this brings back memories , we used steel soda pop cans , 3 cut of both ends the 4th one you poke a hole on the side of the base . ducked tape the 4 together . propellant was lighter fluid , load ball then apply a squirt thru base hole then grab by opposite end and whip up n down. that makes fuel vaporize NOW the fun morar fights. lighter to the touch hole.boom heheh fun time in the summer.
very well made mortar... if your are willing to try and get the tennis ball exactly where you want them then try this formula: r=1/9.8 v^2 sin(2x). youll need a graphing calculator but it is very handy to use if you want to rain tennis balls on someone percisely will being hidden. x is the angle, v is the velocity, and r is the range
obviously the logical thing is for you to bring the mortar out into the field and get it set up again, much easier than having the person with the camera just walk out a bit and then resume filming.
Hey errbody... I know i havnt posted anything in a long time, but i got a vid of a bomb made from a 2liter that im gonna upload within a couple weeks hopefully(its on my friends camera). Hope to start uploading more of all the vids i got laying around the house too, lol. I guess you could say im back.
peace, Nater
PS: I am ignoring all the comments and messages asking how to make one of these mortars... its just like a propane spud gun with a 26" pcv pipe tube. Simple as that.
its eazy. get pressure rated PVC and PVC cement (do NOT exceed the max PSI of your weekest component be it the PVC parts or glue). your back end will be your air tank (use a bicycle check valve) and separate the barrel and the tank with a ball valve. do not make your barrel have a wider radius than your tank. respond for more info if you want.
hey dude this rocked, just next time tell the dimention of the tube and make a skrew off lid to put hair spray in or somthin. i love it. im real big into airsoft and im getting my plains 2gether to make an airsoft at4. ill post it asap.
Needed a bigger chamber! Then a reducer from the barrel diameter to the 4inch diameter. would of been better but nice. And maybe an internal sparker instear of lighting it each time!
I'm sorry that I havn't posted a walk-through on how to make one yet. I have been very busy the past couple months. I assure you that I will post a Guide in the near future though.
That sounds like it would work, but if you fill the chamber up with too much propane, there isnt enough oxygen for the explosion, and the ball wont go as far. this is the mistake my friend andy made in the clip "andy's mad skillz".
would be a good bunker buster for airsoft
NUKEUM24 5 months ago
Why is there a police car in the very first picture, like, directly behind you? Someone already call the cops! HAHA! :P
doomsd46 7 months ago
this brings back memories , we used steel soda pop cans , 3 cut of both ends the 4th one you poke a hole on the side of the base . ducked tape the 4 together . propellant was lighter fluid , load ball then apply a squirt thru base hole then grab by opposite end and whip up n down. that makes fuel vaporize NOW the fun morar fights. lighter to the touch hole.boom heheh fun time in the summer.
1abcrr1 8 months ago
very well made mortar... if your are willing to try and get the tennis ball exactly where you want them then try this formula: r=1/9.8 v^2 sin(2x). youll need a graphing calculator but it is very handy to use if you want to rain tennis balls on someone percisely will being hidden. x is the angle, v is the velocity, and r is the range
huntingsurvival 8 months ago
1:28 Thats what she said!
jacobgp1 1 year ago
what did you use to launch the ball?
metaknight95 1 year ago
But I dont think the second shot was 400 ft.........
lukesky1435 1 year ago
lol 2 balls and a shaft
LimitedWard 1 year ago
2:00 haha u should never look down a morter cannon kid
sniperkid4 2 years ago
could u put a pecusion cap on a heavy pit of pvc aka cement filled
james19806 2 years ago
two balls and a shaft eh?
Ganonman2 2 years ago
It could be used as fire support in an airsoft battle...i would love to do that.
skylark0515 2 years ago
i like the op car in the background
duder145 2 years ago 2
a 6 foot potato gun (like i have) makes that thing look like a spit wad launcher. I can hit tennis balls farther than that with my racket!
TnnisPlya 2 years ago
what did you use as fuel?
boomerkid1 2 years ago
butane
CAIDMASTEROFPYRO 2 years ago
hifdheytdfguchjn etyhybvuv
hagrid2125 2 years ago
what size pvc pipe did u use
crazyknexkid 2 years ago
take a tennis ball with you to buy the pvc and which ever pipe the ball fits best get that one
CAIDMASTEROFPYRO 2 years ago
This has been flagged as spam show
this is dumb ass!!!!!
dizzidrummer95 2 years ago
wtf is the point of this, shudnt the tennis ball blow up or something??????
351AussieRob 2 years ago
look at 0.01 there`s a police car in the background
pyroant2 2 years ago
haha i noticed that too!
DevinChief 2 years ago
what gas were you using?
Rkool1234568 2 years ago
lol mad skills!
