Added: 3 years ago
From: itwasflaminupgood
Views: 20,391
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:
see all

All Comments (92)

Sign In or Sign Up now to post a comment!
  • Your acceleration sucks.

  • This scooter is not fully assembled when sold that the manufacturer does not state. 3 reasons why.

    1.) brake is adjusted too close to wheel

    2.) motor has really small screws

    3.) chain does not bend to the required half-inch

    It is also not made properly. The battery shouldnt be sideways. Other reasons include no exhaust to protect overheat, unaccurate manual description such as how to ignition start.

    Otherwise it would run like a not-to-expensive car.

  • Comment removed

  • i want to increase the perforance of my xg 470 should i get an x can v.2 and i heard that ufo style air filter is the best performance filter but i want an ada racing filter please help!!!

  • Comment removed

  • Where did you get the air filter?

  • Can you make a video on how  to install the seat and trunk?...Thank You

  • You should put a larger sprocket on the wheel and tranny. Lose some acceleration but gain atleast 7 mph

  • Hi itwasflaminupgood,

    Can you tell me where you got your velocity stack and choke plate?  Monsterscooterparts sells one but it is 1.5" centers and xg-470 is 1.25" centers and only sells the velocity stack. Also, where do you buy the x-can exhaust...I googled but didn't find anything.

    Thanks! Lindquisty

  • outta all xg scooters which one is the best?

  • the fender is loose at the begining of the video.

  • He made it idle faster.

  • you are running kinda rich, it's smoking too much even after you warmed it up for a little bit, and it was bogging when it was at full throttle. Why did you adjust the high speed before you started riding, you don't have to do that every time you ride. Once should be enough

  • i knew it was running rich. it was having trouble staying running it was so rich so b4 taking it for a ride i was trying to lean it out a little.

  • how do u like the x can?

  • very loudddd. like wake ppl up loud and makes me cringe whenever i ride it at night when people are sleeping i fear that im waking all of them up. but its pretty fast now. not really top end speed but really awesome acceleration

  • remove that stupid starter motor its sticking way too much out its better with pull start only

  • is that seat removeable?o ya does it have signal lights aqnd stuff.

  • yes its very removable. yes it has lights and turn signals and stuff

  • Geta goped dont get a china shit crapy schooter

  • or get a car. lmao

  • yo do you hears that bang sound thats the piston slaping around in the cylinder dude if you dont start up your scooter regularly the oil and gas will seperate and the pistone will slap around and damage itself and the cylinder, not good!

  • thats the sound of the exhaust. all u gotta do is shake up the gas tank on the scooter before u start it to get the gas and oil mixed back together.

  • Chinese scooters suck get a goped

    I dont care about the price i have a job

  • hey, I have this scooter. My engine sprocket keeps falling off......do u no what holds the engine sprocket on and where i can get it? please reply

  • you could go to urbonscooter

  • theres a ring pin around the shaft that cones out of the transmission casing that your sprocket attaches to. you may just need to get a new ring pin. i think thats what its called.

  • @itwasflaminupgood C RING 

  • hey i gotta say im diggin the mods you have done to your scooter..... now, i my self own and XG-470 and have been trying to find a place that sells the x-can muffler. Ive done some searching, and most of the sites seem to be out of stock. Tell me, where did you get yours? and help would be be great thanx

  • i have the same scooter... im from greece... i want to mode up my scooter.... can you help me ??

  • how many cc is that????

  • 49cc

  • China scooters break easy you'll spend more time fixing them than you will be riding them so get a goped!!!!

  • not all chinese scooters break down very frequently and go ped are way expenisive

  • i agree, i had a china mini bike it worked great! till i started messing with it. but i have a goped sgsr46r now prety much the same thing its more reliable. but thats because it cost more so i put more time in to it

  • I got one of these. Can I get in trouble for riding them on back roads in NJ? Have you gotten in trouble?

  • i havent gotten in trouble. I couldnt really. where i live in indiana its legal to ride on the streets. call your local police dept non emergency number and ask them the specifications of small motor vehicles. thats how i found out if it was legal.

  • lol sounds like a hpi baja rc

  • sounds like it needs to be leaned out on top speed

  • where should u buy one?

  • Who the fuck you callin a nigger you fuckin honkey salted craker 'flamin' homo motha fucka huh. Motha fucka think your tough talkin shit to a little kid bitch i'll make you get on your knees and kiss my black boot cracker before I rob an murder you an your whole family cracker huh try snappin my back honkey bitch I'll bury you alive while your screaming and enjoy watching you cry like a little bitch.

