle (2 stroke)
DeadlySausage 2 years ago
dude dont listen to that douchebag.. he's been all over rotary vids talking shit he cant back up.. hes a 36 year old virgin most likely since no guy is gay enough to fuck him in the ass..
cfezuwm 2 years ago
pretty sure he still get's fucked by his dad every night
13brotary 2 years ago
My version of a true rotary engine, Patented.
TommeyLeeReed 3 years ago
great vid but i dont understand japanese
superdude361 4 years ago 5
Loaok at my version, This is a true rotary engine.
TommeyLeeReed 3 years ago