My PLL's (last step of CFOP method) all 21 algorithms

[MrPlayboy00008]

Thanks!! :D

[79bommer]

do u still use those algothrms til now?

[miniwilly0306]

what cube?



[tramnamdoicho]

I hate G

[alexjohnlockwood]

Jb is ridiculous! I've been using the wrong algorithm for 5 years... thanks for sharing, Erik!

[mountainScooter]

Wicked..

[mountainScooter]

Nice.. Very nice.. enjoyed.. great job dude!

[adriantkst]

What cube is?? Is too soft

[Richardtola1]

i liked the r left is very fast only r and u algorithms are very fast

[MrScruzzy]

ty erik, still the best pll explanation imo... the sexy j is just sooo... sexy^^

[ericreese20]

Excellent, thanks a bunch for the left R perm and one of the G perm, got all my plls sub 2 now, though it took me about an hour to get that G perm sub 2 <_<

[Braavobitch]

Dunno if this is posted already, but im pretty new in cubing and found randomly a way to solve the V very very similar to F just changing 2 turns...

F: R' U2 R' d' R' F' R2 U' R' U R' F R U' F

My E: R' U R' d' R' F' R2 U' R' U' R'F R F

(just du U instead of U2 in the beginning and remove the U turn at the end)

But u r still awesome :D just find it easy to learn two so similar :)

[Kinjutsuu]

Woow, I've been hating Jb, because I usually hate cube rotations and/or double layer turns... but your "cool" J is really AWESOME with that finger trick!

Thanks a lot ; )

[naker115]

you can make the v as the f but without that last u´and i think is easier

[naker115]

at the e i push back with my left ring finger

[camaroni8]

Best J1 alg: (R U2 R' U') R U2 L' U R' U' L

[mynameisdarthtater]

Did you go around trying to find the least fingertrickable L perm possible? Because I think you found it.

I like x U2 r' U' r U2 l' U R' U' R2.

[oprah62]

have you changed any of these?

[TRex266]

How fast can you perform the H-Perm?

[caddyboy12]

i dont get perms (no pun intended) when i do it, but my way probably takes a whole lot longer (under 2 monutes) but mine isnt lubed or anything, its straight off the shelves

[Psychokinesismaniac]

I LOVE the way that you do M2' !!!!

[xxoxia]

Hey man, not sure if you know already, but there's an A perm that is just like the J perm. Instead of doing x, do y' so the solved corner is to the UFR spot: R U R' F' r U R' U' r' F R2 U' R' U'. Of course, just reverse it for the ccw case.

[LNOL]

Since using your algs, I love slice moves.

[Itachipermai]

hey can i use any brand of silicone spray?

[wiiwillrockyou1]

wait i blinked start over :P

[faroeq33]

love your m-slice movements. And thanks for the fingertrick for M2 move

[ilikechess1]

i had to favorite this 'cause the music was so good and so was your skill =D

[ritzip]

was is das für ein zeichen auf der weißen seite  DM???

[Kemokeme]

what cube??

[taiduc95]

Awsome G4, smooth G2, I don't understand G1, G2 is like G4: Awsome but hard fingertrick.XD

oh, and nice J2.

[byorda]

I just need a smoother cube though

[KnowledgeReference]

I like the way you do the M2 moves, thanks for making this video, I'm a little faster on my H and Z perm now.

[NoobDeath132]

first song name?

[i656ier]

Can you please put the starting time of each PLL in the description? That way it will be easier for people to look up the one PLL they are having trouble with

[frk17]

Good suggestion! That wasn't possible yet when I made the video ;-)

[fenhirbr]

So did you get used to this G4 or changed to another alg?

[frk17]

Nope :P

[fenhirbr]

"Nope" to the "get used" or to the "changed to another alg" ? =P

[fenhirbr]

yes you can.. thats the idea of 2 look PLL =P

[pacificaspieler]

omg this was so helpfull to me :'D

instead of 16 turns i have now to do 7

thats great ! thx

[redbeltom]

thats a nice cube where did you get it?

