Works great but the "Plug left aileron into aux1." threw me off. I plugged left wing into aux 1 and only the left worked. I then plugged right aileron into aux1 and it worked, maybe you meant "left wing if you are looking at it while its upside down"? :) Anyway, thanks much for posting this video it helped a ton.
The setup for Radian Pro/ DX6i that is recommended through Horizon Hobby works unless your plane came as a BNF with a "Y" harness in the Aileron port of the RX. If it did... then just remove the harness and plug the right wing aileron straight into the aux. port and left wing aileron into the aileron port of your receiver. Then Flaps and Crow will work properly.
I gues its posible but would have to loose crow brakes or aileron rudder mix, reflex would nice too, really need a better radio to do gliders properly, I have dx6i, and am looking at getting dx8 but really dont need all the mixes unless yr doing competion flying so will just stick to my dx6i for now.
What do you have to do - "Y" the flap servo's together and use the gear switch to activate them, then use the flap swich programmed "UP" instead of down to get the ailerons in the up position for CROW?
Comment removed
Nicopolis151 9 months ago
Works great but the "Plug left aileron into aux1." threw me off. I plugged left wing into aux 1 and only the left worked. I then plugged right aileron into aux1 and it worked, maybe you meant "left wing if you are looking at it while its upside down"? :) Anyway, thanks much for posting this video it helped a ton.
MyJt7 10 months ago
This has been flagged as spam show
The setup for Radian Pro/ DX6i that is recommended through Horizon Hobby works unless your plane came as a BNF with a "Y" harness in the Aileron port of the RX. If it did... then just remove the harness and plug the right wing aileron straight into the aux. port and left wing aileron into the aileron port of your receiver. Then Flaps and Crow will work properly.
Nicopolis151 9 months ago
Thank you for posting this. I had the same issues with the setup guide. I finally have crow on my Radian Pro.
corndawg56 10 months ago
@corndawg56 me too this sorted out flaps & crow on my dx6i nicely
RxRobbo 10 months ago
what about camber, thats what I would really want
I gues its posible but would have to loose crow brakes or aileron rudder mix, reflex would nice too, really need a better radio to do gliders properly, I have dx6i, and am looking at getting dx8 but really dont need all the mixes unless yr doing competion flying so will just stick to my dx6i for now.
nigeltelevet 1 year ago
What do you have to do - "Y" the flap servo's together and use the gear switch to activate them, then use the flap swich programmed "UP" instead of down to get the ailerons in the up position for CROW?
sbs9026 1 year ago
can you still use your ailerons individually or once you flick the switch are they in a fixed position?
lildude52ca 1 year ago
@lildude52ca yes,you can use the ailerons
only the flaps will stay in a fixed position
melas 1 year ago
that frusterates me, i was talked out of a sale on a dx6i on this same glider because i was told you couldnt do this.
lildude52ca 1 year ago
well now you have to flick one to many for a landing but overall well done making a 6 to an 8 channnal.
shockflyyer3d 1 year ago