30 LPM!! 118 plate Monster Hydrogen cell Back from the dead part5

[jamesfk77]

Now you just gotta hook that thing up to your car. Yeah Buddy!

[61miroman]

Thank you for the advice it was a question other migh get also. Thanks for you response and keep up the videos. Wery cool stuff. You must take the heat out of the compression first before you can liquify the hydrgen.

[delvis11]

@61miroman pure Hydrogen is safe to compress. It wont burn without oxygen. Thats why HHO isn't safe to compress. It's a perfect oxy/hydrogen mix for an explosion and it can ignite itself under pressure. People have been killed compressing HHO. Please be safe people. :)

[themabdaguy]

@delvis11 how do i get pure hydrogen

[61miroman]

Absolutely briliant video thank you for the solution to the warming monster. Can HHO be compressed in a airless compressor? What's the flash point of HHO should be the question.

[delvis11]

@61miroman NEVER compress HHO unless you want to die. Very unstable.

[mike29571]

Jaw dropping. You are the man. Just don't blow yourself up, ok?

[hotpapayasalad]

i call that hydrogen heaven!!!

[Jupiterironman]

Bravo, well done totally awesome!!!!!!

[fcdcristy92]

LIGHT IT UUUUUUUUUUUUUUUUUUUUUUPPPPPPPP­PP!!!!!!!!!!!!!

[netuser26]

so if u could tell me how much a/c v/watts/amps that would be awsom your numbers are only on the cell but the caps and rectifires use power to so it would be nice to see the total power used in a/c. i might be maken vids on my cells so i can show u what im doing just a little diffrent then yours.

[netuser26]

stupid question. how much a/c power are u useing. i just made a 10x10 200 plate wet cell and as far as i know there is no current loss. but im still useing around15a to get 30lpm. ive tryed powering my 2500w gennie it worked but backfires every now and then. im not sure how to adjust the timeing. im currently builiding a 600v cell with a v drop of 2 between the plates any idia of the watts to run it. oh the dc numbers mean nothing u need to show the a/c input to realy show the power used.

[MichaelCouch]

Frank Roberts claimed to have run a Ford Focur or Tarus on 30 lt/min. I see no reason you couldn't run a car on that if the MIB leave you alone. That is a big if. Also, you could add back in a cold fog. That should really do it. You can run a generator 100% off of that for sure, try running a 10KW Genset with a timing adjustment to TDC. Have you seen the Anton HHO Generator youtube video

[aterack833]

thats more than my air compresser

[terrymccurter]

Great Job Low amps high volume Lots of uses for that machine keep up the good work

[radeshnarine]

that is alot of hho man.

[johnymetalman2002]

"This can bu used to enhance a 4 megawatt generator."?!?!

Feel free to explain.

[adam3176]

You use alot less energy if you bring the water up to near gas state and apply a coil and plastic tube while water is in a humidifier state.

[water4octane]

There is nothing special about this production of 30 lpm - you see he is using AC from the generator which is powered by GASOLINE - and rectifying it to DC, in actual fact thats around 25 -30 AMPs AC, he is actually using over 7000 watts, you have to measure the power input at the power source whether its a (generaor/city grid/alternator/dynamo etc- not the circuit, the circuit just manages load, in electrical power the only time you consume power is in the form of amps, and thats alot of amps,

[water4octane]

@water4octane

[TheJimmax]

Can somebody please help me here I dont understand what this is for. If this is for a car where do you get 3.840KW to run it? I have seen these big cells before but never doing any thing practical. Am I missing something?

[delvis11]

@TheJimmax There isn't a ton of uses for this setup. I did it to see the high production and how to handle it.

This can bu used to enhance a 4 megawatt generator.

[HHOhybridBuilder]

@delvis11 This HHO generator can absolutely run a 20 kilowatt electric generator. Good HHO production. I love it.

[privacyvideo4u]

@TheJimmax what you said is exactly true...it's like a baby....LOL....nothing at all practical will come from the baby, only the adult....when crude oil was discovered, nobody knew what it was for, gasoline was originally just a by-product of the 1st uses

[saharahottie]

@TheJimmax

you can use them as torches and also inject the hydrogen and oxygen it produces into a car to make it more fuel efficient/healthier/colder and clean it out.

[TheJimmax]

@saharahottie I must dissagree. The energy used in this machine is so great that it would be far more efficent to use oxy. acetylene or oxy. propane for cutting torches. Hydrogen is too hot to weld with and a cell of this size is of no use at all on a car. Perhaps as delvis11 sugests it could be used for a very large generator but as it stands their seems to be no domestic use for this. It is however well engineered and an interesting show piece.

[saharahottie]

@TheJimmax

perhaps,

or to fill up weather balloons-_-

[saharahottie]

@TheJimmax

pluss, he was asking what hydrogen generators were for in general,

not specifically this one, but i have seen diesels use generators like this for fuel efficiency.

