5G6 are naturally noisy, but if you put a good lube on it and proper gear mesh you will lessen the noise. Its more noisier than picco-z because it runs on 2 brushed motor.
bro,, may tanong lang ako alin ba mas maingay lumipad ang walkera 5G6 ba or ang picoo z kasi apartment lang tong tinitirhan ko medyo bawal kasi ang maingay. ang ganda ng 5G6 mo galing lumipad, yun lang po ang tanong ko.. salamat kabayan!!!
I used a piano/music wire bent to form for a skid then i put a plastic tubing, its kinda heavy i think around 3g but its durable enough to protect the gears beneath the skids. The pinion i used are the same pinion for the 5G6. i just replaced the motors with 4#3, i think 4#3 has more rpm that 5G6. Also i swap the wires because 4#3 motors have different polarity than the 5G6.
Does it work? Becuase at the moment the 5G6 seems to be too heavy for decent flight time would this give it the extra lift I need. the heli wieght is 62g.
Good
MrCzesiek99 2 years ago
parts for this helicopter are widely available online.
daky1 3 years ago
is this helicopter very fragile becuase i think theres no spare arts, will its blades break if you crash it against a wall like other 4 ch
horaciorappa 3 years ago
parts are easy to get for this.
smidge146 2 years ago
This is a 4 channel right?
sheetole 3 years ago
yes its 4 channel aileron, elevator, throttle and rudder.
Psicrest27 3 years ago
5G6 are naturally noisy, but if you put a good lube on it and proper gear mesh you will lessen the noise. Its more noisier than picco-z because it runs on 2 brushed motor.
Psicrest27 4 years ago
what does trimming mean?
cloughy95 2 years ago
would a silicone based lubricant be good?
speedstakerguy 2 years ago
bro,, may tanong lang ako alin ba mas maingay lumipad ang walkera 5G6 ba or ang picoo z kasi apartment lang tong tinitirhan ko medyo bawal kasi ang maingay. ang ganda ng 5G6 mo galing lumipad, yun lang po ang tanong ko.. salamat kabayan!!!
aye2000 4 years ago
I cant believe it!! awesome... hehe..
vespaboy692000 4 years ago
I used a piano/music wire bent to form for a skid then i put a plastic tubing, its kinda heavy i think around 3g but its durable enough to protect the gears beneath the skids. The pinion i used are the same pinion for the 5G6. i just replaced the motors with 4#3, i think 4#3 has more rpm that 5G6. Also i swap the wires because 4#3 motors have different polarity than the 5G6.
Psicrest27 4 years ago
How did you make those skids. So many questions needed to be answered.
malcr001 4 years ago
What did you do about the pinions did you leave the 4#3 ones on or did you replace them with the 5g6's?
malcr001 4 years ago
Does it work? Becuase at the moment the 5G6 seems to be too heavy for decent flight time would this give it the extra lift I need. the heli wieght is 62g.
malcr001 4 years ago
why the hell does it say indoors????
JLTantrum 4 years ago
It was flown this morning January 15. Here in West Covina California.
Psicrest27 4 years ago
Dam dude....was this flying done today? What part of the world has this great weather in January?
skid987 4 years ago