Mopzboy 2 years ago
good for airsoft
kellikel13 2 years ago
im trying to figure out a cool way to use it for airsoft. any ideas?
scootermaster2343 2 years ago
make like an arm grip and just carry it kinda like a short bazooka/rocket launcher :D
tipsymouse21 2 years ago
thad be sick!!!
Ryrannasaurus 2 years ago
your name is spelled D U M B S H I T and you have no idea what airsoft is
tipsymouse21 2 years ago
watch out behind you, it's the fuzz man!
light24bulbs 2 years ago
how did you build that??? legend.
benm6888 2 years ago
hhahahah your a piglet!!!!
that would suck major ass to have a cop in your house
hcorebabysean 2 years ago
good 4 u
AZAirsoft1016 2 years ago
you got to rasins and a tooth pick
pyxiefrog124 3 years ago 2
lmao
tipsymouse21 2 years ago
yeah whats woth the cop
nigel1144 3 years ago
whats WOTH you?
tipsymouse21 2 years ago
cop car lol?
chickenbreeder4 3 years ago
zippo lighter fluid its the best
ShawnSamLeahUsername 3 years ago
need to put nitroglycerin in the tennis ball
xXxwhitepanther831 3 years ago
Lmao, Andy made my day ;)
Gnash993 3 years ago
Hello
sorry my english is ban
i'm french it's possible to give me a plan and instructions
thanks verry mutch
Catof to France
catof89 3 years ago
This has been flagged as spam show
What are u gay?
papa91j 3 years ago
love the cop car in back round. lol
themaker100 3 years ago
lol ya hes probly like wat the fuck are thos damn kids doin now
AZAirsoft1016 2 years ago 2
lol 2 balls and a shaft
golfingrobert 3 years ago
that's great!, where did you get the building instructions?
Timmie1000 3 years ago
dude your not a bad ass its a fucking tennis ball mortar so don't act all big and bad.
k2www111 3 years ago
too slow to launch im working on a rapid shot mortar but uses air so no boom=( btw the nazies would have over ran that position by now... lol
koolkool524 3 years ago
1:02 = Loser
yellginlaguay 3 years ago
more fuellll!!
tomr900 3 years ago
this thing sucks
it's super quite and hardley any good distance
i hav one that's much better than this
and you used pvc pipe
it's called a tennis ball mortar!
not pvc pipe mortar
cheater!
CrazyMonkeyF00 3 years ago
how far down do you put the balls?
nzmankiwi 3 years ago
nice man is the lower pipe smaller in diameter then the barrel?
karnitasman 3 years ago
how much gas did you go through that day
airsoftguys 3 years ago
lmao his dads a fucking sherif but dont care about kids filling gas in a tube and lighting it lol. i want a dad like that
technoman43 3 years ago
andy's mad skillz XD
FUNNYYYYYY
tsham511 3 years ago
dude that is so cool it barly makes a sound
jerotritter 4 years ago
what do you use for fuel?
stinkbomb13 4 years ago
it looks like he eether uses wd40 or airspray since he puts the lighter in the bottom
golfingrobert 4 years ago
obviously the logical thing is for you to bring the mortar out into the field and get it set up again, much easier than having the person with the camera just walk out a bit and then resume filming.
Vidar378 4 years ago
lol theres a cop car right beside dem
wlogin 4 years ago
these guys are ok
Iceaged69 4 years ago
erm...u do realize there was a sheriff in ur driveway right?
vidwatcher997 4 years ago
i dont think it is illegal. besides it is probably his dad....
golfingrobert 4 years ago
use lynx deodriant, its much better and makes a bigger BANG!!!!!!!!
Darcshadow5 4 years ago
Hey errbody... I know i havnt posted anything in a long time, but i got a vid of a bomb made from a 2liter that im gonna upload within a couple weeks hopefully(its on my friends camera). Hope to start uploading more of all the vids i got laying around the house too, lol. I guess you could say im back.
peace, Nater
PS: I am ignoring all the comments and messages asking how to make one of these mortars... its just like a propane spud gun with a 26" pcv pipe tube. Simple as that.
sufnater 4 years ago
but what did you use as an igniter because thats a damn good igniter
kraftjesse 4 years ago
he used one of those bbq ignitors... but not the ones out of a bbq. u kno u could find them every were!!! like a cheap shop
forkme3 4 years ago
is that propane? and where did you get it? how did you make a stand?
BakerSkateTeam 4 years ago
im thinking of making one with a 6 ft aluminum pipe with propane
rammsteinfanatik2 4 years ago
that would be fun and funny to launch at someone
omfg191 4 years ago
oh look theres a Cop Car behind them :F
AbusiveOwl 4 years ago
around 2:00 min's he looks down the barrel of the mortar.
ww2willyjeep 4 years ago
ya, but the ball wont come out unless he adds the other things to the bottom, so its safe
MaidenSabbathAcdc 4 years ago
i know, but still very funny.
ww2willyjeep 4 years ago
wat do u use as propellant and how
nikv95 4 years ago
u usualy use lighter fluid
saintjimmy49 4 years ago
can you plz mail me a bluprint or somthig
erikblod 4 years ago
aim it at andy lol
gotmesome 4 years ago
andy is a fag
hunterwantsvids 4 years ago
andy looks gay
mattrjim 4 years ago
lol! at 0:12 there is a cop in the backround lol
Malunat13 4 years ago
This is the gayest shit I've ever seen.