[taiduc95]

Type C

[Tiw92]

And also the ones of your website?

(F R U R U2 R' L' U R U' L U2 R2 F' and R U2 R' U' R U2 L' U R' U' L)

Are you going to show us all of your OLLs? :D

[Tiw92]

Do you still use all of the algs, Erik?

I just can't believe that you use the 17-move Y-perm, because you never mention it on your website^^

[frk17]

yep

[LNOL]

Everyone does. It's long, but it's fast.

[IPwnAllAndLeaveNone]

@Tiw92

What? Theres a faster Y?

[Gollum9993]

I think I'll just use this video to learn PLL instead of that printout I had. Thanks for making this!

Also, you just got yourself a subscriber.

[frk17]

I'm glad you found it helpful!

[riffz]

The N2 is so much better than the one I've been using. Thanks.

[johnnixspirit]

thamks

yr video hlp me a lot.

now i can solve the cude in 20+sec.thx

[ben1996123]

your t perm is awesome

[Lpmcmoe3]

IN one of ure algorithms u say

"if found this one myself useing CE"

What is CE???

[mousy2294]

That actually did make me want to work on my slices. Btw, what brand do you use?

[FCCZJ1903]

Yay :D 100th comment :P

I think at those U-Perms with M-turns it's pretty easy to DNF a attempt... :/

[frk17]

Hmm, I had a lot of MU PLL's in competition, never DNF-ed one of them.

[FCCZJ1903]

YOU maybe not ^^

it happen's alot to me, that I want a fast PLL at a great solve and I get Z or H Perm, I get +2 or DNF pretty often :P

Luckily not official... I also need to learn non-M-turn-PLLs for bigcubes...

What do you use?

[brilliantsam]

I love all of them! Especially the left "R" and "J". Although I know different ones for those it's very nice and usually handy to have ones you can perform from different angles. I hope you don't mind me using some and I really hope you make a full OLL video, or even two of them as there are too many to cover in one properly. XD

[danyiel7]

take 5

[ben1996123]

what is the song called that starts on 3:00?

[danyiel7]

take 5

[friktingman03]

pls teach us on solving the last layer... pls??

[rudinieuwenhuis]

Wow, je J2 is echt briljant en veel soepeler dan die ik op badmephistos site gevonden had. Superbedankt voor het sharen man. (pb 27, avg sub 40)

[davcar94]

IDK what it is about your video but it just makes me happy.. I already know how to solve a cube but when i clicked on ur vid i said "ah not another tutorial.. ohh.. the music... so... relaxing..and watch those hands at work.. perfectly synced"

[kenobi8627]

Hi Erik! Nice video, nice moves, nice music!

If you find time, can you please let me know the last music track of this video! It's a very nice jazzy track. I often hear this somewhere, but I never know what it is.

So when ever, thanks a lot!

[danyiel7]

take 5

[luchodevp]

Easy always you do the same movements

[YoDaPro]

Wow, your pll speed is just insane! The most impressive alg is the one @ 5:25!

I'm currently learning all the PLL's and my PB is 45.35 with the 2look PLL and i hope i will get 10s faster with full PLL :D. But i'm proud of my 2*2*2 Solve in 5.30("oll" and "pll" skip).

[JimmyGr90]

very nice song on 2:57 :) reminds me of cantaloup island

[8472HeMan8472]

I like the J 2 ( 4:57 )

[skibur48]

damn your slices are perfect!!!!!!!!!

[TheElgee1980]

Fire is a great song. I think you´re greater;) Your PLL´s give me some change to challenge Anssi...

[LethalEn4cer]

Holy fucking shit mate, that's incredible!

I'm only a beginner myself and only got LBL down pat about 2 months back, now I'm currently working on F2L for the Fridrich and I'm absolutely astonished at the speed at which you can do this!

How long have you been cubing mate?