  • lol you made a new fucking channel to be mr. big keyboard hero. hahaha your fucking pathetic. your the same fucking nigger with the same ol shit. FUCK YOU. im callin you a big ol nigger black stack a shit. haha now is this re3el92s bitch?? you must be. commin in here all mr big man thinkin your hard. you stack of black shit. go get fucked by your bitch. you 12 year old fag thinkin you can actually do somethin about it. fuck you.come here and say that il fuck u up

  • a rasist fight! WOO HOO!!! LOL

  • fuck you your dads my bitch i got a car i want to get the scooter to give to my little brother dont be cryin whem im fuckin your mom and bustin a load all over her tits fag

  • fuck you little dick piece of shit. stop the bullshit you dont have a fucking car. your fucking 12 years old and just discovered the world of masturbating.. congratulations. you half bit pile of fucking shit. aww how cute.. you want to buy your brother a scooter. your your borthers bitch hahah i get it go have fun chuggin your little faggot brothers dick. you fucking asshole 12 year old pussy. talk shit on the internet fucking pussy nigger. come here and talk shit ill fucking snap your neck

  • his dad is your bitch? are you saying blacks are homo??? hahaha faggg

  • fuck you homo

  • fuck you bitch. hahah your my bitch. your asking me about the scooter now u call me a homo fuck you faggot. get a fucking car dick chugger. i dont ride scooters anymore. bitch

  • thanks my nigga

  • i aint yo nigga. stfu wit dat shit

  • is it a good deal if i get one that was ridden like 5 times for 150 dollars

  • whered you but it i really want one for my scooter

  • if i put a x-can exhuast on my stock engine will it break down faster itwasflaminup?

  • no, i havent had many problems, but you have to make sure you have the carburetor tuned right when modifying these engines. because the more power you make it crank out the more fuel it needs to burn and so if you leave it the way it was you will not get the most power out of your engine and it could start to lead to engine problems because its not getting enough fuel.

  • a modified engine breaks down alot faster than a stoke engine.

  • yea because your making the engine crank out more power than it was designed to produce, therefor putting the engine under more stress and causing it to break down more often than a stock engine. yea your completely correct.

  • hmmm thanks for replying. i didnt know why modified engins break down faster. i just copied the statment from a web site

  • oh haha. well yea its true, when you start getting performance parts for it and its starts making more power you have to compensate for it by adjusting the carburetor to give it more fuel. but there is only so much these engines can take. they will eventually crap out. b/c the more power they make now, the shorter they will live. generally speaking

  • how do you install all that

  • do not get one of these scooters i had one they are cheap as hell i had to i had to weld the bottom of the frame 3 times cause it caved in

  • maybe u weigh too much, i have this exact scooter, and havent had a problem with it for 2years (since i got it) just had 2 change a few lights but nothing else major.

  • does it fit on an xg 505 or xg 550?

  • idk most likely not. it didnt fit mine

  • no i think i might get one

  • how do u put tht on just slide it on can u make a vdeo on how (i kno im retarded)lol

  • i actually have a video where i take it all apart and i was going to upload it but i lost the software that allows me to take videos off my camera. so i cant upload it. but do you have a x can?

  • omg all these haters

    |

    |

    V

  • its funny that on the xtreme websie it says that that scooter goes 30 mph and my little zooma 22cc scooter beat it in a church parking lot.

  • its 47cc of total gay

  • hahaha 50cc of kick the fucking shit out of your piece of shit 4stroke fart shit asshole shitbike

  • hahahaha great what the fuck are you talking about

  • i rode my 499 all stock 32 mph!! =) nice vid

  • thanks

  • i got a 499 instead but it is still awsome!

  • i hopefully will be gettin a xg 550 tomorow for b day =)

  • happy 2-week late birthday =)

  • cool

  • oo ok well i will see what i can do thanks

  • and r all these modifications easy to put on by hand

  • well yes you have to put everything on by hand. there is nothing else to put them on by. easy? no. if you dont have a basic understanding of how these engines work then you will have trouble tuning the engine. and tuning is required when you get parts.

  • man i dont know what to do should i get that scooter with the x can or shouod i get the xg505 50cc gas scooter??????????

  • this IS 50CC !!!

    if you live in a state where you have to have turn signals brake lights and headlight then you should get this scooter. and this engine on my scooter is 50CC

  • this scooter DOES NOT COME WITH THE X CAN.

