Endorphin Backflip Tutorial by -=ZERO=-

[TheAlexey3run]

LoL!!!!

[superIsac1]

When I am making him pose the hole body moves with the bodypart.

[IHEROBRINEI]

<3 thx

[Falconoflife]

I went to the hospital because of this vid. I'll give you a cookie if you figure out why.

[MyLifeOfGuitar]

@Falconoflife dont tell me!!! the legless and armless black knight showed up and you went to hospital with deep bite wounds to your neck and lower thigh??

[Falconoflife]

@MyLifeOfGuitar wrong

[marcomad81650]

thumbs up if you got frustrated with this and said screw it back to black ops

[Dendenzoe1]

thanks dude...

[fingerdude98]

If you don't want to tweak it as much to balance use stumble first

[dragosh3003]

What do you press to block a part from the body ? I mean like when you said not to move the sholder? Can you please tell me?:D

[Daxster1995]

@dragosh3003 You probably already know, but you press the right mouse button on the part you want to block ;)

[Imhappywithsanta]

Thank you so much i finally know how thank you im going to sub!

[shadowblackions]

as the shaft rotates accurate, because when I see a part of the body rotates it does not select any of the lines, go to either side, is a bug in endorphin 2.7 LE?

[gumpennudel]

thanks it works

[gumpennudel]

1:28 its my on the toilette

[WUNDerDUDe2312]

Awesome thanks it actually works

[MadPainter123]

can you lock the person in place when you rotate tham? sorry im new to endorphin:P

[MegaSuperlame]

@MadPainter123 yes i can u can make his hands lock and do tricks

[Shadowcatanaya]

how do you do it so that your simulation character doesn't move when you rotate its leg?

[KiwiHardy]

@Shadowcatanaya i wanna know the same thing

[alden6644]

@Shadowcatanaya right click the area you dont want to move

[cvc49]

Thanks man! Very helpful!

[50psp]

Thanks dude!!!! You helped me a lot.

[vellowfilms2]

Thanks Zero apreciate it i finally know how to use active poses ill subscribe for this :)

[FzMonsta]

Not only did I learn how to make a back flip but also how to use active pose which I didn't even know about. WOO! I was gettin sick of only using behavior events.

[MrAdelinxxl]

how to move camera?

[nickf570]

@MrAdelinxxl click on your mouse and move it.

[gixxerD66]

mine dosnt stand he just sits what do i do

[TheKidsexchange]

When i do it my whole body Flips out

[jake17124]

i put the body foetl behavior to make to do the crawl it worked

[cory18011801]

I did it!!

Yesh!

[xaxol0]

THZ FOR THIS TUT U HELPED ALOT SUBING ! ! ! ! !

[AK47317]

no answer :'(

[Rikdakidd]

hey thanx for the tutorial

look at my vids

theyre based of what i learned from u

[neotheleo12]

dude thanks alot i even got the endorphin to put its hands down without it stumbling

[sergeant892]

when i put the constraint on he goes flying different directions and his body is in pieces. any advice?

[JeffHardyRVD23]

i dont get it

[WUNDerDUDe2312]

THANKS YOU MADE ME REALISE SOME THANK YOUUUU. Nice tut anyways lol

[daliusr1]

when I try to rotate the hand or foot and then the whole body moves. how to make it not move?

[rctwik]

someone who knows what a BackFLIP is =D

[rctwik]

@rctwik my bad

[ugguyan3131]

how do you move things without moving some parts??

[WUNDerDUDe2312]

@ugguyan3131 use the normal move tool instead of the pose move tool

[daniklol9]

moc si mi pomohl

[andreasboy40]

Nice

[sloberknocker1096]

i cant make my endorphin pose cause when i make him orange i lag ass loads

[Twist3rD]

Then you have got a shitty computer

[sloberknocker1096]

no shit i wanna no if i can dl aytthing to enhance my performance

[Twist3rD]

Nah, but maybe delete some unwanted stuff

[sloberknocker1096]

i got 82% freespace on my c drive i got 186 GB left out of a 225 GB hard drivr

[Twist3rD]

What about your RAM?