*picks up jaw from the floor*

[koenarens]

ok ik moet zeggen dat de muziek echt relaxt is xD en weet je of er toevallig recent een nederlands contest op het programma staat?

[frk17]

bedoel je het Dutch Open? Uiteraard weet ik daar van

[koenarens]

jah had het nu ook al gezien ;) en ga er zeker heen ben vooruit gegaan sinds benelux open :)

[PowderPuffBoy]

what type of cube is that?

[lordapokalypse]

rubiks diy core type b cubies

[lamecuber]

hey Erik, thx for this vid, do you have another vid for your OLL's?

[beingforitse1f]

Hi Erik, I can't see quite clearly: for your M2' moves when you set up with an R' do you only use your ring finger to move the M layer or do you use your ring finger then your middle finger?

[ben1996123]

you should do an oll one :) i know all the pll's but i dont know how to approach learning the oll's

[79bommer]

@ben1996123 ya, it would be great if that happens

[ben1996123]

@79bommer

wai you reply to 2 year old comments D:

[79bommer]

@ben1996123 is that a question u ask me?

[ben1996123]

@79bommer

jarses chinarses

also, i still dont know full OLL lol

[ffsapher]

Do you use some new algs now, or do you use only algs in this video?

[zecod]

what is the m

[xiceyx90]

i think m is middle benson.......

[Arycke]

M is the middle layer, E is the equatorial layer, and S is the standing layer :)

[ben1996123]

the slice between L and R

[Hippievwbus94]

I love ur videos!!! Ur great!!! And this is really a helpful Video!! But I´m just learning the 2-look Oll´s and Pll´s... I´m tooooo lazy to learn all 78 Algo´s.. respect.. 5*

[stupidkidswithcamera]

What kind of cube u got? Is it a DIY, or did you bought it so good?

[RookieN08]

thats rubik's core with type d cubies. I think he sand the pieces

[RookieN08]

or cubenjoy cube

[frk17]

I write with right but I brush my teeth with left and eat with chopsticks with left but throw darts and play table tennis with right... so depends what activity:P

[Mokupo]

Dave Brubeck for the win!

[frk17]

high five! :D

[Hippievwbus94]

xD great Video!!!!

[Chaotischesneutrales]

so after practicing J2 for 30 minutes it is almost up to my old J2 time...

Old J2 L' U R' z R2 U R' U' R2 U z' R U'

[123asop]

J2 was really weird.

[frk17]

it's fast though :D my favorite PLL alg

[123asop]

Looks like it'll be mine soon XP.

[Chaotischesneutrales]

i am going to try that one. even though my current one is really fast i will give it a shot. =D

[123asop]

Your current one is pretty fast, might use it :D

[reddinosaur7]

do you have a website of the algs?

[joejoetube1]

Erik... this is great and I've learned a ton from you. But, brother.. can you please give the algorithm for G1? I'm not following. You write f at the beginning . .but, you do an x move first.

thanks!

j

[Drazarian1021]

holy shit man...how do you do those algs so frigging fast!?

[Gaggio23]

Is it a DIY?

[SaiKangCubers]

wads the 2nd song

[SmithSolver]

Take 5

[Lithusas]

Hey, I wonder what kind of cube are you using? Couse it's realy fast and smooth... :)

[theWestonian]

so you dont like the 2 gen algorithms?

if so why not?

[frk17]

first of all.. MU is also 2 gen ;)

2nd of all.. I love the RU ones too I just like the MU ones even more. :)

[theWestonian]

oh yeah MU is 2 gen i forgot about that

haha

i guess if our cube is loose enough like yours the MU ones work great

i mean i cant tell you that one is better than the other because youre the corrent WR holder!

haha

[wildcats202]

What cube is that and what lube? Thanks

[bobjoebob200]

I need to work on my m slice

[guidodobboletta]

i love your slice moves and your jokes

"you want to grab a cube and do the same slice moves" lol

and i really did want...but i didnt succeed lol

[Jimohazard]

NICE...