  • get the xg-505

  • coolest...scooter...ever... i have one my self

  • thanks

  • if you scooter dies when stalled its eather you idle is to low, or what happend to mine was the whole air filter wasnt screwed on air tight and it was sucking to much air in and it would stall if i didnt give it gas

  • Is that a ufo air filter?

  • no. i got it in a performance pack with a velocity stack fuel filter and a timing advance key

  • yea it runs when i give it gas and when im riding but if i let of the gas for like 3 seconds it stalls out

  • yea it sounds like the idle jet in the carb is fouled. it could also be the air fuel ratio. it could be running too rich.

  • I think it' the idle screw that is to loose so it stalls

  • no because if hes already giving it gas then the throttle is not touching the idle screw.

  • one more question. Recently my scooter hasn't been idleing and has trouble starting. I spayed some starter fluid in the carb and it started up but wont idle. And if it sits for more than 30 minutes it wont start without starting fluid. 2 weeks ago it was running fine. Any ideas?

  • you may have a dirty/clogged secondary jet in your carburetor if it wont idle. does it stay running if you give it gas? like when your driving it?

  • i got the same scooter for free from people who were going to throw it away and on the deck it says speed400g but is exactly the same as this one except silver and stock, it had blinkers,headlight,and a seat which were all broken. The elctric start still works but i dont have a charger. I changed the spark plug, cleaned the air filter, and gave it a fresh mix of gas. It runs now but only goes around 25. How can i make mine go faster and where do you get all those parts

  • i go to

    partsfroscooters(dot)

    com for all my parts. and i took off the carburetor and filed down the black plastic throttle limiter. being very careful not to let plastic pieces get in the carb. it made my scooter rev higher and go faster but also suck more gas. but worth it. i got mine from a neighbor who was selling it cuz his kid was too scared to ride it. it was brand new.

  • can u do a driving video with the x-can installed?

  • yea i actually have one ready to upload but its not uploading. i donk know why. im trying everything i can. ill make a new one with ALL MODS INSTALLED and the camera filming the speed on the GPS on board. you will also see a fly by at full throttle. i will be great. but first i have to fix my chain. and i cant start fixing it until like june 20something. its not here now. expect it by june 31

  • hi i have a similar scooter, but mine accelerates very slow, when i sit on it and try to go it doesn't even move, i have to push myself to get it going, any help would be appreciated. thanks

  • it might be running too lean. there is a brass colored flat head screw on the carburetor with a spring under it. turn that counter clockwise about 3/4 turn no further.

    if that dosent do it, you muffler might be clogged with carbon. take the muffler move the piston to up position (TDC) and spray BRAKLEEN all over everything, then very gently scrape all of the black carbon deposit off the exhaust port with a flat head screwdriver, being extremely careful not to gouge the aluminum block or piston.

  • and be very sure that no pieces of carbon fall into the engine, it can result in engine failure. if you have more questions or my advice did not work for you tell me and ill try to help you out.

  • thanks I'll try it tomorrow hopefully it will help.

  • well, i did all that, but my scooter's top speed is still 10 mph, i'm thinking that it has something to do with clutch, because the engine goes pretty hard, but no acceleration.

  • yea it might be the clutch. you might need to replace the clutch shoes or springs. or maybe you just need to clean out the clutch bell, it might just be slipping. but take it all apart (if your comfortable doing it) and see whats going on in there. let me know what you found. hope this helps

  • where do you get the mods

    please respond ty

  • partsforscooters(dot)

    com

    i get everything there

  • what size manifold did you use? small, medium, or large?

  • you mean the size of the port on my engine? i dont know. the muffler just bolts straight up to the block. no manifold like thing is needed to install it.

  • What air filter is that and where did u get it?

  • is that the x can v2?

  • man i have no idea

  • No, It is a 1 piston.

  • are you high? he asked if the X CAN was version 2!!!

    any idiot can figure out that this engine is SINGLE CYLINDER!!!

  • Okay, sorry. I didn't know. Don't have a fit about it.

  • not 100% sure but i think around 35. id have to go for a ride with the GPS to be sure. im installling a baffle kit for the x can to make it quieter and hopefully more powerful.

  • yo guys, it fits all scooters. it didnt fit the xg-470 probably because its an older model of the company.

  • Cool, where did u get that X-can muffler and would it fit my xg-505?

  • i dont think it will fit your scooter if it didnt fit mine.

    my dad bored out the bolf holes to make it fit. you might have to do the same.

  • parts for scooters

    dot

    com

Loading...
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more