[Dri0m]

@TheJimmax i don´t think you need 30LPM of hydrogen in car :)

[leroyjenkins09]

ahh but is it enough to run the generator you are using to create the electricity needed to generate the hydrogen, that is the true test, if it could run the generator, i think you would have something there, because beside the start up, you would truly be running solely off of the water and you could use the generators power for other things as well.

[ForPropertyInvestors]

That's a Scary amount of Hydrogen Man.

[TheJimmax]

Is this for use on a car and if so where will you get that kind of power

[jeracojay]

wow impressive give it to me i will make good use of it.

[monkeys1954]

now that's a generator! that kind of production should be useful in boosting gas milage. you probably need to run another alternator to do it. i am very impressed with your work, keep on with your work.

[delvis11]

@monkeys1954 No you don't need another alternator most of the time. 1/2 liter of HHO for every 1 liter of engine displacement.

[MrFubs]

@monkeys1954 how much drag would 220v be on a alternator to even improve milage?

[HHOhybridBuilder]

HI Steve,  I like the operation of this HHO generator. Excellent. Just one curious question, " If we accidentally soaked our hands on that bucket of water, is there a possibility of electrocution? Is there any 240 volts DC residing on that bucket of water?" ( Just a concern ) Thanks

[delvis11]

@HHOhybridBuilder No there is nothing in the bucket but water and a lot of HHO. I have stuck my finger in there :)

[HHOhybridBuilder]

@delvis11 Thanks Steve. I will keep that in mind and maybe someday depending on how I progress on my financial status I'll be using your 118 plate MASSIVE hydrogen generator on my Water Powered Engine projects. Your HHO generators is the answer.

[novachevyguy]

yes please run the generator on hho

[CHELLIE2408]

Wow nice work :) Thats a lot of hydrogen :) The best I and my sons are doing right now is about 5 liters per min, and thats good enough for me :) Take care and have fun, Chellie

[HHOhybridBuilder]

Wow awesome !!!!!! You are the King of HHO. Steve please may I know....

1-How many volts?

2-How much amps?

3-And plate size? THANKS. I send you a customer about purchasing 5 units of HHO generator. Did he ever contact you?

[delvis11]

@HHOhybridBuilder See my other video's on this build. It is all explained.

[onazolcris]

I understand that you are using arround 4KW, and also your amount of HHO produced are so huge, so i´m proposing you to use this gas to run a 8hp power-plant (arround 250cc engine) that suply arround 7KW of power, then mabye you can try to do a CLOSSED-CYCLE: power plant suply the electricity to run the dry cell and the dry cell produce the HHO to run the power plant, and if you have some extra power mabye you can run any thing else with the extra power... please, try it and let us know :D

[delvis11]

@onazolcris I used to think that couldn't work but after seeing what Zero did it may be possible to do.

[hede88]

@delvis11 So please try it.. You said your gasdriven powersuply was 8kw right? See if you can run it with the HHO please.. Or another, smaller one maybe. If that is possible you have CLEAR proof of over unity which is what we need to proof! The masses needs to know this is possible if it is, SO many people claim they have reached over unity one way or another, this can truly change the world, with videos like yours so everyone can build this all over the world! No more oil!

Jeppe, Denmark

[frank0067]

Some one advise me which generator kit to buy that is over 5 lpm for my van

I been kinda shopping around but come up empty

[delvis11]

@frank0067 see my 32 plate cell on my website Frank0067

[edelgado1]

I thought that with all that production it would. Have you tried it? If it doesnt run a car it shoud increase MPG considerably. Im looking to install a dry cell in my Grand Marquis and I was thinking of making a cell with superior production to better my present gas mileage. Im trully impressed with this unit you have made.

[delvis11]

@edelgado1 The problem with making huge amounts of hydroxy is the huge amount of power it takes. This uses over4000 watts. Thats the equivalent of a 300 amps alternator at full power.

[rick10is]

@delvis11 So would it be considered overunity production?Could it run an 18-20 hp gen-set?

[delvis11]

@rick10is no this is far from overunity. probably 70% at best.

[edelgado1]

Can this unit be installed on a car and would it run with this HHO production? (no gasoline?)

[delvis11]

@edelgado1 No it wont run a car. not even close.

[zgymnast]

First of all, I would like to say you are doing a great job and I really like this vid of yours and others. However, it is very clear to me that most people do not know how to calculate MMW correctly. Or more correctly, people forget that the MMW only applies to the hydrogen portion of the production, the O2 does not count. Thanks for the vids!!

[delvis11]

@zgymnast of course the oxygen counts if we are talking about hydroxy, which we are. I dont understand your point.