[alexhack4ever]

i can't ove the ''m'' layer.how should i put my figers?

[dh144498]

holy crap, nice finger tricks man.

[MiguelPSk8]

have u considered using U R' U' R U' R U R U' R' U R U R2 U' R' for Z perm i think its faster...

[michaelddrgod]

jesus!! ur soooo fast at those slice moves!! haha the only problem i have is when i do the U move it doesnt line up perfectly every time and then i get these minor locks on the slice moves....i guess im just not god status like you...haha

[sv00013]

wow these pll's are probably the best ever!

[Xclann]

man, i can never get turning the "M" good/fast.

is your cube loose?

what's the key factor to turning "M"s fast/smoothly?

Thanks!

[suphermc]

wow u r really good NOT

they dont work

[frk17]

wow you are so good then... NOT

learn notation and watch the vid. Its impossible to still do it wrong with the vid AND the alg...

[joshwanakamik]

you like ur slice moves eh lol

[joriami]

Wat voor kubus gebruik je? En waar kan ik die vinden?

[frk17]

hoi, die vraag is niet 123 uit te leggen maar je kan het antwoord vinden op de FAQ van m'n site erikku 110mb com

[Vulosity]

woah. what language are you speaking?

[frk17]

I'm Dutch ;-)

[Geco180]

Do you use a DIY cube or a "store bought" cube?

[shananay]

dont get to see many videos like this. I will be using some of these. thanks erik. It just makes more realize even more how amazing the top speedcubers are, and how much I will never be one.

[zzzonked38]

Actually I think your slice moves aren't that great. You don't (can't?) even do double trigger M'2, and they don't really flow nicely with your U moves (as seen in your H perm). Definitely room for improvement, work on it :)

But I like your "bad" R, think I'm gonna use it...

[rowehess]

he did his U perm in like .5 seconds...

[fanwuq]

No way, man. Erik is the master of the MU algs. I like MU algs too. Especially my Z perm.

[qwerasdzx1]

hey i agree. work on ur slicing erik

[aldrin2ace]

hey, can you do a video tutorial on how you do you F2Ls? thanks.. =)

[joshwanakamik]

he has one

[19Marvolo93]

I use for Z my alg:

M'U'M2U'M2U'M'U2M2U

[cubeCAT13]

the J2 was really weird.

I can't believe how fast you do those algs.

[jazzthief81]

The way you do the slice move algorithms is absolutely top class!

The other cases are more mainstream but still very nicely executed.

[tagabukid15]

can you post your one step stop or f2l algorithms or solves of your f2l? great video! amazing m2 moves!

[shaopaog]

your M2 is so fast!!

[ABQMagni5]

What a nice cube! What type of cube is that and what type of sillicone do you use?

[TheRealRslive]

these are hard to execute for my fingers:D

[cubestack]

Nice video, but for Ja isn't it faster to do

R U2 R' U' R U2 L' U R' U' L . I dunno, I switched after i realized this one worked for me. But i doubt it matters for you since you're already so fast xD

[frk17]

not for me, I can do both in about the same time, only I lock a lot on that alg. I never lock on the one I use.

[appler95]

where did you get the cube from

[Unksoul]

Ah you do M2' for U, Z, and H, it seems awkward for me to do it that way, but if it's faster...

[zielaczek]

it's a good cube :)

[Einstakonan]

Hehe M slice madness! Good use of youtube annotations too.

[esquimalt1]

nice M slices lol

[kingeek9]

awsome

[rxbeef]

oh erik, thank you so much for sorting out my fumbly u perms :P

[Azian77]

i like your G perms because theres no cube rotations =]

[cubes4lyfe]

LOL its a remote...

nice erik, I think I'll pick up PLLs again.

[joejoetube1]

thanks Erik!

[OPCube]

Nice one Erik :) I just don't do M slices :s but hey great avg on SC! i was 113! i injured my hand badly so i'm OH cubing now.. :/