[sloberknocker1096]

i really dont know

[zyllyphic]

@sloberknocker1096 if u have a nvidia graphics card try this.

go to the nvidia control panel. then change the preference to performance. it won't look as good but it won't lag. if it does still let me no.

[sloberknocker1096]

@zyllyphic nah i got ati but i will still try

[sloberknocker1096]

@zyllyphic where at in ctrl panel is it

[zyllyphic]

@sloberknocker1096 its got nothing to do with the normal ctrl panel. go to ctrl panel any way and type in search "[your graphics card brand] control panel" i only think this works with nvidia but you could try with anything else.

[NewFazo]

Excellent tutorial but, I can't do poses perfect like yours so the backflip is shit... can you upload your poses? thanks a lot and sorry for baad english.

[NewFazo]

use right click to "freeze" a body part.

[crazyserega1994]

@NewFazo thanks you, you helped me so much!

[AEIOU123454321]

Awesome Tutorial & Backflip 5 out of 5

[nisse123nisse123]

when i increse the strenght of my aktive posing the fingers start to flip as HELL when you simulate, it´s not that big of a deal but for a video on youtube people will notice, so plzzzzz help me

[eat74]

@nisse123nisse123 dont increase past 15-20

[munkyb0y4]

detailed and long but bloody awesome!

5* subed and commented just for you god that was awesome

[Skelettonn123]

thank you it helped a lot

[jasonf00h]

how do you lock one part of the body so it turns gray

[munkyb0y4]

right click it

[whiteyorm]

GREAT!

[Funnystuffdis]

very nice, an excellent tut 5/5 :P

[Armorstick]

5/5 very good Can you make a tutorial for jump kicks please?

[Roflpwnzors]

how do i make a run motion?

[Gekoify]

dude, how do you zoom in? i haven't a slightest idea. :[

[WilchBorisRyan]

How the hell do you copy and paste the pose?

Also how do you move certain parts of his bod without all of it moving? Thanx, help would be appreciated.

[ZER0Endorphin]

Copy and pasting the pose is the same as copy and pasting any other thing. Just press crtl + c to copy, and ctrl + v to paste. After you have pasted the pose is automatically selected, so you can drag it with the mouse.

Moving certain parts is also easy. Right clicking the joint will stop it from moving.

[WilchBorisRyan]

Its a little too fast. Slow it down a bit next time.

[ZER0Endorphin]

I had to speed it up x2 because the origional recorded file took 18 minutes and I wanted this to be a one video tutorial. some scenes that I have made have taken up to 2 months to complete.

[AK47317]

@ZER0Endorphin dude how u move the character body without moving the other part of the character body?

[vellowfilms2]

@AK47317 to move parts without moving the whole body you have to right click joints to freeze them and ctrl right click to freeze additional joints i had the same question so i decided to mess around with the program to find out how and finally figured it out your welcome :)

[AK47317]

@vellowfilms2 soz man.. u reply too late i already those app :( i play something :o but :(

[AK47317]

@AK47317 maybe i just downloaded today :D

[AK47317]

@vellowfilms2 na nvm i just downloaded :D i getting exited :D

[KiwiHardy]

@vellowfilms2 but right clicking brings up a menu

[Nobby76]

@KiwiHardy Right clicking on a body part causes it to go grey, aka locking the body part on place. as an example if you lock the hip, you can bend the upper body and the hips and legs will not rotate. If it brings up a menu then you are not clicking on the body part properly. its that simple.

[Teenager34]

thanx man!, i'll show you my backflip...vid response

[skeightnight]

i made mines backflip over a chair and off the chair

[DoWnEdByRiFlE]

I did this but my guy is not high in the air as yours is..How is that?

[ZER0Endorphin]

Two reasons.

Number 1: Your crouch pose isn't low enough, so there is less thrust from the extension of the legs in the second pose.

Number 2: The strength on the second active pose isn't high enough, giving less thrust from the crouch.

Make sure ALL of the blend periods are set to 0. It would also help if I could see the scene, to give tips and so forth.

[r3dh34d32]

how do you select the joints in the pose that they're grey and the joints behind it aren't moved???

pls tell me

[ForsakenSoul14]

press right click to freeze a joint in place

[r3dh34d32]

thx a lot :)

this will help me very much

thx

[Bloxy123]

Thanx a lot, I needed help on this.