[zgymnast]

@delvis11 Unfortunately, the scientists won't see it that way, and that is why they will always use the MMW for the hydrogen only. Oxygen is already free. I know where you are coming from, and I understand that the pure O2 does make a difference, (but that doesn't matter) but it will never count in the formula for calculating MMW in the scientific world (not my rules). Anyway, you do great work and I am not dissing on this at all ;)

[delvis11]

@zgymnast I know your not dissing, Im trying to understand where your coming from and where your information is coming from. We use the oxygen in the formula because it changes the dynamics of the way hydrogen burns in a dramatic way. I use MMW along with Faraday's hydroxy equations for efficiency. I understand that the mainstream use of MMW may be different but we use it as a benchmark for efficiency to Faraday. Thanks for commenting. I love constructive discussion.

[MrFahmifarid]

was that a fuel cell??? so we can convert those water back to H2 and 02 if we put back some power on it.. is it??? i thought the fuel cell can only be use to generate electricity from hydrogen... what type of fuel cell you are using? and how many watt does the fuel cell can produce... ??

[betadryl]

My energy provider (modstroem) just cut the the price of electricity at night to zero... So i thought of this. Why not make hydrogen in the basement at night? :D Anyone got a better idea for arbitrage. Maybe some big batteries, haha

[ke4uyp]

Obviously 1000 ml equals 1 liter. So if we take your number 6.99 mmw divided it into 1000

this should equal the wattage that is required to make one liter.

1000 / 6.99= 143.06 watts for 1 liter of HHO

Now your magic number of 2.4 if it is multiplied by 60 will equal the wattage at 100 percent efficiency.

2.4 X 60= 144 watts for 1 liter of HHO

So according to your data you are still Overunity.

[delvis11]

@ke4uyp . In this video I say I was running about 16 amps and 240 volts. The bottle is rising so fast if I was off by one tenth of a second it would throw all the efficiency calculations off. The calculations are clearly approximate. I don't understand why your pushing your point.

[ke4uyp]

delvis11 is Claiming Overunity in this video

He clearly shows 1 liter production in 2 seconds

He also states 240v X 16A=3840 watts

3840 watts X 2 seconds =7680 watts / 3600 seconds= 2.133

Any number lower than 2.4 is Overunity

Here Is Another Way to Calculate It

3840 watts / 30 LPM = 128 watts per liter of HHO

[delvis11]

@ke4uyp The cell is not running at overunity. The cell was running a 140 degrees. you didn't calculate the amount of moisture (steam). mmw is 7.81, temp compensated is 6.99. thats 90.2% to Faraday. 250@ 16 amps is 86% to Faraday. Calculating LPM with that amount of gas is hard. there is a lot of room for error but nowhere is there overunity.

[merlinspower]

Please let me know what your amperage draw is , thanks ..

[merlinspower]

The 30 lpm is just fantastic ! Well done ! great job. Winter is coming. perhaps you will be able to run your water heater, furnace, and stove with this and save money. Please visit my channel , I support your research by posting your video .

[Iseekoutthetruth]

separation is the key because once you separate the hydrogen from the oxygen you have a pure form of the gas no oxygen bubbles to pop easier to burn

[Iseekoutthetruth]

your raising the bottle with both hydrogen and oxygen not just the hydrogen gas. check out my channel and see how I separated the 2 elements. the hydrogen gas and the oxygen.to get a true reading you need to just test the hydrogen gas not both which you are making right now, separation is the key.

[delvis11]

@Iseekoutthetruth I will check out your channel. I'm measuring hydroxy output. I guess you could say I'm getting 20 lpm of hydrogen. Why is "separation the key"?

[water2gashawaii]

hook up a lawnmower engine and see if you can run it on it.

[altern8energy]

what's your electrolyte temperature after running continuous for 30 minutes to an hour?? The higher the heat the more current draw.. Add a corrosion free radiator with fan after the reservoir tank to cool the electrolyte before it enters the cell. If you keep the heat down, the current will stay where you want it. I've ran straight distilled water and got zero current draw and just added enough KOH to pull 10A and maintained that for several hours with a radiator.

[altern8energy]

very impressive.. the key is to BUILD IT BIGGER!!! If I ever get the money, I'm going with a 24" x 24" plate system at either 62 plates for 130VDC or 124 plates for the 230VDC. Plate surface area makes ALL the difference! What you need to do now is use that 30LPM to either power a propane powered 30KW generator or drive a Stirling Engine that turns a genset, or use as heat source to flash boil water to steam to turn a steam powered turbine to produce power..

[vox1philippines]

@altern8energy good day bro...making a big volume of HHO is very simple now, you only need big money to buy all you need to assemble a big cell.....May i have a request pls? i know u are in the higher capavility reserching for more productive HHO purpose....

Make a small box for HHO cell and run a car.....

thankz....