Senecal 4 years ago
lol there isa cop behinyou in the first pic
maguox 4 years ago
What did you guys use as propellant and how did you get it to work? Sketches or blueprints would be cool.
GeneralMazaki 4 years ago
its eazy. get pressure rated PVC and PVC cement (do NOT exceed the max PSI of your weekest component be it the PVC parts or glue). your back end will be your air tank (use a bicycle check valve) and separate the barrel and the tank with a ball valve. do not make your barrel have a wider radius than your tank. respond for more info if you want.
spetznaz1337 4 years ago
More info please. Could you e-mail me blue prints if any?
GeneralMazaki 4 years ago
lol
JznAzN12 4 years ago
iy was cool
StupidVideosOah 4 years ago
hey dude this rocked, just next time tell the dimention of the tube and make a skrew off lid to put hair spray in or somthin. i love it. im real big into airsoft and im getting my plains 2gether to make an airsoft at4. ill post it asap.
basslover01 4 years ago
Hair spray? They're using propane, that would be a step or three down for them.
Sylat 4 years ago
thats gay your soposto use a pringles can wraped in duct tape and gasoline or lighter fuluid
andrew5607 4 years ago
quite gay
DukeP00L 4 years ago
what size barrel is that?
HUGEROASTBEEF 4 years ago
it was some very odd size. the guy who gave it to me bought it in florida for a sprinkler system i think... im wanting to say 2.6"
sufnater 4 years ago
did it fit well?
LockINC 4 years ago
how did u build this and what does it use as fuel? you light something i see but i cant tell what.
finndude0 5 years ago
it looks like sodering propane to me. in the store they had it exactly near the pvc pipe.. lol
LockINC 4 years ago
Nice mortar.
Petzkele 5 years ago
hahahah...if u havent noticeed..the cops are watchin ya
indianian1195 5 years ago
dude...looks like the cop car is on their driveway (probably their father lol)
rabrams420 5 years ago
take 2 tennis balls screw a chain to connect them and let loose. When you feel wild do that and aim at your friends feet.
kpak44wh 5 years ago
c the cop car in one of the pics? lol
nohomers232 5 years ago
p.s. where can i get those plans
anikid1 5 years ago
u r using too much propane or beutane
anikid1 5 years ago
i really love that sound.
IrieMotion 5 years ago
fryed-wen u shot 2 balls i think were urs can u chek make sure u have um
nsizzled-andy duz hav mad skillz!!! (cough*)
fryednsizzled 5 years ago
you should try modifying a shell that explodes bbs lol
roland978 5 years ago
That's probaly a science project or something...
PARTYTANK76 5 years ago
Needed a bigger chamber! Then a reducer from the barrel diameter to the 4inch diameter. would of been better but nice. And maybe an internal sparker instear of lighting it each time!
Tolemanserious 5 years ago
andys mad skillz was the best one how fast did it go? 200kpm? (killometerspermellenium)lol
rsclans2006 5 years ago
Hey can you tell me where i can get plans to make one.
thanks
ZEDET7 5 years ago
dude? ur dad a cop? if so. u should consider urself lucky ur dad alows u to do it.
ShortyStud101 5 years ago
no, just lives next door. i don't think he knew what we were doing.
sufnater 5 years ago
haha thats swee tho
ShortyStud101 5 years ago
dude, you should paint it with brown, white and gray prints, desert warfare style.
1ns0mn14 5 years ago
really nice stuff, does anyone know a step by step guide to make a nerf rocket mortar or any mortar of any kind?
Jagerdelights 5 years ago
I'm sorry that I havn't posted a walk-through on how to make one yet. I have been very busy the past couple months. I assure you that I will post a Guide in the near future though.
sufnater 5 years ago
yea i found out how to
roland978 5 years ago
one tubby tubby!, two tubby tubby!!!
Pootitang 5 years ago
you shoulda really filled that thing up with that gas or whatever you used, that would've been awesome
mguitar 5 years ago
That sounds like it would work, but if you fill the chamber up with too much propane, there isnt enough oxygen for the explosion, and the ball wont go as far. this is the mistake my friend andy made in the clip "andy's mad skillz".
sufnater 5 years ago
whats with the cop car!
sk8foradio 5 years ago
How'd you make the bi-pod for it. The thing that holds it up
buttfungus1 5 years ago
2 peices of skinny pvc pipe, some pvc glue, and copper wire.
sufnater 5 years ago