[altern8energy]

@vox1philippines making a large volume cell for a car can be done. depends on what kind of engine you want to power. like I said, the new hydrogen fuel cell vehicles have a 100KW fuel cell that produces electrical power to run electrical motors on the car. It basically an electric car using a hydrogen fuel cell and hydrogen to produce the power instead of a battery bank. a fairly medium sized HHO cell could power that 100KW hydrogen fuel cell and in turn power the HHO generator.. I need money!!!

[vox1philippines]

@altern8energy thankz for ur time bro...I want my car run on water alone .... mayer and dingel did it in a small scale... bro... i know, inverters, inductors, magnEtism, volts Apms are the ingredients of this 2 guys secrets .... our assignment is, how can we solve the PUZZLE !!!

thankz....

[mikepowers420]

Yup, she's a slick one to say the very least. What an out-put.

:)

[w23trhfyer]

comparing the yield of hydrogen with gasoline (I assume this is)

3000 liters of hydrogen = 1 liter of gasoline, at normal temp. & pressure.

at 60 km/h one good motor runs 15 km with 1 liter of gasoline in 15 min.

with your system you are able to extract in 15 min, 450 liters of hydrogen,

wich is able to move one motor 70% less powerful for 15 km

...but, the energy to extract the hydrogen its very big for this 70% less powerful motor.. i hope, in the future, improvements.

[altern8energy]

@w23trhfyer the key is to build a motor that is designed to run on HHO. I don't know how much LPM you would need to power one of those hydrogen fuel cells that are in the new hydrogen fuel cell vehicles. But those fuel cells are rated at close to 100KW to run the electrical motors. imagine using a fuel cell to power a HHO generator then using the HHO to run the fuel cell.. Would 5KW of power be enough to generate the fuel to power the hydrogen fuel cell??

[jab0805]

Great output. How do you plan to use that much HHO?

[HonKyTanKMaN]

@jab0805 MAKING SOME ROCKET FUEL ! Honda Civic 2 THE MOOOON !

[delvis11]

@jab0805 I have know plans. Just doing this for fun.

[jab0805]

@delvis11 Awesome! I just completed my dry cell. Right now It's just a 13 plate modified lowes 304 blank switch plates. I sawed the ends off and flattened them. Then I cut the corners off at a 45 degree angle on the neutrals. I left a corner on the voltage plates. Im using a brass bolt for the volts. Im conditioning it now. Using only 5 volts. 2 tsp of sodium hydroxide to a gallon of water. Then im gonna do a distilled rinse and run distilled vinegar. It's a surprising amount of gas with only 5v

[StevoJN]

Thats awesome, well done!

[Sirstan2000]

Steve, you're a giant in the HHO arena, nice work pal!

[d3adp001]

your a little slow on the draw there. at these levels you need to go to a much larger test volume. but thats small bits. Its a lot of gas and thats cool. so what ya gonna do with it? huh huh.

[delvis11]

@d3adp001 I have know idea. Do you have any........

[d3adp001]

@delvis11 well blow something up of course....

[crafter2u]

how many volts?

[d3adp001]

@crafter2u did you watch the video? its in there.

[2bigHybrid]

HI...what will be the future application of this monster Gen?..industrial welding machine?, Fuel cell refilling station?, or HHO on demand? If this will be used as fuel to the engine, in your opinion, will this output enough to run 4 cylinder engine with hydrogen alone?

[vox1philippines]

now i know ur ok now.....

so what is your idea using this cell? HYDROGEN for SALE ? well thats cool !

hope our main GOAL is to RUN a CAR on HHO ALONE .... I KNOW YOU CAN DO THAT BRO......

MAKE IT SMALLER AND STALL IT IN YOUR CAR AND,... MR. DANIEL DINGEL IS WAITING ON US.......

GOOD JOB BRO....

[HHOPWR]

Steve, Come on man. You have an 8000 watt generator. You still have half to go. Add a couple of cups of KOH and let that bad boy run. I am betting on over 40 LPM but it will be impossible to measure with a one liter bottle. Nice work but you can do more. I would love to see about 30 amps hitting that at about 150 degrees.

Nice work

Larry

[delvis11]

@HHOPWR I could add more koh but there is a huge flow problem. It is really pushing this design to get 30 lpm. If I were to use larger 5/8 inch ports and hoses and double the gasket thickness I know it will make 40 lpm. At 150 degrees this design pumps all the electrolyte out of the gen and out the output hose. That is what happened in this video. I am now going to tear it apart, clean it out and drill bigger holes. :)

[HHOPWR]

@delvis11 Then media blast the plates and suck it up and make 1/8' GASKETS. There is at least 40 LPM there.

Larry

[delvis11]

@HHOPWR If I get the time and money I may do that. Things are slow right now. not a lot of $ laying around. I'm sure it will pick up.